Make your surface magnetic with this paint. It’s designed for use as an undercoat—cover with water-based paint. Apply with a brush, roller, or sprayer.

These sheets are made of rubber and iron oxide, letting you create a nonmetallic, nonmagnetic surface that magnets will stick to. Sheets can be cut with scissors to create custom shapes and sizes.

Make a magnetic writing surface for your workspace. Apply paint with a brush or roller; do not apply with a sprayer.

This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices. Apply with a brush, roller, or sprayer.

Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher. Apply with a brush, roller, or sprayer.

Restore existing water- and smoke-stained ceiling tiles to their original appearance.

New white provides a bright, new-tile look.

Old white matches older, aged white tiles.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals. Coatings may chalk with exposure to sunlight.

Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within. These thick coatings can also be used in chutes and on foundations for a smooth, glossy surface that resists abrasion, chemicals, and extreme temperatures once cured. Apply with a brush or roller. The size listed is the combined total of the two parts.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Rubber coatings withstand salt and acids. PVC plastic coatings can be used on nearly any surface, including rubber. They withstand salt, acids, alkalies, and gasoline. They also resist UV light, so they won’t lose their color when exposed to sunlight over long periods of time.

Coatings in a can can be dipped, brushed, or sprayed.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.

Apply gallon-sized water-based coatings with a roller.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures. Coatings resist acids, alkalies, fuels, and solvents, as well as temperatures as low as -40° F once cured. They can also be used as an adhesive for Viton® gaskets, O-rings, and seals.

Apply coatings in a bottle and can with a brush or roller. The size listed is the combined total of the two parts.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.

Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.

White coatings are frequently used on walls, ceilings, doors, and stairwells.

Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers, repelling liquid and grease without altering its appearance, feel, or smell.

Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.

Acrylic primer can be applied directly to metal. It resists corrosion, mold, and mildew. Apply with a brush, pad, roller, or sprayer.

Shellac primer seals in odors and has the best stain-blocking ability of any of the primers we offer. It also seals knots and sap in wood. Apply with a brush, roller, or sprayer.

For use in damp areas, these primers dry to a finish that prevents future stains caused by mold and mildew. Use them to cover existing stains and to extend the life of paint and coatings. Apply with a brush or roller.

Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint. Apply with a brush, roller, or sprayer.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound. Assortments include two 4" × 4" patches and a 6" × 6" patch. Patches are made of fiberglass-reinforced aluminum.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound. Patches are made of fiberglass-reinforced aluminum.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.