Polycarbonate Plastic Paint

Clear All

	For Use On For Use On	Show

Polycarbonate Plastic

	For Use On For Use On	Hide

Warning: Products have one, but not necessarily all, of the selected characteristics.

	Color Color

	Amber		Black
	Blue		Brown
	Clear		Gray
	Green		Off-White
	Red		Silver
	White		Yellow

	Container Type Container Type


Bottle	Can

Cartridge	Jar

Jug	Mixer Cup

Patch	Pen

Single-Use Packet	Stick

Syringe	Tube

	Maximum Temperature Maximum Temperature

Less than 250° F

250° to 499° F

500° to 999° F

	Reaches Full Strength Reaches Full Strength

	Consistency Consistency

	Formulation Formulation

	Begins to Harden Begins to Harden

	Mixing Required Mixing Required

Yes

	Type Type

Protective Coating

Primer

Surface Filler

	Container Size Container Size

	Manufacturer Manufacturer

Dow Corning

Loctite®

	Manufacturer Model Number Manufacturer Model Number

	Clarity Clarity

Clear

Semi-Clear

Opaque

	Minimum Temperature Minimum Temperature

	Finishing Method Finishing Method

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

	For Use Outdoors For Use Outdoors

Yes

	Specifications Met Specifications Met

ASTM

NSF/ANSI

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

	Width Width

12"

20"

	Maximum Thickness Maximum Thickness

1/4"

1/2"

Not Rated

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

41 Products

About Paint and Protective Coatings

About Sealant Flexibility

Encase electronic assemblies in a layer of urethane for protection from dust, moisture, chemicals, mechanical shock, and vibration. Urethanes withstand a wide range of temperatures and are the best choice for cold-temperature applications. They have excellent flexibility, good chemical and moisture resistance, and provide good electrical insulation. Use a gun (sold separately) with the included mixer nozzle to dispense.

US2350™ also require a 4:1 plunger (sold separately) to dispense.

			Dry Time
Mfr. Model No.	Container Size, fl. oz.	Consistency	Touch, min.	Overall, hrs.	Dielectric Strength, V/mil	Thermal Conductivity, W/m-K	Temp. Range, °F	For Use On	Color		Each
Loctite® Compounds—Medium Hard
US2350	1.69	Thick Liquid	90	24	950	0.51	-40° to 250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite	Black	0000000	000000
Loctite® Compounds—Soft
US2651	6.76	Thin Liquid	10	16	1,050	Not Rated	-85° to 250°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Ceramic, Glass, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, Polyimide Plastic, Garolite	Amber	0000000	00000

4:1 Plunger	00000000	Each	00000
Dispensing Gun for 1.69 fl. oz. Cartridges	00000000	Each	00000
Dispensing Gun for 6.76 fl. oz. Cartridges	0000000	Each	000000

Coolant-Resistant Surface Fillers

Repair small leaks and cracks in coolant systems for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems. Pour them into your coolant to fix both internal and external leaks. They contain ceramic microfibers and copper particles to create a permanent seal. They’re compatible with antifreeze and other coolant system additives.

Container
Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Temp. Range, °F	Color	For Use On		Each
16	Jug	7	10	Thick Liquid	Not Rated to 500°	Brown	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Galvanized Steel, Galvanized Iron, Titanium, Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, PTFE Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	000000

Surface Fillers

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces. The size listed is the combined total of the two parts.

	Container
Mfr. Model No.	Size	Net Weight	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On	Pkg. Qty.		Pkg.
Loctite® Fixmaster Epoxy
EA 445	__	0.12 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 445	__	1 oz.	Mixer Cup	5	12 hrs.	Thick Liquid	1:1	1 sq. in. @ 1/4"	-65° to 180°	Gray	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	000000
EA 9131	__	0.12 oz.	Mixer Cup	90	24 hrs.	Thick Liquid	1.5:1	1 sq. in. @ 1/4"	-65° to 180°	White	Machine, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Ceramic, Concrete, Glass, Wood	10	0000000	00000
															Each
Loctite® Fixmaster Poxy Pak™
EA 9017	0.8 fl. oz.	__	Syringe	5	60 min.	Thick Liquid	1:1	Not Rated	-65° to 300°	Clear	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, ABS Plastic, CPVC Plastic, PETG Plastic, Polycarbonate Plastic, Polyimide Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, PVDF Plastic, Concrete, Glass, Wood	__	0000000	00000

