These are the most commonly used pressure gauges. Use them with pumps, filters, regulators, and in process lines to measure and display pressure.

The small dial on these gauges allows for installation in tight spaces.

A digital display allows for easy reading of measurements.

Gauges come in a variety of colors so you can identify an important spot in your process line.

A liquid-filled dial reduces needle flutter for precise readings in high-vibration applications.

Unlike other gauges that have multiple moving parts that can shake loose, these have only one internal part. They are the most shock-resistant gauges we offer.

These gauges can withstand both extremely cold and extremely hot temperatures.

Gauges have an accuracy of ± 0.5% to ± 1%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.

Gauges have an accuracy of ± 1% to ± 1.5%. They are suitable for critical processes that require high accuracy, such as hydraulic and laboratory applications.

Use in low-pressure applications up to 160 psi.

Use in high-pressure applications up to 3,000 psi.

Remotely monitor pressure in general purpose applications such as pumping and compressing systems.

For use in sanitary applications such as food processing, these transmitters are 3-A certified.

FM approved and CSA certified for use in hazardous locations, these transmitters monitor pressure where combustible fumes may be present.

These transmitters automatically compensate for error introduced by vibration as well as temperature fluctuations, so you do not need to program your receiving device to correct for these factors. They convert pressure to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.

Safely monitor liquid, gas, and steam pressure in hazardous locations with these transmitters. They meet NEC safety standards, so they protect against an explosion where flammable gases and vapors are present.

Monitor and control pressure in portable HVAC systems, hydraulics, and oil and gas equipment. Unlike other pressure transmitters that measure the difference between your system and the atmosphere, these transmitters give measurements relative to zero pressure—regardless of altitude or temperature.

Measure the difference in pressure between two points in flow applications, such as heating, cooling, and pumping systems.

Monitor and control vacuum pumps, air compressors, and hydraulics while viewing readings and warnings on the display.

Used in hazardous locations, these transmitters safely convert pressure and vacuum into an electrical signal to measure liquids, gases, and steam. NEC rated for safety, these transmitters are explosion proof, so they can be used in environments containing flammable gases and vapors.

These transmitters automatically compensate for error introduced into both pressure and vacuum measurements by vibrations as well as temperature fluctuations, so you do not need to program corrections for these factors into your receiving device. They convert pressure and vacuum to an electrical signal that can be interpreted by receiving devices, such as remote displays, programmable logic controllers, and motor speed controls to monitor pressure or control equipment.