Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment. Their poles and keyways adhere to standard coding layouts, reducing the chance you’ll mismatch connectors.

A- and C-coded connectors send both power and signal, while K-, L-, S-, and T-coded connectors only send power. Choose A-coded connectors for AC and DC sensors, actuators, motors, light curtains, and other devices. They’re often used to connect equipment to IO Link controllers and within Profibus, DeviceNet, and other fieldbus systems. C-coded connectors are often used with AC sensors and actuators.

Receptacles thread into panels and walls, making them best for stationary or permanent installations such as control panels.

When mated, all connectors are IP rated to seal out dust. IP67 and IP68 rated connectors can withstand brief submersion. Add caps to protect connectors and maintain their IP and NEMA ratings when not in use.

Note: Sockets and female receptacles may have extra holes on their face that are not used.

For technical drawings and 3-D models, click on a part number.

Quickly mate these connectors by pushing them together. They have an A-coded face and are often used with 12 mm proximity switches to send power and signal to automated systems and Profibus systems. All are rated IP69K for protection from dust and high-pressure, high-temperature washdowns.

Connectors rated NEMA 6 are protected against temporary submersion.

Sockets and female receptacles may have extra holes on the face that are not used.

For technical drawings and 3-D models, click on a part number.

Rated to MIL-DTL-5015 specifications, these connectors are compatible with other products that meet the same standard. They can withstand high-vibration applications and frequent connection and disconnection. All come assembled with pins and sockets in place. When mating connectors, both the gender and housing thread location must be opposite.

Caps (sold separately) protect connectors when not in use.

For technical drawings and 3-D models, click on a part number.

Connectors secure with a quarter turn when mated, yet unlock and pull apart with minimal force. All have the same pin and socket configurations as MIL-DTL-26482, so they are compatible with other products that meet the same standard. They’re rated IP67 to protect against dust and temporary submersion. When mating connectors, the gender and housing lock location must be opposite. Poles are labeled with letters on the face of the connectors to ensure proper connection.

Crimpers (sold separately) are required for wire installation.

For technical drawings and 3-D models, click on a part number.

Connect hydraulic and air-powered valves, motors, pumps, and pressure switches.

IP65 rated connectors protect against water projected from a nozzle.

For technical drawings and 3-D models, click on a part number.

Immediately cut power with a single push. The large palm-sized buttons on these switches provide an easy target, so they're easy to use even while wearing gloves. When the button is depressed, the switch latches and can be locked in that position using a lockout or padlock with a 9/32” shackle diameter (not included). All have positive force contacts that will open the circuit when actuated even if a spring fails or the contacts stick. They're rated NEMA 13 and IP65 for protection from oil/coolant spraying and washdowns.

For technical drawings and 3-D models, click on a part number.