A needle dispensing tip provides fine control for lubricating small parts.

These dispensers have an opening for filling without removing the nozzle.

Deliver a mist of oil using shop air.

Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow.

A sealed design prevents contamination in dirty and dusty environments.

Customize these dispensers to serve up to 24 lubrication points from a single location.

Control the flow of oil to a single lubrication point.

A sealed design prevents contamination in dirty and dusty environments. Install a line between the reservoir's pressure port and the lubricated equipment to balance pressure.

Mount these directly to your machine—the cup allows oil to gradually pass through to equipment, reducing time spent on manual lubrication.

For use in clean environments, these manifolds have multiple air vents that keep pressure balanced.

Deliver an equal amount of oil to multiple lubrication points at once.

Flip the lever to start and stop flow.

Use this dispenser to brush oil on chain, gears, and conveyors. Often used to replenish lubricant after washdowns.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.

Air pressurizes the oil in the reservoir and atomizes the spray. Add a spray valve to direct the flow of oil.

Connect these modular pumps to a reservoir and a solenoid valve to automate the flow of oil.

Set the cycle interval as well as the dispensing duration. This pump has a maximum flow of 0.1 oz. per second.

Dispense a fixed amount of oil by pumping the handle.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

Deliver small amounts of grease with only a light push against the lubrication point.

Be sure you’re using the right grease—this gun has a clear barrel for identification at a glance.

Turn a small tube of grease into a dispenser.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

Dispensing more grease per pump than pistol-grip guns, lever-grip guns are better for applications that require high grease output.

Switch between high-pressure and low-pressure settings. Use high pressure to dispense thicker grease or to force grease through clogged fittings. Use low pressure for high-volume dispensing.

These guns deliver twice as much grease per stroke than standard lever-grip guns.

Designed to lubricate linear motion components, such as slide bearings, guides, and ball screws, these guns work exclusively with THK grease cartridges and fittings.

Dispense from grease guns into grease fittings and bare lubrication points.

Slide the metal sleeve up to the tip for rigidity. Slide it back down to expose the flexible nozzle.

These flexible nozzles come with a dispensing tip and have threads on one end for connecting to a grease gun.

These flexible nozzles have threads on both ends for connecting a grease gun to a dispensing tip.

Sets include dispensing tips for grease fittings and bare lubrication points.

Dispense from grease guns into grease fittings and bare lubrication points.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Lubricate standard grease fittings in hard-to-reach areas. Extensions have a quick-disconnect fitting that snaps into your dispensing tip for standard grease fittings.

Attach these nipples to guns to load grease from bulk filler pumps.

Tighten the cover to dispense grease.

Turn the metering pin to adjust flow rate.

Connect these modular pumps to your air system and add a solenoid valve to automate the flow of grease.

Lubricate single- and double-strand roller chain.

This dispenser delivers over three times more grease per stroke than our dual-output dispensers.

Connect these guns to container-mount dispensers for controlled dispensing.

Increase the pressure of your grease system when necessary to dispense thick grease and force grease through clogged fittings.

More portable than air-powered options, attach this dispenser to a battery to deliver grease on the go.

Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

Use with Loc-Line hose to assemble and disassemble components.

This hose is made of steel.

Draw coolant from your existing tank.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

Draw coolant from your existing tank.

These nozzles handle coolant pressure up to 150 psi.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

These nozzles handle coolant pressure up to 150 psi.

Choose from a variety of containers, lids, and accessories to design a dispenser that will pour or pump contents without allowing contaminants inside. These dispensers are often used with oil and other lubricating fluids.

Spray thin liquids evenly without propellant. Fill the sprayer and pressurize with compressed air.

Connect these needles to adhesive cartridges, grease guns, and other dispensers with a threaded connection.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Replace a cracked or lost sight dome on your Parker modular compressed air lubricator.

Replace a cracked or lost sight dome on your SMC modular compressed air lubricator.

Replace a damaged bowl on your Norgren modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Wilkerson modular compressed air lubricator.

Replace a damaged bowl, or change the bowl material on your Parker modular compressed air lubricator.

A Wilkerson filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

A Norgren filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ARO filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Three components are combined in the same space as a filter alone. These units provide clean, lubricated compressed air at your required pressure.

With one outlet port before the lubricator and one after, these filter/regulator/lubricators work in systems that require lubrication in some lines but not in others.