High-Capacity Heat Sinks for Oil
For greater cooling capacity and higher flow rates than other heat sinks for oil, these have a large fan. Also known as oil coolers, they're commonly used to cool hydraulic fluid and lubricating oil in cylinders and compressors. Cooling capacity is based on an initial temperature difference of 50° F.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling Cap., Btu/hr. | Thread Size  | Ht. | Wd. | Dp. | Heat Sink Material | Max. Pressure, psi | Max. Flow Rate, gpm | Max. Temp., °F | SAE Trade Size | Each | |
Female UN/UNF (SAE Straight) Threaded—For Use with Oil | |||||||||||
| 12,000 | 1 1/16"-12 | 13 3/4" | 13 3/4" | 12 9/16" | Aluminum | 377 | 30 | 250° | #12 | 00000000 | 000000000 |
| 20,000 | 1 1/16"-12 | 14 1/2" | 14 1/8" | 16 15/16" | Aluminum | 377 | 35 | 250° | #12 | 0000000 | 00000000 |
Overall | Bolt Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling Cap., Btu/hr. | Thread Size | Ht. | Wd. | Dp. | SAE Flange Size | Dia. | No. of | Ctr.-to-Ctr. | Heat Sink Material | Max. Pressure, psi | Max. Flow Rate, gpm | Max. Temp., °F | SAE Trade Size | Each | |
Female UN/UNF (SAE Straight)—For Use with Oil | |||||||||||||||
| 27,000 | 1 5/16"-12 | 15 15/16" | 16 1/8" | 14 3/16" | __ | __ | __ | __ | Aluminum | 377 | 50 | 250° | #16 | 0000000 | 000000000 |
| 32,000 | 1 5/16"-12 | 15 15/16" | 16 9/16" | 16" | __ | __ | __ | __ | Aluminum | 377 | 65 | 250° | #16 | 00000000 | 00000000 |
| 44,000 | 1 5/8"-12 | 19 9/16" | 22" | 15 3/8" | __ | __ | __ | __ | Aluminum | 377 | 60 | 250° | #20 | 00000000 | 00000000 |
| 76,000 | 1 5/8"-12 | 24" | 25 9/16" | 16 3/4" | __ | __ | __ | __ | Aluminum | 377 | 65 | 250° | #20 | 0000000 | 00000000 |
| 90,000 | 1 5/8"-12 | 24" | 26 3/8" | 18" | __ | __ | __ | __ | Aluminum | 377 | 75 | 250° | #20 | 0000000 | 00000000 |
| 126,000 | 1 5/8"-12 | 25 7/8" | 30 5/16" | 19 1/2" | __ | __ | __ | __ | Aluminum | 377 | 80 | 250° | #20 | 00000000 | 00000000 |
SAE Flange—For Use with Oil | |||||||||||||||
| 205,000 | __ | 30 3/16" | 37" | 23 3/16" | 2 | 0.51" | 4 | 1.688", 3.062" | Aluminum | 377 | 115 | 250° | __ | 00000000 | 00000000 |
| 238,000 | __ | 33 1/4" | 39" | 23 3/8" | 2 | 0.51" | 4 | 1.688", 3.062" | Aluminum | 377 | 120 | 250° | __ | 00000000 | 00000000 |
| 356,000 | __ | 38 3/8" | 43 5/8" | 29 1/2" | 2 | 0.51" | 4 | 1.688", 3.062" | Aluminum | 250 | 150 | 250° | __ | 00000000 | 000000000 |
Heat Sinks for Oil
Dozens of fins and coolant tubes quickly dissipate excess heat. Also known as oil coolers, these heat sinks cool hydraulic fluid and lubricating oil in cylinders and compressors. Cooling and flow capacities are based on 50 SSU oil, 1,000 feet per minute of air, a 50° F initial temperature difference, and a 10 psi pressure drop.
