Output Channel Type Output Channel Type |
|---|
|
Output Type Output Type |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
|
Body Material Body Material |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Miniature Rotary Motion Position-Measuring Transmitters with Mounting Plate
Slide one of these transmitters onto a motor shaft in your application—they have a flexible mounting plate that compensates for shaft misalignment and vibration. Also known as encoders, these miniature transmitters convert rotary motion to an electrical signal that indicates distance, direction, and speed of travel. They're often used to automate servomotors, robotics, and assembly machines.
Transmitters have NPN Open Collector output that requires a pull-up resistor (not included) for operation. Output channel Z is also known as an index channel. You must use transmitters with a controller that has quadrature detection to get a 4X resolution increase. All meet IP64 for protection from dust and water spray.
Mount. Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter | Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Max. Input Current, mA | Output Current, mA | Body Material | Housing Material | Mount. Plate Wd. | Ctr.-to-Ctr. | Thread Size | Fasteners Included | Choose a Resolution | Each | |
Quadrature Output Channel | |||||||||||||||
| 1/4" | A, B, Z | 2X, 4X | 8,000 | 5V DC-28V DC | 65 | 20 | Aluminum | Plastic | 2.16" | 1.81" | 6-32 | No | 000000 | 0000000 | |
| 3/8" | A, B, Z | 2X, 4X | 8,000 | 5V DC-28V DC | 65 | 20 | Aluminum | Plastic | 2.16" | 1.81" | 6-32 | No | 000000 | 000000 | |
Miniature Rotary Motion Position-Measuring Transmitters
Often used with servomotors, these transmitters have a mounting hole pattern that fits a three-hole 28 mm BC servomotor face. Also known as encoders, these miniature transmitters convert rotary motion to an electrical signal that indicates distance, direction, and speed of travel. They're commonly used in control systems to automate servomotors, robotics, and assembly machines.
Transmitters have NPN Open Collector output that requires a pull-up resistor (not included) for operation. Output channel Z is also known as an index channel. You must use transmitters with a controller that has quadrature detection to get a 4X resolution increase. All meet IP64 for protection from dust and water spray.
Use a flexible shaft coupling (not included) to connect the transmitter shaft to a drive shaft.
Mount. Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Max. Input Current, mA | Output Current, mA | Shaft Coupling Required | Body Material | Housing Material | Shaft Material | Thread Size | Thread Pitch, mm | Fasteners Included | Choose a Resolution | Each | |
Quadrature Output Channel | |||||||||||||||
| A, B, Z | 2X, 4X | 8,000 | 5V DC-28V DC | 65 | 20 | Yes | Aluminum | Plastic | Stainless Steel | M3 | 4.57 | No | 000000 | 0000000 | |
Sanitary Rotary Motion Position-Measuring Transmitters
Also known as encoders, these sanitary transmitters convey motion to an electrical signal that conveys distance, direction, and speed. They’re often used in control systems to automate servomotors, robotics, and assembly machines in sanitary environments such as food and pharmaceutical plants. Made of corrosion-resistant stainless steel, they won’t rust from frequent washdowns with harsh cleaners. These transmitters are sealed and have a highly polished surface, leaving no room for bacteria to grow and making them easier to clean. They’re rated IP67 for protection from dust, high-pressure jets of water, and submersion in up to a meter of water for 30 minutes.
To achieve a 4X resolution increase, use these transmitters with a controller that has quadrature detection.
Transmitters with three mounting holes are designed to fit on a three-hole servomotor face.
Connect transmitters to counters and controllers with cables (sold separately).
Use a flexible shaft coupling to connect the transmitter shaft to a drive shaft.
