Shape Shape |
---|
![]() | ![]() |
Rod and Disc | Straight |
![]() | |
90° Elbow |
Density Density |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Overall Height Overall Height |
---|
About Oil Fittings and Oil Cups
More
About Selecting Wool Felt
More
Firm Felt Cords

This firm felt provides wear resistance when used for polishing, wicking, cushioning, wiping, and gasketing.
The higher the wool fiber content, the better the vibration absorption and abrasion resistance.
For technical drawings and 3-D models, click on a part number.
Dia. | Wool Fiber Content | Density, lbs./sq. yd. | Hardness | Pressure to Compress 10%, psi | Temperature Range, °F | Color | Tensile Strength, psi | Lengths, ft. | Per Ft. | |
F1 | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
1/8" | 95% | 2.00 | Durometer 35A | 21 | -80° to 200° | White | 500 | 0000000 | 00000 | |
3/16" | 95% | 3.00 | Durometer 35A | 21 | -80° to 200° | White | 500 | 0000000 | 0000 | |
1/4" | 95% | 4.00 | Durometer 35A | 21 | -80° to 200° | White | 500 | 0000000 | 0000 | |
3/8" | 95% | 6.00 | Durometer 35A | 21 | -80° to 200° | White | 500 | 0000000 | 0000 | |
1/2" | 95% | 8.00 | Durometer 35A | 21 | -80° to 200° | White | 500 | 0000000 | 0000 | |
F3 | ||||||||||
1/8" | 85% | 1.95 | Durometer 35A | 13 | -80° to 200° | Gray | 400 | 000000 | 0000 | |
3/16" | 85% | 2.93 | Durometer 35A | 13 | -80° to 200° | Gray | 400 | 000000 | 0000 | |
1/4" | 85% | 3.90 | Durometer 35A | 13 | -80° to 200° | Gray | 400 | 000000 | 0000 | |
3/8" | 85% | 5.85 | Durometer 35A | 13 | -80° to 200° | Gray | 400 | 000000 | 0000 | |
1/2" | 85% | 7.80 | Durometer 35A | 13 | -80° to 200° | Gray | 400 | 000000 | 0000 |
Oil Cups
A built-in reservoir allows oil to gradually pass through to equipment, reducing time spent on manual lubrication. Flow rate depends on temperature.
Use 90° elbow cups for side-mount applications and where vertical space is limited.
Oil cups with wick feed have a wick that extends through the threaded connection of the cup and keeps the bearing dust-free and lubricated, even after the oil cup is drained.
For technical drawings and 3-D models, click on a part number.


Each | ||||||||
---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Overall Ht. | Installation Clearance | Thread Lg. | Bowl Material | Pressure Regulation | 1-9 | 10-Up | |
1/8 NPT Male Outlet | ||||||||
1/16 | 1 1/2" | 1 7/32" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
1/8 | 1 21/32" | 1 7/16" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
5/16 | 1 29/32" | 1 13/16" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/4 NPT Male Outlet | ||||||||
5/16 | 2" | 1 13/16" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
3/8 NPT Male Outlet | ||||||||
1 5/16 | 2 9/16" | 2 7/16" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |


Each | ||||||||
---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Overall Ht. | Installation Clearance | Thread Lg. | Bowl Material | Pressure Regulation | 1-9 | 10-Up | |
1/8 NPT Male Outlet | ||||||||
1/16 | 2" | 1 7/32" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
1/8 | 2 5/32" | 1 7/16" | 11/32" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
5/8 | 2 13/32" | 2" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/4 NPT Male Outlet | ||||||||
5/8 | 2 15/32" | 2" | 3/8" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |


Overall | Each | ||||||||
---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Ht. | Wd. | Installation Clearance | Thread Lg. | Bowl Material | Pressure Regulation | 1-9 | 10-Up | |
1/8 NPT Male Outlet | |||||||||
1/8 | 15/16" | 1 11/32" | 1 19/32" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
1/2 | 1 7/16" | 1 11/16" | 2 5/8" | 5/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/4 NPT Male Outlet | |||||||||
1/2 | 1 7/16" | 1 15/16" | 2 1/2" | 7/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
3/8 NPT Male Outlet | |||||||||
1 7/8 | 2 1/16" | 2 13/32" | 4" | 7/16" | Zinc-Plated Steel | Nonvented | 0000000 | 00000 | 00000 |
1/2 NPT Male Outlet | |||||||||
3 3/4 | 2 1/16" | 3 1/2" | 4" | 9/16" | Zinc-Plated Steel | Nonvented | 0000000 | 000000 | 000000 |
Grease Cups

Fill the cover with grease and then screw it onto the bowl. As you tighten the cover, grease is squeezed out of the bowl and into your joint, bearing, or equipment.
Grease Outlet | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cap., fl. oz. | Bowl Dia. | Overall Ht. | Thread Type | Pipe Size | Gender | Bowl Material | Temp. Range, °F | Each | |
3/64 | 5/8" | 1 1/4" | NPT | 1/8 | Male | Zinc-Plated Brass | -40° to 355° | 0000000 | 000000 |
Oil Fittings for Unthreaded Holes
Drive these fittings into unthreaded holes.
Zinc and zinc-plated steel fittings have mild corrosion resistance. Nickel-plated steel fittings are more corrosion resistant than zinc and zinc-plated steel fittings.
Fittings with a self-closing hinged cover block contaminants from entering equipment.
Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.
For technical drawings and 3-D models, click on a part number.


Each | |||||||
---|---|---|---|---|---|---|---|
For Hole Dia. | Material | Shank Lg. | Overall Ht. | Installation Clearance | 1-9 | 10-Up | |
3/16" | Zinc-Plated Steel | 7/32" | 15/32" | 3/4" | 0000000 | 00000 | 00000 |
1/4" | Zinc-Plated Steel | 5/32" | 13/32" | 11/16" | 000000 | 0000 | 0000 |
1/4" | Zinc-Plated Steel | 1/4" | 7/16" | 3/4" | 0000000 | 0000 | 0000 |
5/16" | Zinc-Plated Steel | 7/32" | 1/2" | 3/4" | 000000 | 00000 | 00000 |
3/8" | Zinc-Plated Steel | 7/32" | 17/32" | 25/32" | 000000 | 00000 | 00000 |
7/16" | Zinc-Plated Steel | 5/16" | 11/16" | 29/32" | 000000 | 00000 | 00000 |
1/2" | Zinc-Plated Steel | 3/8" | 13/16" | 1 7/32" | 0000000 | 00000 | 00000 |
3/4" | Zinc-Plated Steel | 9/16" | 1 3/16" | 1 13/16" | 0000000 | 00000 | 00000 |
7/8" | Zinc-Plated Steel | 1/2" | 1 1/16" | 1 13/16" | 0000000 | 00000 | 00000 |
1" | Zinc-Plated Steel | 19/32" | 1 5/16" | 2 3/32" | 0000000 | 00000 | 00000 |
1 1/4" | Zinc-Plated Steel | 13/16" | 1 11/16" | 2 7/16" | 0000000 | 00000 | 00000 |
6mm | Nickel-Plated Steel | 6mm | 12mm | 16mm | 0000000 | 0000 | 0000 |
7mm | Nickel-Plated Steel | 6mm | 14mm | 19mm | 0000000 | 0000 | 0000 |
Oil Fittings
Zinc and zinc-plated steel fittings have mild corrosion resistance. Zinc-plated brass fittings have good corrosion resistance. Nickel-plated brass fittings are more corrosion resistant than zinc-plated brass fittings.
Fitting with a check valve prevents oil from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants. Fittings with a self-closing hinged cover block contaminants from entering equipment.
UNF and UNEF threads are similar to threads on a machine screw or bolt. They require a sealant, such as an O-ring, to minimize leakage.
Note: Fittings do not hold oil; any oil dispensed into the fittings passes into the part to be lubricated.


