Turn any surface into a dry-erase board.

Cover sharp edges, corners, and weld seams with these thick epoxy coatings for protection against cuts and snags.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

These coatings are often used in food-processing areas. They form a tacky film that provides long-lasting protection against rust and corrosion. Remove with an alkaline cleaner.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

Protect tools, dies, and other parts during shipping and storage with these durable, removable coatings. After peeling, they leave a greasy film for continued corrosion protection. Once removed, coatings can be melted again for repeat use.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Prevent the growth of harmful and odor-causing bacteria, mold, and fungus on HVAC system components and hardware. These coatings contain silver, which inhibits the growth of mildew, mold, and fungus.

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them on structural lumber, decking, and wood shingles.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Made of polyester plastic, this tape resists tearing in high-temperature masking jobs, such as on circuit boards and when powder coating.