Container Type Container Type |
|---|
 |  |
| Aerosol Can | Can |
 |  |
| Bottle | Jug |
 | |
| Spray Bottle |
For Use On For Use On | Show |
|---|
|
For Use On For Use On | Hide |
|---|
Type Type |
|---|
|
Formulation Formulation |
|---|
|
Appearance Appearance |
|---|
|
Composition Composition |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Approximate Coverage @ Thickness Approximate Coverage@ Thickness |
|---|
|
Minimum Application Temperature Minimum ApplicationTemperature |
|---|
|
|
Maximum Application Temperature Maximum ApplicationTemperature |
|---|
|
Texture Texture |
|---|
|
Paint Type Paint Type |
|---|
|
Tip Size Tip Size |
|---|
 | Fine |
 | Medium |
 | Ultra Bold |
Form Form |
|---|
|
Container Material Container Material |
|---|
|
About Paint and Protective Coatings
More
About Paint and Ink Markers
Paint markers work well even on dirty, rusty, wet, and oily surfaces. They leave textured marks you can feel with your hand.
Ink markers work best on a clean, dry surface. Marks dry faster than paint and are smooth to the touch.
Both paint and ink markers are permanent.
More
About Structural Adhesives
More
Air Brush Paint
Unlike paint that must be diluted, this paint comes ready for use with an air brush. Its water-based formula can be cleaned up with soap and water, so air brushes are easy to keep clean.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, oz. | Composition | Formulation | Touch, min. | O'all, hrs. | Approx. Coverage @ Thick. | For Use Outdoors | For Use On | Choose a Color (Appearance) | Each | |
| 1 | Water Based | Acrylic | 20 | 24 | 2 sq. ft. @ 1 mil | Yes | Fabric | 000000 | 00000 | |
Protective Coatings
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Rubber coatings withstand salt and acids. Although primer is not required for use on all materials, it can be used to prepare any surface to maximize the life of the coating. Apply topcoat to give coated surfaces a glossy finish that resists fading.
PVC plastic coatings can be used on nearly any surface, including rubber. They withstand salt, acids, alkalies, and gasoline. They also resist UV light, so they won’t lose their color when exposed to sunlight over long periods of time.
Protective Coatings | Topcoats | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dry Time | Each | Primers | Each | ||||||||||||
| Container Size | Composition | Touch, min. | O'all | Approximate Coverage @ Thickness | For Use On | Primer Required For Use On | Choose a Color (Appearance) | 1-5 | 6-Up | Each | 1-5 | 6-Up | |||
Rubber—Aerosol Can | |||||||||||||||
| 11 oz. | Solvent Based | 40 | 24 hrs. | 6 sq. ft. @ 5 mil | Steel, Iron, Plastic, Wood, Fabric | Steel, Iron | 000000 | 00000 | 00000 | 0000000 | 000000 | 000000 | 000000 | 000000 | |
| Each | 1-5 | 6-Up | |||||||||||||
Rubber—Can | |||||||||||||||
| 14.5 oz. | Solvent Based | 40 | 24 hrs. | 10 sq. ft. @ 5 mil | Steel, Iron, Plastic, Wood, Fabric | Steel, Iron | 000000 | 00000 | 00 | 0000000 | 00000 | 000000 | 00000 | 00000 | |
Coatings for Fabric
Repel spills and block stains without changing the look of fabric or upholstery.
Dry Time | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model Name | Container Size, oz. | Composition | Touch, hrs. | Overall, hrs. | Max. Temp., °F | For Use On | Color | Each | |
3M Coatings | |||||||||
| Scotchgard | 10 | Solvent Based | 6 | 24 | 100° | Fabric | Clear | 00000000 | 000000 |
UV-Resistant Coatings for Fabric
Stop fabric from fading in the sun. These coatings also protect against spots, spills, and stains.
