Use these connectors in general purpose residential and commercial applications.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.

Charge mobile devices without an adapter.

Minimize the risk of electric shock and electrical fires with a single receptacle.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Access the wire connection by opening the hinged housing. These connectors have screw terminals to create a secure connection; wire must be stripped before winding around the screw terminal.

Check the status of a ground connection—a green light signals that connectors have power and are safely grounded.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation. When mated with a receptacle, these plugs have an extra-tight fit to withstand high vibration. Also known as hospital grade plugs.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Stainless steel hardware and nickel-plated blades or slots protect connections from damage in corrosive environments.

Visually confirm that sockets have power—the face lights up when they're connected. The rubber housing protects them from damage caused by drops and other impact.

Keep personnel safe from electric shock by adding ground fault protection to all outlets on the same circuit. These receptacles mount to DIN rail.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices.

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords.

Also known as twist-lock devices, these connectors withstand tough, repetitive use, and are more durable than standard turn-lock connectors. They turn to lock together when mated to prevent accidental disconnection.

A good fit for tight spaces, these connectors are also known as NEMA midget plugs. They turn to lock together when mated to prevent accidental disconnection.

When mated, these connectors meet NEMA 6P for protection against washdowns and temporary submersion.

Rated NEMA 6P, NEMA 13, IP66, and IP69K when mated, these connectors withstand high-pressure, high-temperature washdowns, oil/coolant splashing, and are corrosion-resistant so they can be used in high-vibration marine environments.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Also known as hospital-grade outlet strips, these outlets have an extra-tight fit to prevent plugs from detaching. They are marked with a green dot.

With a rubber housing, these outlet strips withstand drops and other impact.

Turn a single outlet into five outlets with ground fault protection to minimize the risk of electric shock.

Create a permanent outlet system without opening walls. These outlet strips mount to a wall with clips and hardwire to an existing electrical system.

Mount these strips into standard 19" wide electronics racks and enclosures.

Minimize the risk of electric shock by adding ground fault protection to a standard outlet.

Designed for indoor use, these cords are often used to power appliances.

In addition to an outlet on the end, these cords have multiple inline outlets.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.