Protect chain and other moving metal parts found in food-processing and preparation equipment while limiting environmental impact. These lubricants are NSF registered H1 for incidental food contact and are considered Environmentally Acceptable Lubricants (EAL) by the EPA’s Vessel General Permit. To qualify as an EAL, a lubricant must be able to quickly break down in water. Use them to cut through dirt, grease, and rust, and to protect metal surfaces.

For use with roller chain and other moving metal parts, these thin lubricants cut through dirt, grease, and rust, withstand heavy loads, and resist wear.

Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. Lubricants with PTFE provide long-lasting lubrication.

Lubricants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).

By traveling along individual strands and penetrating to the core of wire rope and cable, these lubricants maximize coverage to prevent rust and reduce wear. They cut through dirt, grease, and rust to protect wire rope and cable.

Lubricants with moly (molybdenum disulfide) withstand high loads and have excellent wear resistance. They can be applied while wire rope is in motion. Lubricants with PTFE leave no residue. They come in a pen for precision applications.

Made with moisture-resistant calcium sulfonate thickener, this grease resists washing off and reduces corrosion and oxidation in wet environments. Its zinc additive neutralizes acid and makes it a good replacement for leaded grease.

NLGI viscosity grade is a rating of a grease’s consistency. NLGI 000 is about the consistency of ketchup.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

Made with moisture-resistant calcium sulfonate thickener, this grease resists washing off and reduces corrosion in wet environments while still lubricating under heavy loads. Its zinc additive neutralizes acid and makes it a good replacement for leaded grease. Tackier than gear box grease, it sticks to open gears and roller chain.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 1 is about the consistency of tomato paste. NLGI 2.5 is between the consistencies of peanut butter and vegetable shortening.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.

For use in food-processing and preparation areas, this grease is NSF registered H1 or meets FDA Compliant 21 CFR 178.3570 for incidental contact with food. It's tacky to stick to open gears and roller chain.

NLGI viscosity grade is a rating of a grease's consistency. NLGI 2 is about the consistency of peanut butter.

Mineral-oil-based grease, derived from petroleum, is more economical than semisynthetic-oil-based grease. It has aluminum thickener, which provides excellent oxidation resistance and good moisture resistance.

Grease lubricates most efficiently within the listed temperature range. Melting temperature is the point at which grease will fail and run out of equipment, leaving it to run dry.