Overall | Shaft | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Counter Function | Output Channels | Resolution | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Lg. | Ht. | Dia. | Lg. | Mounting Plate Dia. | No. of | Ctr.-to-Ctr. | Thread Size | Specifications Met | Each | |
316 Stainless Steel Body and 303 Stainless Steel Shaft | ||||||||||||||||
Quadrature Output Channel—20mA Output Current | ||||||||||||||||
| Up and Down | A, B, Z | 600 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 0000000 |
| Up and Down | A, B, Z | 1,000 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 1,024 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 2,048 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 2,500 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 3,600 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 4,096 | 2X, 4X | 8,000 | 4.75-28V DC | 2.44" | 3.13" | 0.4" | 0.4" | 2.29" | 3 | 1.43" | M4 × 5 mm | CE Marked | 00000000 | 000000 |
Overall | Shaft | Mounting Plate | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Counter Function | Output Channels | Resolution | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Lg. | Ht. | Dia. | Lg. | Lg. | Wd. | No. of | Ctr.-to-Ctr. | Dia. | Specifications Met | Each | |
316 Stainless Steel Body and 303 Stainless Steel Shaft | |||||||||||||||||
Quadrature Output Channel—20mA Output Current | |||||||||||||||||
| Up and Down | A, B, Z | 600 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 0000000 |
| Up and Down | A, B, Z | 1,000 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 1,024 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 2,048 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 2,500 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 3,600 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 000000 |
| Up and Down | A, B, Z | 4,096 | 2X, 4X | 8,000 | 4.75-28V DC | 3.175" | 3 1/4" | 3/8" | 1 1/16" | 2 1/2" | 2 1/2" | 4 | 2.06" | 7/32" | CE Marked | 00000000 | 000000 |
Rotary Motion Position-Measuring Transmitters
Provide motion feedback to counters, controllers, and motor drives for automated motion control and measurement applications. Also known as encoders, transmitters convert rotary motion to an electrical signal so you can operate your system based on distance, direction, and speed of travel. Transmitters have Pull-Up Resistor output.
Use a flexible shaft coupling (not included) to connect the transmitter shaft to a drive shaft.
Mount a wheel (not included) to use transmitters to measure lengths.
Use cables (not included) to connect transmitters to counters and controllers.
Transmitters with a quadrature output channel must be used with a controller that has quadrature detection to get a 4X resolution increase.
Mount. Plate | Mount. Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Counter Function | Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Output Current, mA | Shaft Coupling Required | Body Material | Shaft Material | Lg. | Wd. | Ctr.-to-Ctr. | Thread Size | Choose a Resolution | Each | |
Single Output Channel | |||||||||||||||
| Up | A | 2X | 6,000 | 5V DC-28V DC | 250 | Yes | Aluminum | Stainless Steel | 2 1/4" | 2 1/4" | 1.41" | 6-32 | 00000000 | 0000000 | |
Quadrature Output Channel | |||||||||||||||
| Up and Down | A, B | 2X, 4X | 6,000 | 5V DC-28V DC | 250 | Yes | Aluminum | Stainless Steel | 2 1/4" | 2 1/4" | 1.41" | 6-32 | 00000000 | 000000 | |
| Aluminum Mounting Bracket (2.6" Lg. × 2 1/2" Wd. × 3.9" Ht.; No. 12 Screws Required) | 00000000 | Each | 0000000 |
| 12" Circumference Rubber Wheel (3.82" Dia. × 3/4" Wd.) | 00000000 | Each | 000000 |
| 12" Circumference Polyurethane Wheel (3.82" Dia. × 0.7" Wd.) | 00000000 | Each | 00000 |
| 20-ft. Cable | 00000000 | Each | 00000 |
| 10-ft. Cable | 00000000 | Each | 00000 |
| 1/2-ft. Cable | 00000000 | Each | 00000 |
| 32 3/4-" Cable | 00000000 | Each | 000000 |
Rotary Motion Position-Measuring Transmitter Kits
In addition to a transmitter, these kits include a 6 1/2-ft. cable and a mounting bracket. Also known as encoders, transmitters convert motion to an electrical signal to indicate distance, direction, and speed in process control and metering applications. These kits are commonly used to monitor the position or velocity of rotating equipment. You can also mount a wheel (not included) to measure distance in linear applications. Transmitters must be used with a controller that has quadrature detection to get a 4X resolution increase. Output channel Z is also known as an index channel.
Use a flexible shaft coupling (not included) to connect the transmitter shaft to a drive shaft.
| For Counter Function | Output Channels | Resolution Increase | For Max. Shaft Speed, rpm | Input Voltage | Output Current, mA | Resistor Included | Body Material | Shaft Material | Fasteners Included | Fasteners Required | For Mounting Screw Size | Choose a Resolution | Each | |
Quadrature Output Channel | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Up and Down | A, B, Z | 2X, 4X | 6,000 | 5V DC-28V DC | 20 | No | Plastic | Stainless Steel | No | Yes | 1/4" | 00000000 | 0000000 | |
| 6" Circumference Polyurethane Wheel (1.91" Dia. × 1/4" Wd.) | 00000000 | Each | 000000 |