Mounting kits (sold separately) are required for installation.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cooling Cap., Btu/hr. | Pipe Size | Thread Type | Gender | Ht. | Wd. | Dp. | Heat Sink Material | Max. Pressure, psi | Max. Flow Rate, gpm | Max. Temp., °F | No. of Mount. Kits Required | Each | |
Copper Tube—For Use with Oil | |||||||||||||
| 3,300 | 1/2 | NPT | Female | 4 1/2" | 15" | 1 1/2" | Aluminum | 300 | 7 | 350° | 2 | 0000000 | 0000000 |
| 6,100 | 1/2 | NPT | Female | 6 1/2" | 18" | 1 1/2" | Aluminum | 300 | 9 | 350° | 4 | 0000000 | 000000 |
| 8,100 | 1/2 | NPT | Female | 6 1/2" | 24" | 1 1/2" | Aluminum | 300 | 7 | 350° | 4 | 0000000 | 000000 |
| 9,600 | 1/2 | NPT | Female | 8 1/2" | 21" | 1 1/2" | Aluminum | 300 | 11 | 350° | 4 | 0000000 | 000000 |
| 11,800 | 3/4 | NPT | Female | 12 3/4" | 18" | 1 1/2" | Aluminum | 300 | 19 | 350° | 4 | 0000000 | 000000 |
| 24,000 | 3/4 | NPT | Female | 18 3/4" | 24" | 1 1/2" | Aluminum | 300 | 22 | 350° | 6 | 0000000 | 000000 |
| 31,000 | 1 | NPT | Female | 25" | 24" | 1 1/2" | Aluminum | 300 | 28 | 350° | 8 | 0000000 | 000000 |
| 49,000 | 1 | NPT | Female | 31" | 30" | 1 1/2" | Aluminum | 300 | 30 | 350° | 8 | 0000000 | 000000 |
| 57,000 | 1 1/4 | NPT | Female | 37 7/16" | 30" | 1 1/2" | Aluminum | 300 | 36 | 350° | 8 | 0000000 | 00000000 |
| Includes | Each | |
| Two Carriage Bolts, Two Flat Washers, Two Lock Washers, Two Nuts, Two Rubber Blocks | 0000000 | 000000 |
Heat Exchangers
Also known as shell and tube heat exchangers, these transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. They’re commonly used in refrigeration and engine cooling systems. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference.
Heat exchangers with a 316 stainless steel shell and tubes are the most corrosion resistant.
Heat exchangers with baffled tubes direct liquid to make four passes through the tubes for more efficient heat transfer than other heat exchangers.
ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.
For technical drawings and 3-D models, click on a part number.
Shell-Side | Tube-Side | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | No. of Passes | Min. Temp., °F | Max. Temp., °F | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
Brass Shell and Baffled Copper Tube | ||||||||||||||
| 130,000 | 2.4 | 4 | -20° | 300° | 1 | 24 | 300 | 3/4 | 12 | 150 | 10 7/8" | 4 3/16" | 00000000 | 0000000 |
| 195,000 | 4.3 | 4 | -20° | 300° | 1 | 24 | 300 | 3/4 | 12 | 150 | 16 7/8" | 4 3/16" | 00000000 | 00000000 |
| 280,000 | 7.4 | 4 | -20° | 300° | 1 | 24 | 300 | 3/4 | 12 | 150 | 26 7/8" | 4 3/16" | 00000000 | 00000000 |
| 350,000 | 9.1 | 4 | -20° | 300° | 1 1/2 | 60 | 300 | 1 | 30 | 150 | 18 1/8" | 6 1/2" | 00000000 | 00000000 |
| 560,000 | 15.7 | 4 | -20° | 300° | 1 1/2 | 60 | 300 | 1 | 30 | 150 | 28 1/8" | 6 1/2" | 00000000 | 00000000 |
| 890,000 | 23 | 4 | -20° | 300° | 2 | 73 | 300 | 1 1/2 | 57 | 150 | 29" | 7 1/2" | 00000000 | 00000000 |
| 1,115,000 | 34 | 4 | -20° | 300° | 2 | 73 | 300 | 1 1/2 | 57 | 150 | 41" | 7 1/2" | 00000000 | 00000000 |
| 1,585,000 | 41 | 4 | -20° | 300° | 3 | 140 | 300 | 2 | 104 | 150 | 30 3/8" | 9 3/4" | 00000000 | 00000000 |
| 2,000,000 | 62 | 4 | -20° | 300° | 3 | 140 | 300 | 2 | 105 | 150 | 42 3/8" | 9 3/4" | 00000000 | 00000000 |
Steel Shell and Baffled Copper Tube | ||||||||||||||
| 195,000 | 4.3 | 4 | -20° | 300° | 1 | 22 | 300 | 3/4 | 12 | 150 | 17" | 4 1/2" | 0000000 | 00000000 |
| 280,000 | 7.4 | 4 | -20° | 300° | 1 | 30 | 300 | 3/4 | 12 | 150 | 27" | 4 1/2" | 0000000 | 00000000 |
