To help keep the contents of a sealed enclosure safe from water damage, these padlockable latches help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn latches, they have an arm that rotates 90° to secure your enclosures.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Select the turn direction when mounting the cam. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from damaging paint or metal chips. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than zinc latches.

Maintain an IP65 rating on your sealed enclosure for low-pressure washdowns. A key shutter on these locks adds another layer of protection to guard the cylinder from water and dust. Also known as quarter-turn locks, these locks have an arm that rotates 90° to secure enclosures. All locks can be locked with a key as well as a padlock for enhanced security. Choose them if you need locks that each open with a different key.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from damaging paint or metal chips. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

A hex key opens these locks, making them great for a facility where you don’t want a complicated keying system. Also known as quarter-turn locks, these locks have a cam that rotates 90° to lock cabinet doors, file drawers, and other enclosures. Add a padlock for extra security. A gasket prevents water, dust, and dirt from getting into an enclosure through the lock. This helps you maintain an IP65 and NEMA 4 rating in your sealed enclosure. All come with multiple cams to accommodate different latching distances.

Simplify your enclosure’s keying system—these locks open and close with a slotted screwdriver. Also known as quarter-turn locks, they have a cam that rotates 90° to lock cabinet doors and other enclosures. Add a padlock for extra security. A gasket prevents water, dust, and dirt from getting into your enclosure through the lock. This helps you maintain the IP65 and NEMA 4 ratings of your sealed enclosure. These locks come with multiple cams, so you can change their fixed latching distance.

For a secure hold, lift the handle, turn it a quarter-turn to close, and then push it down to reach full compression. Also known as compression cam locks, these locks create a tighter hold than traditional cam locks, making them useful for doors that have a seal. The tight hold also reduces rattling from vibration. Add a padlock for extra security, so the handle can’t turn.

These locks include one cam with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them.

Keep the contents of your sealed enclosure safe from water damage with these locks that help maintain the enclosure's IP or NEMA rating for low-pressure washdowns. Also known as quarter-turn locks, they have an arm that rotates 90° to secure your enclosures. All of the locks can be locked with a key as well as a padlock for added security. Choose them if you need several locks that open with the same key.

All of the cams in these locks have a fixed latching distance. Since you won’t have to adjust the cams into position, these locks are faster to install than those with an adjustable latching distance. Locks with straight and offset cams include multiple cams, so you can change the fixed latching distance. Locks with a roller cam rotate more smoothly than those with straight and offset cams, making them easier to open and close. The cam won't scrape paint or metal chips off the frame that can damage sensitive electronics inside the enclosure. The roller cam also compresses a bit to help eliminate rattling noises from vibration.

A gasket helps keep dust and water from washdowns or brief submersions from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. They have a cam that rotates to secure your enclosure.

These latches include multiple cams, so you can change their fixed latching distance. Since you won’t have to adjust the cams into position, these latches are faster to install than those with an adjustable latching distance.

Use stainless steel latches in areas that are constantly exposed to moisture since they resist corrosion better than zinc latches.

It’s harder to snag straps and other items on these wing-handle latches than on T- or L-handle latches. Also known as compression cam latches, these create a tighter hold than a traditional cam latch, making them useful for doors that have a seal. Push the handle in to turn the head a quarter turn and latch. Releasing the handle draws the cam firmly against the door to minimize rattling from vibration. Add a padlock for extra security, so the handle can’t turn.

These latches include one cam that has a fixed latching distance. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

A slotted screwdriver opens and closes these locks, so you can avoid a complicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. Add a padlock for extra security.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating.

Help keep your sealed enclosure's contents safe from dust and water damage—these locks help maintain an enclosure's IP or NEMA rating for low- or high-pressure washdowns. Often installed on electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. All locks can be locked with a key as well as a padlock. Choose these locks if you need several locks that open with the same key.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. All come with multiple cams to change their fixed latching distance. Since you won’t have to adjust the cams into position, they are faster to install than those with an adjustable latching distance.

Use stainless steel locks in areas that are constantly exposed to moisture since they resist corrosion better than zinc locks.

Locks with a stainless steel shutter block rain, snow, and dirt from entering the lock cylinder, which can cause internal damage.

Multiple gaskets help keep dust and high-pressure washdowns from entering through these latches. This helps you maintain your sealed enclosure's IP or NEMA rating. Often installed on electrical panels, these latches have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by.

Also known as quarter-turn latches, these latches have a cam that rotates 90° as you swing the handle. All come with multiple cams to change their fixed latching distance. Since you won’t have to adjust the cams into position, they are faster to install than those with an adjustable latching distance.

Open and close these locks with a hex key (not included) for an uncomplicated keying system. Often installed on server cabinets and electrical panels, they have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. Add a padlock for extra security.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. An O-ring stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP65 rating.

Open these locks with a triangle key (sold separately)—it’s more secure than a hex key or screwdriver, yet still matches a common keying system for industrial enclosures and other machinery. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The cam rotates 90° as you swing the handle, so they’re also known as quarter-turn locks. When locked, the handle lies flat, which means it won’t snag anything passing by. For extra protection, these locks have a concealed design that stops others from tampering with them using pliers and a spot to attach a padlock.

A gasket stops dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP66 and NEMA 4 ratings. These locks come with multiple cams, so you can change their fixed latching distance.

