Choose a Category
Clear All
Color Color | Show |
|---|
 | Copper |
Color Color | Hide |
|---|
Container Type Container Type |
|---|
 | Stick |
Consistency Consistency |
|---|
|
Begins to Harden Begins to Harden |
|---|
|
Diameter Diameter |
|---|
|
Length Length |
|---|
|
Environment Environment |
|---|
|
For Use Outdoors For Use Outdoors |
|---|
|
For Use With For Use With |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Maximum Thickness Maximum Thickness |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Mixing Required Mixing Required |
|---|
|
Reaches Full Strength Reaches Full Strength |
|---|
|
Specifications Met Specifications Met |
|---|
|
Clarity Clarity |
|---|
|
Container Size Container Size |
|---|
|
Formulation Formulation |
|---|
|
Type Type |
|---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
|---|
|
Surface Fillers for Metal
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal. The size listed is the combined total of the two parts.
NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Consistency | Approx. Coverage @ Thick. | Temp. Range, °F | Color | Specifications Met | Finishing Method | For Use On | Each | |
Surface Fillers | ||||||||||||
| 4 oz. | Stick | 3 | 24 | Putty | 16 sq. in. @ 1/4" | -40° to 250° | Copper | NSF/ANSI 61 | Drill, Sand, Saw | Brass, Bronze, Copper | 0000000 | 00000 |
The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)