Filter by
Container Type
Color
For Use On
Type
Formulation
Consistency
Begins to Harden
Clarity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Minimum Temperature
REACH
Reaches Full Strength
RoHS
Approximate Coverage @ Thickness
Spray Position
Container Net Weight
Mixing Required
Maximum Temperature
For Use Outdoors
Aerosol Surface Fillers for Plastic
Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon. Surface fillers are clear when dry. They cannot be sold to Canada due to local chemical regulations.
Match the appearance of the surface filler to your part. Satin reflects the most light and seems to shine. Matte reflects almost no light and appears dull. Eggshell reflects some light but is duller than satin.
| Appearance | Container Net Weight, oz. | Spray Position | Begins to Harden, min. | Reaches Full Strength, min. | Consistency | Approximate Coverage @ Thick. | Max. Thick., mil | For Use Outdoors | Temp. Range, °F | Color | For Use On | Cannot Be Sold To | Each | |
| Satin | 16 | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | Canada | 0000000 | 000000 |
| Matte | 16 | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | Canada | 0000000 | 00000 |
| Eggshell | 16 | Upright | 5 | 60 | Thin Liquid | 15 sq. ft. @ 1 mil | 1 | No | 45° to 100° | Clear | Polystyrene Plastic, ABS Plastic, Glass-Filled Nylon | Canada | 0000000 | 00000 |