Use this low-VOC paint in enclosed spaces to stop rust from starting and prevent existing rust from spreading.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.

Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.

This paint is formulated for use in enclosed spaces.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Make your surface magnetic with this paint.

Make items stand out under emergency lighting or in low-light environments.

Create a washable writing surface.

Highly abrasion resistant, use this paint in high-traffic areas. It’s good for marking traffic lanes, parking lots, and factory floors.

This chalk disappears in approximately 15 days when exposed to water, traffic, or abrasion.

Restore existing water- and smoke-stained ceiling tiles to their original appearance.

This paint provides bright visual identification at a distance, yet it will not soak into wood.

Touch-up nicks and scratches on wood.

Marks made with this paint fade naturally in approximately 30 days. It is water based and will not harm grass or other plant life.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.

Seal out moisture on scratched painted metal.

Protect brass, bronze, copper, and silver from moisture, chemicals, oxidation, and abrasion.

These zinc-rich coatings offer the protection of hot-dip galvanizing to keep iron and steel free of rust and corrosion.

Made with flakes of 316 stainless steel, these flexible silicone coatings have excellent durability and corrosion resistance. They withstand temperatures up to 1200° F for use on boilers, stacks, piping, and similar indoor applications.

For use with aluminum, brass, and copper parts, these kits create a flat, black protective finish that resists corrosion and reduces glare. Use as an alternative to purchasing black-oxide tools.

Use these dyes after anodizing and before sealing to add a decorative appearance.

Create your own zinc-plating system to add corrosion resistance to steel and iron parts.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These low-odor coatings form a waxy film similar to lube oil, so parts can remain coated for assembly. They can be removed with an alkaline cleaner.

These soft, pliable coatings add cushion and absorb shock. Use them to protect tools, dies, and other parts during shipping and storage. Once removed, coatings can be melted again for repeat use.

Protect tools, dies, and other parts during shipping and storage with these durable peel-away coatings. They resist abrasion, moisture, and corrosion. Once removed, coatings can be melted again for repeat use.

These coatings are used in enclosed, high-traffic spaces. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Able to withstand temperatures of up to 2500° F, these coatings absorb heat and release it later. Use them to improve the thermal efficiency of heaters, furnaces, and ovens to reduce energy costs. Also known as high-emissivity coatings.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

Also known as antifouling paint, the copper additive in these coatings prevents organic material, such as algae, barnacles, and slime from attaching to the surface. Use on boats, submerged structures, and inside tanks.

These coatings meet UL 723 and are rated Class A by ASTM E84—the highest rating available—for their ability to limit the spread of flames and generation of smoke. Use them in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

Spray these coatings on glass to create a clear, scratch-resistant surface that repels oil and water. They’re also known as oleophobic and hydrophobic coatings.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents.

Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

This potting compound is formulated for use in sensitive applications such as manufacturing semiconductors.

Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components.

These coatings require an ultraviolet curing lamp to reach full strength.

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics.

This coating is formulated for use in sensitive applications such as manufacturing semiconductors.

Seal rotting wood to prevent further damage while adding strength to the remaining wood fibers.

Repel spills and block stains without changing the look of fabric or upholstery.

These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone.

Also known as castor oil, use these to lubricate and preserve leather.

Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.

Use these coatings to form a water-resistant layer to restore and reinforce your roof.

Seal brick, mortar, and concrete to prevent water damage. These coatings create a thin, clear layer that sits on the surface of masonry and repels water.

Spray these coatings on grout to form a barrier against dirt, water, mildew, and discoloration.

Protect and revitalize asphalt surfaces with these tar-free coatings that form a weather- and water-resistant seal.

Minimize waste of paint and coatings—these sprayers produce less overspray than our other air-powered sprayers.

Replace the disposable spray heads on these guns after each use for the performance of a new spray gun without having to clean them. High-volume/low-pressure sprayers produce less overspray than other air-powered sprayers to minimize paint waste.

These tanks are built to ASME specifications. Use them with your paint sprayer for high-volume application of paint and coatings.

Aluminum cups are more durable than plastic cups. Keep extras ready for easy color changes while spraying.

These efficient hand-held sprayers produce low overspray, so they waste less paint than our other electric sprayers. Use them to spray thin paint, stains, and lacquers.

Spray paint and light coatings at twice the rate of our light duty electric paint sprayers. These sprayers are portable and have a lightweight spray gun for big projects.

Keep paint spray guns in good condition.