Surface Filler Patches

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

Surface Fillers
Lg.	Wd.	Begins to Harden, min.	Reaches Full Strength, hrs.	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
2"	12"	1	24	1:1	Yes	-85° to 220°	Red	Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	000000
2"	20"	1	24	1:1	Yes	-85° to 220°	Amber	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	6"	1	24	1:1	Yes	-85° to 220°	Blue	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000
4"	12"	1	24	1:1	Yes	-85° to 220°	Green	Machine, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Vinyl Plastic, EPDM Rubber, SBR Rubber, Fiberglass, Wood	00000000	00000

Light-Activated Surface Fillers

Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.

Epoxy fillers provide better adhesion and more corrosion resistance than polyester fillers.

	Container
Formulation	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, min.	Consistency	For Max. Crack Wd.	Approx. Coverage @ Thick.	Max. Thick.	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Polyester	3.5	Tube	1	3	Putty	1"	24 sq. in. @ 1/4"	1/2"	Yes	-40° to 220°	White	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	00000000	000000
Epoxy	3.5	Bottle	1	5	Putty	1"	24 sq. in. @ 1/4"	1/2"	Yes	-40° to 270°	Amber	Drill, Sand, Tap	Aluminum, Brass, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	00000000	00000

Water-Resistant Surface Fillers

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.

Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place.

Paste fillers resist alkalies, solvents, gasoline, and oil.

	Container
Mfr. Model No.	Size, fl. oz.	Net Weight, oz.	Type	Begins to Harden, min.	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Max. Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Loctite® Fixmaster Underwater Repair Epoxy
EA 9490	__	4	Stick	15	60 min.	Putty	__	16 sq. in. @ 1/4"	1/4"	Not Rated to 300°	White	Machine, Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood	0000000	000000
Surface Fillers
__	12	__	Jar	30	24 hrs.	Paste	1:1	85 sq. in. @ 1/4"	1"	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
__	24	__	Can	30	24 hrs.	Paste	1:1	170 sq. in. @ 1/4"	1"	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000
__	48	__	Can	30	24 hrs.	Paste	1:1	340 sq. in. @ 1/4"	1"	50° to 210°	White	Drill, Sand	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood	0000000	00000

Fuel-Resistant Surface Fillers

Also known as sloshing compounds, these two-part epoxies bond to rough and rusty surfaces in fuel tanks to repair leaks and prevent further corrosion. They withstand permanent immersion in fuel, oil, and harsh solvents. Use them with metal, plastic, and fiberglass tanks. Mix the smaller can with the bigger one and pour into your fuel tank. Rotate the tank to coat the interior and dump out any excess. Allow to cure overnight. Size listed is the combined total of the two parts.

1.5-pint container can treat a 10-gallon fuel tank. 3-pint container can treat a 20-gallon fuel tank.

Container
Size, pt.	Type	Begins to Harden, min.	Reaches Full Strength, hrs.	Consistency	Mix Ratio	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On		Each
1.5	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	000000
3	Can	5	24	Thick Liquid	2:1	No	70° to 90°	Amber	Drill, Sand, Tap	Aluminum, Brass, Bronze, Copper, Silver, Steel, Stainless Steel, Cast Iron, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Nylon Plastic, Polyethylene Plastic, Polypropylene Plastic, Vinyl Plastic, Fiberglass, Ceramic, Porcelain	0000000	00000

Conductive Surface Fillers for Electronics

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

Surface fillers in one-time-use packets and jars come as two parts. The size listed is the combined total of the two parts.

Volume resistivity and surface resistivity measure how well a material opposes the flow of electricity. The lower the rating, the more electricity it conducts.

Thermal conductivity measures a material’s ability to transfer heat. The higher the rating, the more heat it transfers.

	Container							Temp. Range, °F
Mfr. Model No.	Net Weight, oz.	Type	Begins to Harden	Reaches Full Strength	Thermal Conductivity, W/m-K	Volume Resistivity, ohms-cm	Mix Ratio	Min.	Max.	For Use On		Each
Loctite® Surface Fillers
3888	0.09	One-Time-Use Packet	90 min.	24 hrs.	1.44	0.001	100:6	-40°	170°	Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Polycarbonate Plastic	0000000	000000

Surface Fillers for Plastic

Use these two-part fillers to rebuild cracked or worn plastic surfaces. The size listed is the combined total of the two parts.

