Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading.

Touch up scratches and wear on your enclosure with paint that matches its color.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

Enhance, renew, and protect surfaces.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.

Make a magnetic writing surface for your workspace.

Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.

This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.

Apply these coatings directly to rust to prevent it from spreading and to stop new rust from forming. Often used on containers, trailers, and in marine restoration, they create a durable, impact-resistant surface that permanently stops rust.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Use these dyes after anodizing and before sealing to add a decorative appearance.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

These coatings provide chemical, corrosion, and impact resistance on grit-blasted concrete and primed steel in immersion, underground, and waste-water treatment applications.

This potting compound meets ASTM D635 and UL 94 V-0 requirements for flammability.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.

Choose only the colors you need.

Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.

Write on wet surfaces or underwater. These paint markers also work well on dirty, rusty, and oily surfaces.

These long-life markers hold twice as much paint as our other fabric paint markers.

Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.

These paint crayons work well even on dirty, rusty, and oily surfaces.

Write on concrete, forgings, castings, and other rough surfaces with these paint crayons.

Low in chlorides and halogens, these crayons won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.

Repair worn and torn rubber parts. These two-part fillers are self leveling and form a tough, flexible new surface. They're often used with conveyor belts, mill liners, and pumps.

These patching compounds are the most flexible and watertight we offer.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Made of pinhole-free crepe paper to seal out light. It is often used in photo processing labs.

Outline and draw attention to safety zones and hazards with this tape.

Splice rubber O-rings and other gaskets with this chemical resistant adhesive.

Mark crucibles and other porcelain labware used in high-heat applications. The marked surface must be heat-treated to become permanent.