| 350,000 | 9.1 | 4 | -20° | 300° | 1 1/2 | 32 | 300 | 1 | 30 | 150 | 18 11/16" | 6 3/4" | 0000000 | 00000000 |
| 560,000 | 15.7 | 4 | -20° | 300° | 1 1/2 | 43 | 300 | 1 | 30 | 150 | 28 11/16" | 6 3/4" | 0000000 | 00000000 |
| 890,000 | 23 | 4 | -20° | 300° | 2 | 51 | 300 | 1 1/2 | 57 | 150 | 29" | 7 3/4" | 0000000 | 00000000 |
| 1,115,000 | 34 | 4 | -20° | 300° | 2 | 103 | 300 | 1 1/2 | 57 | 150 | 41" | 7 3/4" | 0000000 | 00000000 |
| 1,585,000 | 41 | 4 | -20° | 300° | 3 | 103 | 300 | 2 | 104 | 150 | 30 1/2" | 10 1/2" | 0000000 | 00000000 |
| 2,000,000 | 62 | 4 | -20° | 300° | 3 | 103 | 300 | 2 | 105 | 150 | 42 1/2" | 10 1/2" | 0000000 | 00000000 |
Steel Shell and Copper Tube | ||||||||||||||
| Not Rated | 15 | 2 | Not Rated | 400° | 2 1/2 (Inlet); 1 1/4 (Outlet) | 38 | 100 | 1 1/4 | 38 | 100 | 28 5/8" | 6" | 0000000 | 00000000 |
316 Stainless Steel Shell and Baffled 316 Stainless Steel Tube | ||||||||||||||
| 130,000 | 2.4 | 4 | -20° | 450° | 1 | 32 | 225 | 3/4 | 12 | 150 | 10 3/8" | 4 3/16" | 00000000 | 00000000 |
| 195,000 | 4.3 | 4 | -20° | 450° | 1 | 32 | 225 | 3/4 | 12 | 150 | 16 3/8" | 4 3/16" | 00000000 | 00000000 |
| 280,000 | 7.4 | 4 | -20° | 450° | 1 | 32 | 225 | 3/4 | 12 | 150 | 26 3/8" | 4 3/16" | 00000000 | 00000000 |
| 350,000 | 9.1 | 4 | -20° | 450° | 1 1/2 | 76 | 225 | 1 | 30 | 150 | 17 13/16" | 6 1/2" | 00000000 | 00000000 |
| 560,000 | 15.7 | 4 | -20° | 450° | 1 1/2 | 76 | 225 | 1 | 30 | 150 | 27 13/16" | 6 1/2" | 00000000 | 00000000 |
| 890,000 | 23 | 4 | -20° | 450° | 2 | 126 | 225 | 1 1/2 | 57 | 150 | 28 1/8" | 7 1/2" | 00000000 | 00000000 |
| 1,115,000 | 34 | 4 | -20° | 450° | 2 | 126 | 225 | 1 1/2 | 57 | 150 | 40 1/8" | 7 1/2" | 00000000 | 00000000 |
| 1,585,000 | 41 | 4 | -20° | 450° | 3 | 220 | 225 | 2 | 104 | 150 | 28" | 9 3/4" | 00000000 | 00000000 |
| 2,000,000 | 62 | 4 | -20° | 450° | 3 | 220 | 225 | 2 | 105 | 150 | 40" | 9 3/4" | 00000000 | 00000000 |
Shell-Side | Tube-Side | Overall | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | No. of Passes | Min. Temp., °F | Max. Temp., °F | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
| 150,000 | 4.5 | 2 | -20° | 375° | 2 (Inlet); 1 (Outlet) | 44 | 150 | 1 1/2 | 44 | 150 | 28 1/2" | 7 1/4" | 0000000 | 000000000 |
| 420,000 | 6.8 | 2 | -20° | 375° | 2 (Inlet); 1 (Outlet) | 44 | 150 | 1 1/2 | 44 | 150 | 40 1/2" | 7 1/4" | 0000000 | 00000000 |
| 720,000 | 9.2 | 2 | -20° | 375° | 3 (Inlet); 1 (Outlet) | 44 | 150 | 1 1/2 | 44 | 150 | 52 1/2" | 7 1/4" | 0000000 | 00000000 |
| 1,350,000 | 17.4 | 2 | -20° | 375° | 2 1/2 (Inlet); 1 (Outlet) | 175 | 150 | 2 | 175 | 150 | 53 1/4" | 10 1/2" | 0000000 | 00000000 |
Shell-Side | Tube-Side | Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap. | Surface Area, sq. ft. | No. of Passes | Max. Temp., °F | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
| Not Rated | 30.2 | 2 | 400° | 4 (Inlet); 1 1/2 (Outlet) | 100 | 100 | 2 | 100 | 100 | 39 3/4" | 8 1/8" | 0000000 | 000000000 |
| Not Rated | 38.8 | 2 | 400° | 4 (Inlet); 1 1/2 (Outlet) | 100 | 100 | 2 | 100 | 100 | 51 3/4" | 8 1/8" | 0000000 | 00000000 |
| Not Rated | 72.4 | 2 | 400° | 6 (Inlet); 2 (Outlet) | 180 | 100 | 2 1/2 | 180 | 100 | 53" | 10 1/8" | 0000000 | 00000000 |
High-Efficiency Heat Exchangers
Stacked, corrugated plates maximize contact with liquid or steam flowing through these brazed plate heat exchangers for faster heat transfer than shell and tube heat exchangers. Plates are brazed in a vacuum furnace to ensure 100% sealed construction.
Copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling water from 120° to 100° F using 70° F water.
ASME BPVC VIII.1 copper-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling 100 SSU oil to 125° F using 85° F water.
Nickel-brazed heat exchangers have a Btu/hr. cooling capacity based on cooling oil from 140° to 120° F using 70° F water.
ASME BPVC VIII.1 heat exchangers meet the ASME Boiler and Pressure Vessel Code (BPVC) for construction of pressure vessels.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Hole | Mounting Stud | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | Temp. Range, °F | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Ht. | Wd. | Dp. | No. of | Dia. | No. of | Thread Size | Lg. | Each | |
Heat Exchangers | |||||||||||||||||
Copper-Brazed 316 Stainless Steel Plate | |||||||||||||||||
| 69,000 | 2.2 | -320° to 350° | 3/4 | NPT | Male | 7 | 450 | 9 1/8" | 3 1/2" | 2 5/8" | __ | __ | 2 | M8 | 20mm | 00000000 | 0000000 |
| 80,000 | 3 | -320° to 350° | 1 | NPT | Male | 8 | 450 | 13 3/16" | 5" | 1 1/4" | __ | __ | 4 | M10 | 20mm | 00000000 | 000000 |
| 185,000 | 6.8 | -320° to 350° | 1 | NPT | Male | 19 | 450 | 13 3/16" | 5" | 2" | __ | __ | 4 | M10 | 20mm | 00000000 | 000000 |
| 390,000 | 14.3 | -320° to 350° | 1 | NPT | Male | 40 | 450 | 13 3/16" | 5" | 4" | __ | __ | 4 | M10 | 20mm | 00000000 | 000000 |
| 570,000 | 21.9 | -320° to 350° | 1 1/4 | NPT | Male | 58 | 450 | 13 3/16" | 5" | 5 3/4" | __ | __ | 4 | M10 | 20mm | 00000000 | 00000000 |
| 998,000 | 36.8 | -320° to 350° | 2 | NPT | Male | 105 | 300 | 20 5/16" | 9 13/16" | 3.06" | __ | __ | 4 | 1/2"-13 | 1 1/2" | 00000000 | 00000000 |
| 1,710,000 | 63 | -320° to 350° | 2 | NPT | Male | 170 | 300 | 20 5/16" | 9 13/16" | 4.86" | __ | __ | 4 | 1/2"-13 | 1 1/2" | 00000000 | 00000000 |
Nickel-Brazed 316 Stainless Steel Plate | |||||||||||||||||
| 16,000 | 3.1 | -320° to 390° | 1 | NPT | Male | 4 | 360 | 13 3/16" | 4 7/8" | 2 3/16" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 37,000 | 6.8 | -320° to 390° | 1 | NPT | Male | 9 | 360 | 13 3/16" | 4 7/8" | 3 1/16" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 56,000 | 10.6 | -320° to 390° | 1 | NPT | Male | 13 | 360 | 13 3/16" | 4 7/8" | 4" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 74,000 | 14.3 | -320° to 390° | 1 | NPT | Male | 18 | 360 | 13 3/16" | 4 7/8" | 4 7/8" | __ | __ | 4 | M8 × 1.25 mm | 13/16" | 0000000 | 00000000 |
| 120,000 | 40.7 | -320° to 390° | 2 | NPT | Male | 30 | 390 | 20 15/16" | 10 11/16" | 4 1/16" | __ | __ | 4 | M12 × 1.75 mm | 1 13/16" | 0000000 | 00000000 |
ASME BPVC.VIII.1 Heat Exchangers | |||||||||||||||||
Copper-Brazed 316 Stainless Steel Plate | |||||||||||||||||
| 5,000 | 4.8 | -310° to 450° | 3/4 | NPT | Male | 27 | 435 | 8 7/16" | 3 3/16" | 4 7/16" | 2 | 9/32" | __ | __ | __ | 0000000 | 000000 |
| 12,000 | 7.9 | -310° to 450° | 1 | NPT | Male | 29 | 435 | 12 3/16" | 4 3/8" | 4 1/4" | 2 | 13/32" | __ | __ | __ | 0000000 | 000000 |
| 17,000 | 10.7 | -310° to 450° | 1 | NPT | Male | 37 | 435 | 12 3/16" | 4 3/8" | 5 1/4" | 2 | 13/32" | __ | __ | __ | 0000000 | 000000 |
| 50,000 | 15.6 | -310° to 450° | 1 | NPT | Male | 22 | 435 | 20 11/16" | 4 3/8" | 4 1/4" | 2 | 13/32" | __ | __ | __ | 0000000 | 000000 |
