Container Type Container Type |
|---|
 |  |
| Aerosol Can | Can |
 |  |
| Grease Gun Cartridge | Jar |
 | |
| Tube |
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Compatible With Compatible With |
|---|
|
|
Lubricant Type Lubricant Type |
|---|
|
Trade Name Trade Name |
|---|
|
Manufacturer Manufacturer |
|---|
|
Base Oil Base Oil |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Specifications Met Specifications Met |
|---|
|
Environment Environment |
|---|
|
About Lubricants
More
About Grease
More
Chuck Grease
Designed to remain in place during machining applications, this grease stands up to high rotational speeds, high pressure, and coolant.
NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter. NLGI 3 is about the consistency of vegetable shortening.
Grease with barium thickener has good heat resistance and excellent moisture resistance. Grease with clay thickener has excellent heat resistance and good oxidation resistance.
Grease with zinc neutralizes acid and is a good replacement for leaded grease. Grease with sulfur has excellent resistance to wear and can withstand high-load and high-pressure applications.
Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.
Container | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz | Type | Temp. Range, °F | Melting Temp., °F | Color | Each | |
Barium Thickener | |||||||||
| 2-3 | Mineral | Zinc | 2.8 | Tube | 5° to 300° | 350° | White | 0000000 | 000000 |
Clay Thickener | |||||||||
| 2 | Semisynthetic | Sulfur | 14 | Grease Gun Cartridge | -40° to 350° | 570° | Amber | 0000000 | 00000 |
Container | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| NLGI Viscosity Grade | Base Oil | Additive | Size, oz | Type | Temp. Range, °F | Melting Temp., °F | Color | Pkg. Qty. | Pkg. | |
Clay Thickener | ||||||||||
| 2 | Semisynthetic | Sulfur | 14 | Grease Gun Cartridge | -40° to 350° | 570° | Amber | 10 | 0000000 | 0000000 |
Assembly Lubricants
Coat tight-fitting metal parts, such as gears, clutches, and press-fit assemblies, with these lubricants before sliding them together to make assembly easier. Once assembled, they provide initial lubrication in equipment before oil has a chance to flow.
Mineral-oil-based lubricants, derived from petroleum, are more economical than synthetic-oil-based lubricants. Synthetic-oil-based lubricants last longer than mineral-oil-based lubricants.
Lubricants with moly (molybdenum disulfide) withstand high-pressure applications and have excellent wear resistance. Lubricants with graphite have additional pressure resistance and excellent temperature resistance. All Dupont Molykote lubricants have a high load-carrying capacity. Molykote M-77 Paste is commonly used on brakes and clutches; it is compatible with material that is damaged by mineral oil, such as natural rubber, SBR, and EPDM. As a paste it lubricates to 445° F; after drying, it continues to lubricate at temperatures up to 660° F. Molykote G-Rapid Plus Paste is often used to assemble threaded spindles, gears, screws, and pumps. It can be used as an initial lubricant. Molykote DX Paste has good corrosion resistance. It provides long-lasting lubrication after assembly.
Container | Each | Package | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Additive | Temp. Range, °F | Compatible With | Each | Pkg. Qty. | Pkg. | ||
Mineral Base Oil | |||||||||
DuPont Molykote G-Rapid Plus Paste | |||||||||
| 8.8 oz. | Jar | Graphite, Moly | -30° to 840° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 | 10 | 000000 | 0000000 |
DuPont Molykote G-Rapid Plus Spray | |||||||||
| 13.5 oz. | Aerosol Can | Graphite, Moly | -30° to 750° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 00000 | 12 | 000000 | 000000 |
DuPont Molykote DX Paste | |||||||||
| 2.2 lbs. | Can | __ | -15° to 255° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 | __ | 000000 | 00 |
Synthetic Base Oil | |||||||||
DuPont Molykote M-77 Paste | |||||||||
| 33.3 oz. | Jar | Moly | -50° to 750° | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 | 12 | 000000 | 00000000 |
Food Industry Assembly Lubricants
For use in food-processing and preparation areas, these lubricants are rated for incidental food contact. Coat tight-fitting parts with them before sliding together to make assembly easier.
Mineral-oil-based lubricants have a high load-carrying capacity and can lubricate sliding loads at low-to-medium speeds.
Container | Each | |||||
|---|---|---|---|---|---|---|
| Size | Type | Temp. Range, °F | Specifications Met | Compatible With | Each | |
DuPont Molykote P-1900 Anti-Seize Paste—Mineral Base Oil | ||||||
| 1 lbs. | Can | -20° to 570° | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | Aluminum, Brass, Carbide, Cast Iron, Copper, Fiberglass, Glass, Iron, Nickel, Plastic, Rubber, Stainless Steel, Steel, Titanium | 000000 | 000000 |