Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

Enhance, renew, and protect surfaces.

Solvent-based paint keeps its color longer than water-based paint when used outdoors.

Paint that cannot be sold to the regions listed exceed local regulatory limits on VOC (volatile organic compounds).

Hide blemishes and protrusions on shingles and flashing. This paint matches common roofing material. It dries quickly to help keep leaves, pollen, and other contaminants from adhering, damaging your finish. Once dry, paint prevents corrosion on flashing and other metal surfaces.

These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings. Apply with a brush, roller, or sprayer. They cannot be sold to the regions listed due to local chemical regulations, including limits on VOC (volatile organic compounds).

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F. Apply with a brush, roller, or sprayer.

These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals. Coatings may chalk with exposure to sunlight. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention. Apply with a brush, roller, or sprayer. They're often used as a topcoat over epoxy coatings.

Thinners cannot be sold to California, Colorado, Connecticut, Delaware, Maryland, New Hampshire, Rhode Island, or Utah due to VOC (Volatile Organic Compounds) regulations.