Nylon mesh is embedded with precision-shaped ceramic alumina, which cuts through hard metals like stainless steel faster than other forms of ceramic alumina because of its sharp, outwardly pointed grit.

Get twice the life over standard nylon mesh cushioned discs—the flexible mesh in these discs is embedded with a premium form of aluminum oxide that aggressively removes material from steel and wood.

Precision-shaped ceramic alumina discs abrade hard metals like stainless steel faster than standard ceramic alumina discs because of their sharp, outwardly pointed grit.

A coating prevents dust and debris from building up on the abrasive surface.

Used for stripping, these discs eliminate discoloration from heat buildup.

The ceramic alumina abrasive on these discs is sharp and dense enough to shape hard metals such as stainless steel, nickel, and cast iron without dulling quickly.

The premium abrasive stays sharp longer.

Fit these discs over your tool's arbor to sand masonry, ceramics, and composites.

Overlapping abrasive flaps bonded to a backing plate provide consistent material removal and even finishes.

These discs have a harder abrasive than standard flap sanding discs.

These discs have 30% more flaps than standard flap sanding discs to last longer.

The flaps alternate between an abrasive to remove material and a lubricant that minimizes heat to reduce discoloration of the work surface.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

Set at an angle and widely spaced, the overlapping abrasive flaps reach into corners.

With more flaps than standard discs, these last 30-40% longer.

These discs have a harder abrasive than standard flap sanding discs.

The flaps wrap around the outer edge of these discs to sand welds at right angles.

With more flaps than standard discs, these last 30-40% longer.