We will reply to your message within an hour.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
Enhance, renew, and protect surfaces.
Unlike paint that must be diluted, this paint comes ready for use with an air brush.
Mark traffic lanes, parking lots, and factory floors.
Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.
This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.
This paint adheres to most types of plastic without sanding or priming.
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
This water-based paint sprays in an inverted position and will not harm grass or other plant life.
This paint lays on thicker than other turf marking paint, making cleaner, bolder lines. It is water based and will not harm grass or other plant life.
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.
Apply these coatings in temperatures down to 20° F, when other coatings would fail. They handle high humidity and have superior abrasion, impact, and UV resistance while providing great color and gloss retention.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.
Use these dyes after anodizing and before sealing to add a decorative appearance.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Shield circuit boards from flux, solder, conformal coatings, and high temperatures.
Get a controlled, no-drip pour every time.
Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.
These primers convert rust into a layer of protection that prevents new rust from forming. Use them to prepare your surface to extend the life of paint and coatings.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.
These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.
Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.
Choose only the colors you need.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.
These long-life markers hold twice as much paint as our other fabric paint markers.
These long-life markers hold twice as much paint as our other wet-surface paint markers.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
Write on wet surfaces or underwater. These paint markers also work well on dirty, rusty, and oily surfaces.
Good for wet environments, the writing from these markers won't come off with water alone.
Low in chlorides and halogens, these markers won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.
These paint crayons work well even on dirty, rusty, and oily surfaces.
Low in chlorides and halogens, these crayons won't corrode or contaminate surfaces where degradation is a concern such as stainless steel. They're typically used in nuclear plants and oil and gas refineries.
Paint dries immediately when applied to heated metal and won't smear, char, discolor, or peel.
Marks written at room temperature will hold up through heating and cooling processes. Use on welds, ingots, castings, forgings, and other metal surfaces.
Write on glass, metal, paper, and wood.
Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.
Stain metal items such as bearings, springs, nuts, and other components.
Make scribe lines on surfaces easy to see with these fast-drying fluids.
Choose from highly visible fluorescent colors.
For outdoor painting jobs, this plastic tape stands up to the elements. The high-tack adhesive works on rough exterior surfaces, such as stucco and masonry.
This vinyl tape meets clean room requirements and won't leave residue behind. It comes sealed in a plastic bag.
Also known as Ruby Red lithographer's tape, this semi-clear tape filters out light that can affect photo-sensitive film and equipment.
Outline and draw attention to safety zones and hazards with this tape.
Seal and mask rough surfaces such as concrete and stucco with this tape. The adhesive removes cleanly, even after long-term exposure to moisture and UV light.
Prepare joints and surfaces to ensure proper sealant adhesion.
Add ink to rollers and pads before stenciling.