These receptacles are for light-duty use.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Install these receptacles indoors. They keep personnel safe from electric shock by adding ground fault protection.

Internal shutters prevent the insertion of foreign objects and accidental contact with power.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

Prevent damage to electronic equipment caused by spikes in voltage.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

When mated, connectors and cords meet NEMA 4X, 6P, and IP67 for protection against washdowns and temporary submersion.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

Add a fuse to protect equipment from current overload. When mated with a receptacle, these plugs have an extra-tight fit to remain secure in high vibration environments. They're also known as hospital grade plugs.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Also known as hospital-grade receptacles, these have an extra-tight fit when mated to withstand high vibration. They prevent damage to electronic equipment caused by spikes in current. Mount to DIN rail.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Instead of hardwiring power supplies, appliances, and other electronic devices, these connectors let you plug in an IEC power cord and turn the power on and off without needing a separate switch.

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

Change AC voltage to DC voltage and bring power to electronic devices while protecting them from harmful electromagnetic interference (EMI).

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

For use with washdown receptacles, these outlet boxes withstand corrosive and washdown environments.

Protect plugs and sockets in washdown environments when not in use.

A rubber housing protects these connectors from damage caused by drops and impact. They turn to lock together when mated to prevent accidental disconnection.

A quarter turn locks these connectors in an outlet to remain secure in high-vibration applications and prevent accidental disconnection. They are not compatible with NEMA configurations.

Connect and disconnect with the power on—spring-loaded contacts open like a switch when separating the connectors, preventing an electrical arc.

Use connectors where ignitable gas and dust may be present, such as in refineries and silos. They also prevent an electrical arc when separating mated connectors so you can safetly connect and disconnect with the power on.

Meet international standards IEC 309-1 and 309-2.

Each set includes one plug and one socket. These connectors withstand moisture, harsh engine fluids, and high temperatures. Also known as weather-pack connectors.

Configure a connector for your application by combining housings with pins and sleeves for different wire sizes. Also known as weather-pack connectors, they withstand moisture, harsh engine fluids, and high temperatures.

Connectors lock into place for a secure connection in high-vibration environments. They power small devices, such as chargers for electronics, from a vehicle. Also known as cigarette-lighter plugs and sockets.

Protect high-current connectors when not in use.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

A combination of an outlet box, cord, and duct, these outlet strips minimize tripping hazards and protect the cord from damage.

Connect multiple devices from a single outlet.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

These curved outlet strips clamp onto a pole or table leg.

Install these outlet strips in an opening in workbenches, tables, and other furnishings; the outlets lie flush with the surface for a seamless appearance.

Bring power to workstations that are not near a wall—these poles mount from the ceiling.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.

Insulated to resist water, oil, and solvents, these cords withstand dirty and greasy environments.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Plug these cords into a vehicle outlet to power a device from the vehicle's battery.

For use with high-current equipment, these cords are compatible with IEC 60309 connectors and devices.

Close off unused outlets.

Knockouts allow you to modify these boxes to fit your application.

Close off unused switches.

Close off unused outlets.

Knockouts allow you to modify these boxes to fit your application.

Add depth to octagonal outlet boxes.

Mount these boxes to the outside of an enclosure to access a programmable logic controller or other networked device without opening the enclosure.

Protect the edges of carpet surrounding your outlet boxes.

Mount these boxes on the surface of your wall in areas where you can't create a recess.

These boxes have an open back to accommodate extra-deep low-voltage devices.

Build your own outlet box or replace a damaged box.

These corrosion-resistant covers can withstand rain, snow, and wet conditions without being damaged.

Close off unused outlets.

These corrosion-resistant boxes are built to withstand exposure to rain, snow, and wet conditions.

Rain, snow, and wet conditions won't damage these corrosion-resistant covers.

Close off unused switches and outlets.

Close off unused switches and outlets.

Pair wall plates and adapters to create a custom cover for existing receptacles and switches to give them a rejuvenated look, no rewiring required.

Use these corrosion-resistant fittings in a low-pressure pipe line.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use these fittings for low-pressure applications in noncorrosive environments.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.