Build a custom 1/4" system to deliver coolant, cutting oil, water, or air in any direction.

Build a custom 1/2" system to deliver coolant, cutting oil, water, or air in any direction.

Kit contains lengths of hose, nozzles, connectors, and assembly pliers.

For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi.

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi.

These nozzles handle coolant pressure up to 150 psi.

Draw coolant from your existing tank.

Press the lever to stop coolant mist and start a high-velocity air stream to remove dust and shavings.

These dispensers have a reservoir for recirculating coolant.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

A lever handle maximizes output with each stroke for low-effort dispensing.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

A 316 stainless steel housing makes these pumps resistant to coolants such as ethylene glycol.

Often used with ammonia, etching and cleaning solutions, and other caustics, these pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

Designed to move 40 gallons of liquid per minute, these pumps quickly empty drum contents.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

This pump has a totally enclosed nonventilated (TENV) motor that is cooled by the liquid being pumped. Also known as a flexible impeller pump, it creates a suction force that can draw liquid upward to fill the pump chamber when your liquid source is below the pump.