Each | |||||||
---|---|---|---|---|---|---|---|
Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/4"-32 Male UNEF Threads | |||||||
Zinc-Plated Brass | 7/16" | 7/32" | 7/32" | 3/8" | 000000 | 000000 | 000000 |



Each | |||||||
---|---|---|---|---|---|---|---|
Material | Overall Ht. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/8 Male NPT Threads | |||||||
Zinc-Plated Steel | 13/16" | 1/4" | 1/4" | 13/16" | 0000000 | 000000 | 000000 |
Zinc-Plated Steel | 7/8" | 9/32" | 9/32" | 29/32" | 0000000 | 00000 | 00000 |
Zinc-Plated Steel | 1 5/32" | 13/32" | 13/32" | 1 7/32" | 0000000 | 00000 | 00000 |
1/4 Male NPT Threads | |||||||
Zinc-Plated Steel | 1 5/32" | 13/32" | 13/32" | 1 7/32" | 0000000 | 00000 | 00000 |
3/8 Male NPT Threads | |||||||
Zinc-Plated Steel | 1 9/32" | 3/8" | 3/8" | 1 7/32" | 0000000 | 00000 | 00000 |
1/2 Male NPT Threads | |||||||
Zinc-Plated Steel | 1 7/16" | 9/16" | 9/16" | 1 7/16" | 0000000 | 00000 | 00000 |
10-32 Male UNF Threads | |||||||
Zinc-Plated Steel | 9/16" | 3/16" | 3/16" | 3/4" | 0000000 | 00000 | 00000 |
1/4"-32 Male UNEF Threads | |||||||
Zinc-Plated Steel | 9/16" | 5/32" | 5/32" | 11/16" | 0000000 | 00000 | 00000 |
Zinc-Plated Steel | 9/16" | 3/16" | 3/16" | 3/4" | 0000000 | 00000 | 00000 |
Zinc-Plated Steel | 3/4" | 1/4" | 1/4" | 3/4" | 0000000 | 00000 | 00000 |
5/16"-32 Male UNEF Threads | |||||||
Zinc-Plated Steel | 27/32" | 1/4" | 1/4" | 13/16" | 0000000 | 00000 | 00000 |
M5 × 0.8 mm Male Metric Threads | |||||||
Nickel-Plated Brass | 15mm | 4mm | 4mm | 16mm | 0000000 | 00000 | 00000 |
M6 × 1 mm Male Metric Threads | |||||||
Nickel-Plated Brass | 15mm | 5mm | 5mm | 19mm | 0000000 | 00000 | 00000 |
M8 × 1.25 mm Male Metric Threads | |||||||
Nickel-Plated Brass | 16.5mm | 5mm | 5mm | 19mm | 0000000 | 00000 | 00000 |
1/4 Female NPT Threads | |||||||
Zinc-Plated Steel | 1" | 7/16" | 7/16" | 1 7/16" | 0000000 | 00000 | 00000 |
1 Female NPT Threads | |||||||
Zinc-Plated Steel | 1 9/16" | 3/4" | 3/4" | 2 9/32" | 0000000 | 00000 | 00000 |


Each | ||||||||
---|---|---|---|---|---|---|---|---|
Material | Overall Ht. | Overall Wd. | Shank Lg. | Thread Lg. | Installation Clearance | 1-9 | 10-Up | |
1/8 Male NPT Threads | ||||||||
Zinc | 25/32" | 1 3/32" | 1/4" | 1/4" | 1 5/16" | 0000000 | 000000 | 000000 |
10-32 Male UNF Threads | ||||||||
Zinc | 19/32" | 3/4" | 5/32" | 5/32" | 1 1/16" | 0000000 | 00000 | 00000 |
1/4"-32 Male UNEF Threads | ||||||||
Zinc | 19/32" | 3/4" | 3/16" | 3/16" | 1 1/16" | 0000000 | 00000 | 00000 |
5/16"-32 Male UNEF Threads | ||||||||
Zinc | 25/32" | 1 3/32" | 3/16" | 3/16" | 1 5/16" | 0000000 | 00000 | 00000 |