Control two steps of an electrical process from a single relay—with two fully independent channels and 30 different functions, these relays give you a wide range of possibilities. Each channel has its own output, so you can run two different functions (one per circuit) at the same time. Mount them to 35 mm DIN rails (also known as DIN 3 rail) and connect them to lighting systems, conveyors, electric motors, and other systems. These relays are UL Listed, C-UL Listed, and CE Marked, meaning they meet U.S. and international safety standards.

View times, function names, and on/off status for both channels at once using the digital display. You can program these relays with a joystick on the face, which is easier to use than the rotary dials on traditional relays. You can also program them using an Android phone with NFC (near field communication) capability, which is commonly used for mobile payment. Once you select the functions you need, hold the phone against the relay to program.

Connect switches to inputs on these relays to trigger, pause, and reset functions. Turning on a switch connected to the pause input stops functions until the switch is turned off. A switch connected to the reset input will start functions from the beginning. If the relay is actively receiving a signal, the function will restart right away. If there is no signal, the function will stop and reset, so it starts from the beginning the next time it’s triggered. You can use switches to pause or reset both channels at once, or for one channel only.

Use relays with proximity sensor compatibility to activate functions when your sensor is triggered, such as when an object approaches or a liquid level changes. These relays are compatible with both standard styles of sensors, PNP and NPN, and are often used for warning signals, motion-detecting light and heating systems, and automated assembly lines.

Although these relays have 30 different functions, they all fall into 10 categories. Within these categories, you can select different functions to allow you to add a switch, program a delay, or change how the relay responds to a trigger (turning on or off, pausing, or resetting).

Manual Switch Control—Use these functions to turn the relay on and off with a switch.

Fixed On/Off—The on function keeps the relay on whenever input voltage is applied; it will only turn off if the voltage is removed. The off function keeps the relay in an off state, even if input voltage is applied.

Switch-On (Single-Shot)—These functions require a switch to activate the relay, which stays on for the programmed amount of time. For example, lights in a storage room are turned on with a switch and stay on for a set time before turning off.

Delayed Start (Delay-on-Make)—These functions allow you to set how long it takes for the relay to turn on after input voltage is applied. For example, a drill starts pumping lubricant immediately, but it does not start rotating until the set time has elapsed.

Delayed Switch-Off (Delay-on-Break)—These functions use a switch instead of input voltage. When the switch is turned off, the relay remains on for a programmed amount of time before turning off. For example, a projector’s light is turned off with a switch, but its cooling fan continues to run for a set time.

Delayed Switch-On with Delayed Switch-Off—This function uses a switch instead of an input voltage. It allows you to set how long it takes the relay to turn on after a switch is turned on, and how long it will stay on after the switch is turned off. For example, a furnace turns on, but the fan doesn’t start pushing air through the vents until it has been heated. When the furnace turns off, the fan keeps blowing to circulate all the hot air.

Interval—These functions use input voltage to turn on the relay for a programmed amount of time. For example, when a part moving down a conveyor reaches a certain location, a cleaning spray comes on for a set amount of time.

Repeat Cycle—These functions alternate between an on cycle and off cycle of equal durations until input voltage is removed, such as with a flashing light.

Asymmetrical Repeat Cycle—These functions alternate between different durations of on and off for as long as input voltage is applied. For example, a sprinkler system sprays in short bursts followed by longer rest periods, on and off until input voltage is removed.

Switch-On Asymmetrical Repeat Cycle—These functions are activated with a switch instead of input voltage. They can be used to turn on a motor or other system for a short period and then turn it off for a longer rest period, repeating that pattern until the switch is turned off.

For technical drawings and 3-D models, click on a part number.

Maximize space inside your control cabinet. The included relay socket mounts to 35 mm DIN rail; the relay disconnects from the socket for easy replacement. These relays provide a variety of timing functions in one relay.

With no moving parts, these solid state relays have an extended service life. Mount directly to 35 mm DIN rail or attach to a flat surface. They provide a variety of timing functions in one relay.

Use relays with DIP switches for more precise control than knobs; they make it easier to set multiple relays to the same timing range.

Plug relays into relay sockets for fast installation and replacement. They provide a variety of timing functions in one relay.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

Smaller than standard multifunction timer relays, these relays save space in your control cabinet. They plug into relay sockets for fast installation, and provide a variety of timing functions in one relay.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

Install relays in a panel cutout or plug into a relay socket. They provide a variety of timing functions in one relay.

Single-circuit relay has two types of delayed switch-off (delay-on-break) functions and two types of signal on/off delay functions.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

Mounting bracket (sold separately) is required to mount in a panel cutout.

With no moving parts, these solid state relays have an extended service life. Use the mounting hole to attach to a flat surface. A potentiometer (variable switch) adjusts the delay within the range.

For technical drawings and 3-D models, click on a part number.

Use the mounting hole to attach these relays to a flat surface. A potentiometer (variable switch) adjusts the delay within the range.

For technical drawings and 3-D models, click on a part number.

Plug relays into relay sockets for fast installation and replacement. Use them in applications where machinery needs to turn on or off after a set period of time, such as in paint and conveyor lines.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

For technical drawings and 3-D models, click on a part number.

Postpone starts longer and set wider intervals than with most timer relays. These relays plug into relay sockets for fast installation and replacement.

Relay socket (sold separately) mounts to 35 mm DIN rail or flat surfaces.

For technical drawings and 3-D models, click on a part number.

Mount these relays directly to 35 mm DIN rail. After selecting a timing range, use the knob to adjust the trip time within the timing range. With no moving parts, these solid state relays have an extended service life.