Container | Dry Time | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Composition | Approx. Coverage, sq. ft. | Touch, hrs. | Overall, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Includes | Color | Each | |
| 32 oz. | Spray Bottle | Solvent Based | 375 | 4 | 72 | 120° | 60° to 110° | Fabric | Trigger Sprayer | Clear | 00000000 | 000000 |
| 1 gal. | Jug | Solvent Based | 1,500 | 4 | 72 | 120° | 60° to 110° | Fabric | __ | Clear | 00000000 | 00000 |
Large-Capacity Fabric Paint Markers
These long-life markers hold twice as much paint as our other fabric paint markers. They write on cotton, wool, synthetic blends, and other fabrics with a pigment-based paint that won’t come off in laundering. They also work well even on dirty, rusty, and oily surfaces.
Fabric Paint Markers
Write on cotton, wool, synthetic blends, and other fabrics with a pigment-based paint that won’t come off in laundering. These paint markers also work well even on dirty, rusty, and oily surfaces.
Glow-in-the-Dark Paint Crayons
Paint stores energy from exposure to light to create luminescent marks you can see in the dark. These paint crayons work well even on dirty, rusty, and oily surfaces.
| Stroke Wd., mm | Drying Time, min. | For Use On | Application Temp. Range, °F | Color | Each | |
Ultra Bold | ||||||
|---|---|---|---|---|---|---|
| 13 | 10 | Ceramic, Fabric, Glass, Metal, Plastic, Wood | 20° to 240° | Fluorescent Yellow | 000000 | 000000 |
Smoothing and Protective Coatings for 3D-Printed Plastics
Unlike other processes that remove surface ridges on 3D-printed parts, these coatings hide them for a smooth, glossy, heat- and impact-resistant finish. Mix this two-part coating and apply it to your parts—a small amount will cover a lot. The coating spreads uniformly without leaving stroke marks, making parts smooth enough to use as a mold, or they can be sanded, primed, or painted for further finishing work.
To add color to your parts without the extra step of painting, stir a few drops of UV-resistant pigments (sold separately) into your coating mixture. The pigments are UV-stable, which keeps the color from fading, warping, or cracking when exposed to sunlight.
Container | Dry Time | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Material | Form | Composition | Touch, min. | O'all, hrs. | Approximate Coverage @ Thickness | Mixing Ratio | Max. Temp. | Application Temp. | For Use Outdoors | For Use On | Color (Appearance) | Each | |
| 6.4 | Bottle | Plastic | Liquid | Solvent Based | 10 | 4 | 4 sq. ft. @ 0.02" | 2:1 | 49° C 120° F | 18° to 60° C 64° to 140° F | No | ABS Plastic, Cardboard, EPDM Rubber, Fabric, Paper, PLA, Plaster, Polystyrene Plastic, Urethane Foam, Wood | Clear (Gloss) | 000000 | 000000 |
| 24 | Bottle | Plastic | Liquid | Solvent Based | 10 | 4 | 15 sq. ft. @ 0.02" | 2:1 | 49° C 120° F | 18° to 60° C 64° to 140° F | No | ABS Plastic, Cardboard, EPDM Rubber, Fabric, Paper, PLA, Plaster, Polystyrene Plastic, Urethane Foam, Wood | Clear (Gloss) | 000000 | 00000 |
2oz. Squeeze Bottle | 16oz. Bottle | ||||||
|---|---|---|---|---|---|---|---|
| Color | Material | Container Material | Form | Each | Each | ||
| Black | Urethane | Plastic | Liquid | 0000000 | 000000 | 0000000 | 000000 |
| Blue | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 00000 |
| Brown | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 00000 |
| Green | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 00000 |
| Orange | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 000000 |
| Red | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 000000 |
| White | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 00000 |
| Yellow | Urethane | Plastic | Liquid | 0000000 | 00000 | 0000000 | 00000 |
Spray Adhesives for Viton® Fluoroelastomer Rubber
Splice rubber O-rings and other gaskets with this chemical resistant adhesive.
| Container Size, oz. | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear Strength, lbs./sq. in. | Temp. Range, °F | Color | For Joining | Each | |
| 12 | 19 sq. ft. @ 2.5 gm/ft² | 5 sec. | 48 hrs. | 150 | -40° to 400° | Black | Ceramic, Fabric, Metal, Rubber, Wood | 000000 | 000000 |