Capacity @ Hanger Spacing Capacity @ Hanger Spacing |
---|
|
Weight Weight |
---|
|
Mounting Location Mounting Location |
---|
|
Use with conveying chain to automatically move these trolleys along the beam. The two-bolt bottom connection keeps the trolleys from loosening during use.
For technical drawings and 3-D models, click on a part number.
Track provides the runway for trolleys in manual and powered systems.
Note: Not designed for building structural support.
For technical drawings and 3-D models, click on a part number.
Chain connects trolleys and guides movement along the track. It can be assembled and disassembled without tools, yet its design makes it difficult to disconnect while in use.
For technical drawings and 3-D models, click on a part number.
Prevent excess wear on the track and trolley—only the wheels of these push trolleys come in contact with the beam. Trolleys can be installed anywhere along the beam.
For technical drawings and 3-D models, click on a part number.
Hooks allow items to rotate 90° degrees while suspended. They attach to trolleys with a bolt and nut.
For technical drawings and 3-D models, click on a part number.
Hook | ||||||||
---|---|---|---|---|---|---|---|---|
Opening Wd. | Usable Lg. | Movement | Material | Mounting Fasteners Included | Mounting Hole Dia. | Max. Temp., °F | Each | |
1 1/4" | 4 1/8" | 90° Rotation | Iron | No | 1/2" | 450° | 0000000 | 000000 |
Track provides the runway for trolleys, carriers, and chain in manual and powered systems. The enclosed track protects trolleys and chain from contamination and damage. Install at least one support bracket (sold separately) every 5 feet.
For technical drawings and 3-D models, click on a part number.
Ht. | Wd. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Lg., ft. | Inside | Overall | Inside | Opening | Thick. | Cap., lbs. | Material | Color | Max. Temp., °F | Each | |
10 | 2 3/8" | 2 11/16" | 2 1/2" | 1" | 5/32" | 250 | Painted Steel | Blue | 450° | 0000000 | 0000000 |
Push to move material along the conveyor.
For technical drawings and 3-D models, click on a part number.
Material | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall Ht. | For Inside Track Wd. | Ht. | Wd. | Eye Dia. | Cap., lbs. | Frame | Wheel | Bearing | Bearing Type | Max. Temp., °F | Each | |
4 9/16" | 2 1/2" | 1 1/2" | 6" | 17/32" | 250 | Iron | Steel | Steel | Ball | 450° | 0000000 | 000000 |
Carry loads along a track with this series of smooth rolling alternating vertical and horizontal wheels. Use a carrier to attach your load to the chain. Vertical wheel axles spaced every 8" serve as attachment points for carriers. Note: Capacity listed is per attachment point.
For technical drawings and 3-D models, click on a part number.
Lg., ft. | Cap. per Attachment Point, lbs. | Vertical Wheel Spacing | Material | Connecting Pin Material | Max. Temp., °F | Each | |
20 | 125 | 8" | Steel | Steel | 450° | 0000000 | 0000000 |
Use brackets to hang and join sections of enclosed track. They have a hole in the top for hanging from threaded rod.
Support bracket holds track in place with nuts (not included) on threaded rod.
Joint bracket connects two sections of track when tightened with the included bolts.
For technical drawings and 3-D models, click on a part number.
Carriers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes. Use where swinging loads are permitted.
For technical drawings and 3-D models, click on a part number.
Eye Dia. | |||||||||
---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | (A) | (B) | Max. Incline | Cap., lbs. | Material | Max. Temp., °F | Each | |
4 1/4" | 1" | 11/32" | 7/16" | 45° | 125 | Steel | 450° | 0000000 | 00000 |