Pull the trigger on these oilers for easier one-hand operation than standard hand-held oil dispensers.

A needle dispensing tip provides fine control for lubricating small parts.

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Serve multiple lubrication points from a single location.

A solenoid automatically starts and stops flow to dispense lubricant while equipment is running.

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.

Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.

A solenoid automatically starts and stops flow to a single lubrication point to dispense lubricant while equipment is running.

Use these brushes to lubricate chain, gears, and conveyors. Connect to an oil dispenser, then turn the dial to adjust flow.

Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.

Connect these modular pumps to a reservoir and a solenoid valve to automate the flow of oil.

Choose from pumps that dispense with a set interval. Turn the dial to adjust the flow from 0.1 oz. to 0.2 oz. per cycle.

Dispense a fixed amount of oil by pumping the handle.

These manual dispensers are more portable than air-powered dispensers.

Measure oil as it's dispensed.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

This hose is made of steel.

These dispensers have a reservoir and controls for coolant flow.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

Draw coolant from your existing tank.

These nozzles handle coolant pressure up to 150 psi.

These nozzles handle coolant pressure up to 150 psi.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

Dispense small amounts of grease with this compact gun.

Deliver small amounts of grease with only a light push against the lubrication point.

Turn a small tube of grease into a dispenser.

Because of their one-hand operation, pistol-grip grease guns are easier to use for adding grease to hard-to-reach places than lever-grip guns.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Dispense from grease guns into grease fittings and bare lubrication points.

These rigid tip adapters penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Dispense from grease guns into grease fittings and bare lubrication points.

With threads on both ends, these rigid nozzles connect grease guns to dispensing tips.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

These flexible extensions have a quick-disconnect fitting that snaps into your dispensing tip, so you can lubricate grease fittings that are hard to reach.

Convert dispensing tips with male threads into quick-disconnect couplings.

Mount these pumps to your grease container to bulk load guns.

Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease.

Spring pressure ensures a constant flow of grease.

These dispensers come packed with grease, eliminating the mess of filling. Turn the dial to adjust flow rate.

Lubricate single- and double-strand roller chain.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

A display allows you to monitor how much grease is dispensed.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispense grease using compressed air.

Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids.

Fill air-atomizing sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.

Dispense flammable liquids with these FM-approved push-top dispensers.

An additive prevents electrostatic discharge from building up on the surface of these dispensers.

Squeeze the ball to create pressure, then push down on the dispenser to dispense flammable liquids into vials, test tubes, and other small containers. Only a PTFE tube and stainless steel pump come into contact with the liquid.

The open top makes these easier to fill than jugs, while the spout gives more control when pouring.

A self-closing faucet provides controlled, one-handed dispensing of liquids.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring.

For low-effort dispensing, these pumps have a lever handle that maximizes output with each stroke. Use them to pump lubricating oil, such as motor oil.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

All of these pumps have bonding and grounding wires, while some also have an internal flame arrester, to pump fuel, cleaning solvents, and lacquer thinners.

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Push the plunger to pump water, cleaners, and chemicals.

Rotate the handle to dispense a continuous flow of liquid.

These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Transfer lubricating oil such as hydraulic and motor oil with these pumps. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids.

Use these pumps with fuel and flammable liquids, such as acetone, ethanol, and gasoline. They handle nearly twice the amount of pressure as other air-powered drum pumps to move high-viscosity liquids.

Often used with ammonia, etching and cleaning solutions, and other caustics, these pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.