For a simple yet secure keying system, these locks open with a two-way key (sold separately), also called a double-bit key. It’s commonly used on industrial enclosures and other machinery, yet it’s more secure than a hex key or screwdriver. Often installed on server cabinets and electrical panels, these locks have a handle that swings smoothly when you lift it to latch and unlatch the door. The handle lies flat when locked, which means it won’t snag anything passing by. For extra protection, these locks have a concealed design that stops others from tampering with them using pliers and a spot to add a padlock.

Also known as quarter-turn locks, these locks have a cam that rotates 90° as you swing the handle. They come with multiple cams, so you can change their fixed latching distance. A gasket keeps dust and water from getting into your sealed enclosure through the lock. This helps you maintain the enclosure’s IP66 and NEMA 4 ratings.

Ideal for high-vibration environments, these latches create a tighter hold than standard cam latches on cabinet doors and file drawers. Also known as compression cam latches, they have a T-handle you turn 90° to latch, then turn it another 90° to draw the cam firmly against your enclosure. The second turn creates compression, which is good for enclosures with a seal. It also reduces rattling from vibration. Add a padlock for extra security. A gasket blocks water, dust, and dirt from getting into a sealed enclosure through the latch, helping you maintain an IP65 and NEMA 4 rating on your enclosure. Made of stainless steel, these latches resist corrosion when exposed to constant moisture. All come with multiple cams for different latching distances.

Latches with a fixed latching distance are best when you know the precise distance you need. Since you won’t have to adjust the cam into position, these are faster to install than those with an adjustable latching distance.

Latches with an adjustable latching distance handle a wide range of latching distances, so they’re best for tasks where precise distances are unknown. Adjust the position of the cam before you begin to install them. They project further into the enclosure than those with a fixed distance.

Select the turn direction of these latches when mounting the cam. Each latch comes with two straight cams to accommodate different latching distances.

To fit in tight areas, these latches have a knob instead of a handle. Turn the knob 90° and the cam rotates to hold your enclosure shut. Use the included hardware to choose which direction the latch rotates 90° or leave out the hardware so the cam rotates 180°. If you add a padlock for extra security, the knob can’t turn.

Great for a facility where you don’t want a complicated keying system, these locks open with a slotted screwdriver. They’re also padlockable for extra security. Also known as quarter-turn locks, these cam locks have an attached arm that rotates 90° to lock cabinets, file drawers, and other enclosures. When installed in a sealed enclosure, they help maintain an IP65 level of protection to prevent water from getting in through the lock. They also help seal out dust and dirt. All come with multiple cams to accommodate different latching distances.

More secure than locks that open with a hex or slotted driver, these locks open with a square key (sold separately). They match a keying system that is common for industrial enclosures, control cabinets, and other machinery, so you can keep a simple keying system around your facility. Their concealed design stops others from tampering with them using pliers. Add a padlock for extra security. Often called quarter-turn locks, these locks have an attached arm that rotates 90° to lock the enclosure. A seal blocks water, dust, and dirt from getting into a sealed enclosure through the lock, helping you maintain an IP65 rating on your enclosure. All come with multiple cams to accommodate different latching distances.

Design a latching system that fastens doors at multiple points—for extra security, these L-handle latches have a spot for a padlock. The L-handle latch acts as your base. Then add the included cam latch adapter to connect to additional latch points. For each new latch point, you need an inline or 90° cam latch, a rod, and two rod adapters. Weld cam latches to the inside of your enclosure door. These L-handle latches come with multiple cams, so you can change their fixed latching distance.

Inline cam latches come with multiple cams to accommodate different latching distances.

Inline roller cam latches rotate more smoothly than standard inline cam latches, making them easier to open and close. The cam won’t scratch or flake enclosure surfaces to protect electronics inside from paint or metal chips. Good for jobs when precise distances are unknown, they have an adjustable latching distance. Adjust the position of the cam before installing.

90° redirect cam latches mount to corners, so you can add latch points to the top or bottom of your door. To accommodate different latching distances, they come with multiple cams.

Rods connect latches to each other. Cut them to the length you need.

Rod adapters connect rods to latches. You need one for each rod end.

Side, top, and bottom latching points secure large, heavy doors that are subject to strenuous use, such as those on trucks and large access doors. This padlockable latch has two handles; an outside handle with a spindle that mounts through the door and an inside safety-release handle that opens the latch even if the outside handle is locked. It has a straight cam for side latching. For top and bottom latching, rods connect the top and bottom slide bolts. Use a hacksaw to cut rods and spindle to size. Select the turn direction of the latch when mounting the cam.

Pair a handle with a cam latch and rod to create a keyed latching system that securely fastens doors at multiple points. Also known as compression cam locks, these locks create a tighter hold than a traditional cam lock, making them useful for doors that have a seal. Turn the handle a quarter turn to lock, then turn it another quarter turn to create compression and minimize rattling from vibration. The handle lies flat when locked, which means it won’t snag anything passing by. Choose these locks if you need several locks that open with the same key.

Add a padlock to keyed/padlockable handles for an added layer of security. These handles are often used in lockout-tagout procedures to ensure equipment is properly shut off.

Weld cam latches to the inside of your enclosure door. All come with multiple cams, so you can change their fixed latching distance. Latches for one rod can be used as the main latch with a handle to control one additional latch point. You can also use them as a final latch point along a line in your multipoint system. Latches for two rods can be used as the main latch with a handle that controls two additional latch points. Or use them as a midpoint latch that is controlled by the main latch for operating yet another latch along your multipoint system. Use 90° redirect cam latches on the inside corners of your door to redirect your multi-point latching system 90° and add additional points along other edges of the door.

Rods connect latches to each other. Cut them to the length you need.