Power electronics in damp environments while protecting them from electromagnetic interference. The filter on these connectors reduces electromagnetic interference, which could damage components and cause your electronics to behave erratically. These connectors pair with industry standard cords often found on electronic devices. Wire them using the quick-disconnect terminals, which slide together with matching terminals on your device for a secure fit that can still be pulled apart by hand and removed for repairs. The terminals are on the back of the connector, so the wiring stays inside your device.

Class I shock protection means these connectors have insulation and a protective ground. They meet UL 94 V-0, so they self-extinguish within 10 seconds if they catch fire and won’t spread the fire by dripping. They’re also UL and C-UL recognized components, CE and ENEC marked—they meet U.S., Canadian, and European safety standards. They are rated IP65 for protection from dust and rinsing.

When selecting a connector, make sure the current is at or slightly above the requirements of your device for the best EMI filtering performance. These connectors require fuses (sold separately) to prevent short circuits and circuit overloads from damaging your devices.

For technical drawings and 3-D models, click on a part number.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connectors.

A- and C-coded connectors send both power and signal, while K-, L-, S-, and T-coded connectors only send power. Choose A-coded connectors for AC and DC sensors, actuators, motors, light curtains, and other devices. They’re often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems. C-coded connectors are often used with AC sensors and actuators.

Receptacles thread into panels and walls, making them best for stationary or permanent installations such as control panels. IP67 and IP68 rated connectors can withstand brief submersion. IP69 rated connectors stand up to high-temperature, high-pressure spraying water. Add caps to protect connectors and maintain their IP and NEMA ratings when not in use.

Note: Sockets and female receptacles may have extra holes on their face that are not used.

For technical drawings and 3-D models, click on a part number.

Quickly mate these connectors by pushing them together. They have an A-coded face and are often used with 12 mm proximity switches to send power and signal to automated systems and Profibus systems. All are rated IP69K for protection from dust and high-pressure, high-temperature washdowns.

Connectors rated NEMA 6 are protected against temporary submersion.

Sockets and female receptacles may have extra holes on the face that are not used.

For technical drawings and 3-D models, click on a part number.

Also known as pico connectors, these are for low-current devices such as 8 mm and smaller proximity switches and photoelectric switches.

To view wiring diagrams, select a part number and click Product Detail.

Receptacles thread into panels and walls, so they work well in stationary or permanent installations.

IP67 rated connectors protect against dust and temporary submersion. NEMA 6 rated connectors protect against dust, washdowns, and temporary submersion.

Note: Sockets and female receptacles may have extra holes on the face that are not used.

For technical drawings and 3-D models, click on a part number.

Minimize signal loss between low-current devices with M8 connections. The shielding on these connectors reduces signal interference from nearby devices, such as motors and speed controls. Also known as pico connectors, M8 connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

To view wiring diagrams, select a part number and click Product Detail.

Receptacles thread into panels and walls, so they work well in stationary or permanent installations.

IP or NEMA rated when mated, all seal out dust. IP68 rated connectors withstand submersion. NEMA 6P rated connectors protect against weather, washdowns, corrosion, and submersion.

For technical drawings and 3-D models, click on a part number.

Connect hydraulic and air-powered valves, motors, pumps, and pressure switches.

IP65 rated connectors protect against water projected from a nozzle.

For technical drawings and 3-D models, click on a part number.