Surface fillers in a cartridge come with a mixer nozzle, but require a gun (sold separately) for dispensing. For best results, use a primer (sold separately).

Surface fillers in a stick have a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. Use with most rigid and semi-rigid types of plastic. They meet NSF/ANSI 61 for use with drinking water.

Container
Size	Net Weight	Type	Begins to Harden	Reaches Full Strength	Consistency	Mix Ratio	Approx. Coverage @ Thick.	Temp. Range, °F	Color	Finishing Method	For Use On		Each
Surface Fillers
__	4 oz.	Stick	20 min.	24 hrs.	Putty	__	16 sq. in. @ 1/4"	-40° to 250°	Off-White	Drill, Sand, Saw	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic	0000000	000000
1.7 fl. oz.	__	Cartridge	5 min.	30 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Gray	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000
1.7 fl. oz.	__	Cartridge	20 sec.	60 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Amber	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000
1.7 fl. oz.	__	Cartridge	50 sec.	60 min.	Thick Liquid	1:1	11 sq. in. @ 1/4"	-20° to 180°	Black	Sand	Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Polyethylene Plastic, Polypropylene Plastic	0000000	00000

Primer for Surface Fillers in a Cartridge	Each	000000
Replacement Mixer Nozzle for Surface Fillers in a Cartridge	Each	0000
Replacement Plunger for Surface Fillers in a Cartridge	Each	00000
Dispensing Gun for Surface Fillers in a Cartridge	Each	000000

Light-Activated Surface Filler Pens for Plastic

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure. Surface fillers work with most kinds of plastic, as well as wood, particleboard, and medium density fiberboard (MDF).

Pens

Formulation	Container Size, fl. oz.	Begins to Harden, sec.	Reaches Full Strength, sec.	Consistency	For Use Outdoors	Temp. Range, °F	Color	Finishing Method	For Use On	Batteries Included		Each
Acrylic	0.2	3	15	Gel	Yes	0° to 245°	Clear	Drill, Sand	Acrylic Plastic, Polystyrene Plastic, Polycarbonate Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, PVDF Plastic, Vinyl Plastic, Fiberglass, Wood	Yes	0000000	000000

Refill Cartridges

Formulation	Color	Clarity	Consistency	Container Size, fl. oz.		Each
Acrylic	Black	Opaque	Gel	0.2	0000000	000000
Acrylic	Clear	Clear	Gel	0.2	0000000	00000
Acrylic	Dark Brown	Opaque	Gel	0.2	0000000	00000
Acrylic	Light Brown	Opaque	Gel	0.2	0000000	00000
Acrylic	White	Opaque	Gel	0.2	0000000	00000

Sealant Primers

Prepare joints and surfaces to ensure proper sealant adhesion.

	Container
Mfr. Model No.	Size	Type	Drying Time	Color	For Use On		Each
3M Primers
P591	8.5 fl. oz.	Bottle	15 min.	Black	Aluminum, Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS Plastic, Acrylic Plastic, Polycarbonate Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, Concrete, Glass, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood, Iron, Galvanized Iron	0000000	000000
Dow Corning Primers
P5200	12 fl. oz.	Bottle	2 hrs.	Clear	Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS Plastic, Polycarbonate Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, Glass, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, EPDM Rubber, SBR Rubber, Ceramic, Masonry, Wood, Iron, Silicone Rubber, Galvanized Iron	0000000	00000
PR-1200	16 fl. oz.	Bottle	2 hrs.	Red	Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel, Titanium, Cast Iron, Galvanized Steel, ABS Plastic, Polycarbonate Plastic, Polystyrene Plastic, Polyurethane Rubber, PVC Plastic, Glass, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, EPDM Rubber, SBR Rubber, Ceramic, Masonry, Wood, Iron, Silicone Rubber, Galvanized Iron	0000000	00000
PR-1205	12.3 fl. oz.	Bottle	2 hrs.	Yellow	Aluminum, Stainless Steel, Steel, Cast Iron, Galvanized Steel, ABS Plastic, Polycarbonate Plastic, Polystyrene Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Ceramic, Iron, Galvanized Iron	0000000	00000

Email Us