| 75,000 | 26.8 | -310° to 450° | 1 | NPT | Male | 34 | 435 | 20 11/16" | 4 3/8" | 6 3/16" | 2 | 13/32" | __ | __ | __ | 0000000 | 00000000 |
| 125,000 | 29.7 | -310° to 450° | 2 | NPT | Male | 57 | 435 | 24 5/16" | 7 1/2" | 5 3/4" | 2 | 1/2" | __ | __ | __ | 0000000 | 00000000 |
| 380,000 | 82.8 | -310° to 450° | 2 | NPT | Male | 141 | 435 | 24 5/16" | 7 1/2" | 11 1/2" | 2 | 1/2" | __ | __ | __ | 0000000 | 00000000 |
Heat Exchangers for Sampling
Surface
Area
Surface
Area
Often used to monitor boiler water quality without shutting down the system, these heat exchangers cool hot liquid samples to safe temperatures for testing. Sample liquid flows through the tubes, and cold water from an external water supply flows around the tubes to cool the liquid in the tubes.
316 stainless steel tubes have the best corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Shell-Side | Tube-Side | Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Surface Area, sq. ft. | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Max. Temp., °F | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Max. Temp., °F | Lg. | Head Dia. | Each | |
Steel Shell and Copper Tube | ||||||||||||||||
| 1.3 | 1/4 | NPT | Female | 2 | 150 | 450° | 1/4 | NPT | Female | 4 | 300 | 400° | 17 1/4" | 3 1/2" | 0000000 | 0000000 |
Steel Shell and 316 Stainless Steel Tube | ||||||||||||||||
| 1.3 | 1/4 | NPT | Female | 2 | 150 | 450° | 1/4 | NPT | Female | 4 | 1,200 | 750° | 17 1/4" | 3 1/2" | 0000000 | 000000 |
| 3.8 | 3/8 | NPT | Female | 2 | 150 | 450° | 1/4 | NPT | Female | 4 | 4,900 | 750° | 32 5/8" | __ | 0000000 | 00000000 |
High-Pressure Heat Exchangers
With more than three times the pressure rating of standard heat exchangers, these are often used for high-pressure condensing, evaporating, heating, and cooling. Also known as shell and tube heat exchangers, they transfer heat using liquid or steam that flows through the shell to heat or cool liquid in the tubes. Btu/hr. cooling capacity is based on cooling 180° F process water with 85° F water and a 10 psi pressure difference. Shell and tubes are 316 stainless steel for excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Shell-Side | Tube-Side | Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Heating/Cooling Cap., Btu/hr. | Surface Area, sq. ft. | Max. Pressure for Steam, psi | Temp. Range, °F | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Pipe Size | Thread Type | Gender | Flow Cap., gpm | Max. Pressure, psi | Lg. | Head Dia. | Each | |
316 Stainless Steel Shell and 316 Stainless Steel Tube | |||||||||||||||||
| 59,000 | 0.4 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.8 | 1,000 | 3/8 | NPT | Female | 10.9 | 1,500 | 9 3/4" | 1 1/8" | 0000000 | 000000000 |
| 65,500 | 0.61 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.4 | 1,000 | 3/8 | NPT | Female | 9.3 | 1,500 | 13 3/4" | 1 1/8" | 0000000 | 00000000 |
| 76,500 | 0.58 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.8 | 1,000 | 3/8 | NPT | Female | 10.1 | 1,500 | 9 3/4" | 1 1/8" | 0000000 | 00000000 |
| 90,000 | 0.89 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.4 | 1,000 | 3/8 | NPT | Female | 8.4 | 1,500 | 13 3/4" | 1 1/8" | 0000000 | 00000000 |
| 98,000 | 1.19 | 125 | -320° to 800° | 1/4 | NPT | Female | 4.2 | 1,000 | 3/8 | NPT | Female | 7.3 | 1,500 | 17 3/4" | 1 1/8" | 0000000 | 00000000 |