For Use On For Use On | Show |
---|
|
For Use On For Use On | Hide |
---|
Color Color |
---|
Tip Size Tip Size |
---|
![]() | Fine |
![]() | Medium |
![]() | Bold |
![]() | Extra Bold |
![]() | Ultra Bold |
Composition Composition |
---|
|
Tip Type Tip Type |
---|
|
Appearance Appearance |
---|
|
Formulation Formulation |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Touch Dry Time Touch Dry Time |
---|
|
|
|
Type Type |
---|
|
Maximum Application Temperature Maximum ApplicationTemperature |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Minimum Application Temperature Minimum ApplicationTemperature |
---|
|
|
Begins to Harden Begins to Harden |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Container Size Container Size |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Paint and Protective Coatings
More
About Paint and Ink Markers
Paint markers work well even on dirty, rusty, wet, and oily surfaces. They leave textured marks you can feel with your hand.
Ink markers work best on a clean, dry surface. Marks dry faster than paint and are smooth to the touch.
Both paint and ink markers are permanent.
More
About Structural Adhesives
More
Magnet-Receptive Sheets



These sheets are made of rubber and iron oxide, letting you create a nonmetallic, nonmagnetic surface that magnets will stick to. Sheets can be cut with scissors to create custom shapes and sizes.
Thick. | Wd. | Thick. Tolerance | Wd. Tolerance | Temp. Range, °F | Material | Bonded With | Color | For Use On | Max. Continuous Lg., ft. | Per Ft. | |
Sheets | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
0.03" | 24 3/8" | -0.002" to 0.002" | -0.03" to 0.03" | 0° to 160° | Iron Oxide | Rubber | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | 50 | 0000000 | 00000 |
Vinyl-Faced Sheets | |||||||||||
0.03" | 24 3/8" | -0.002" to 0.002" | -0.03" to 0.03" | 0° to 160° | Iron Oxide | Rubber | White | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | 50 | 0000000 | 0000 |
Adhesive-Back Sheets | |||||||||||
0.03" | 24 3/8" | -0.002" to 0.002" | -0.03" to 0.03" | 0° to 160° | Iron Oxide | Rubber | Black | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | 50 | 0000000 | 0000 |
Impact-Resistant Polyurethane Coatings
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Primers cannot be sold to Canada due to regulatory limits on VOCs (volatile organic compounds).

Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, min. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Primer Required For Use On | Color (Appearance) | Each | |
14 | Solvent Based | 24 | 24 | 3 sq. ft. @ 50 mil | 4:1 | 45 | 180° | 65° to 85° | Steel, Iron, Plastic, Rubber, Composites, Fiberglass, Concrete, Wood | Steel, Iron, Plastic, Rubber, Composites, Fiberglass, Concrete, Wood | Black (Gloss) | 0000000 | 0000000 |
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Composition | Touch, min. | O'all, min. | Approximate Coverage @ Thickness | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Cannot Be Sold To | Each | |
4 | Solvent Based | 30 | 30 | 10 sq. ft. @ 50 mil | 170° | 25° to 170° | Steel, Iron | Blue (Gloss) | Canada | 0000000 | 000000 |
4 | Solvent Based | 30 | 30 | 10 sq. ft. @ 50 mil | 195° | 55° to 195° | Plastic, Rubber, Composites, Concrete, Wood, Fiberglass | Orange (Gloss) | Canada | 0000000 | 00000 |
Protective Coatings

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Coatings in a can can be dipped, brushed, or sprayed.
Container | Dry Time | |||||||
---|---|---|---|---|---|---|---|---|
Size | Composition | Touch, min. | O'all | Approximate Coverage @ Thickness | For Use On | Color (Appearance) | Each | |
PVC Plastic—Can | ||||||||
1 gal. | Solvent Based | 30 | 24 hrs. | 60 sq. ft. @ 5 mil | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Black (Semi-Gloss) | 00000000 | 0000000 |
1 gal. | Solvent Based | 30 | 24 hrs. | 60 sq. ft. @ 5 mil | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Red (Semi-Gloss) | 00000000 | 000000 |
1 gal. | Solvent Based | 30 | 24 hrs. | 60 sq. ft. @ 5 mil | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Yellow (Semi-Gloss) | 00000000 | 000000 |
Flexible Chemical-Resistant Coatings


Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures. Coatings resist acids, alkalies, fuels, and solvents, as well as temperatures as low as -40° F once cured. They can also be used as an adhesive for Viton® gaskets, O-rings, and seals.
Apply coatings in a bottle and can with a brush or roller. The size listed is the combined total of the two parts.
Container | Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, qt. | Net Weight, oz. | Composition | Touch, min. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
Viton® Fluoroelastomer—Aerosol Can | |||||||||||||
__ | 12 | Solvent Based | 10 | 24 | 13 sq. ft. @ 1 mil | __ | __ | 400° | 60° to 90° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Black (Flat) | 000000 | 000000 |
Viton® Fluoroelastomer—Bottle and Can | |||||||||||||
1 | __ | Solvent Based | 10 | 24 | 70 sq. ft. @ 1 mil | 27:1 | 8 | 400° | 40° to 90° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Black (Flat) | 000000 | 000000 |
Antislip Coatings


Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
Water-based epoxy coatings are clear and can be applied over nearly any surface, even old coatings, without altering their appearance. These two-part coatings come with a mixer that attaches to a hand-held drill and a roller cover to apply them once mixed. The size listed is the combined total of the two parts.
Apply gallon-sized water-based coatings with a roller. Coatings that comply with OSHA 29 CFR 1910.22 meet requirements for walking-working surfaces.
Container | Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Composition | Touch | O'all | Approx. Coverage @ Thick. | Mix Ratio | Application Time After Mixing, min. | Specifications Met | For Use On | Includes | Color (Appearance) | Each | |
Epoxy—Can | ||||||||||||
1 | Water Based | 27 min. | 30 min. | 185 sq. ft. @ 38 mil | 4:1 | 25 | OSHA Compliant 29 CFR 1910.22 | Aluminum, Brass, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall | Mixer, Roller Cover | Clear (Gloss) | 0000000 | 0000000 |
Roller Cover for Solvent-Based Coatings | 0000000 | Each | 00000 |
Flame-Retardant Coatings

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry. Apply with a brush, roller, or sprayer. The size listed is the combined total of the two parts.
Clear coatings are frequently used on wood—use one coat on sealed wood and two on unsealed. They can be used outside without breaking down, but prolonged exposure to UV light may cause them to yellow.
White coatings are frequently used on walls, ceilings, doors, and stairwells.
Dry Time | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Touch, hrs. | O'all, hrs. | Approximate Coverage @ Thickness | Mix Ratio | Application Time After Mixing, hrs. | Max. Temp., °F | Application Temp. Range, °F | Flammability Rating | For Use On | Color (Appearance) | Each | |
Epoxy | |||||||||||||
1 | Water Based | 8 | 48 | 150 sq. ft. @ 10 mil | 100:26 | 2.5 | 250° | 40° to 100° | UL 94 V-0 | Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | Clear (Gloss) | 000000 | 0000000 |
1 | Water Based | 8 | 48 | 150 sq. ft. @ 10 mil | 100:20 | 2.5 | 300° | 40° to 100° | UL 94 V-0 | Aluminum, Copper, Steel, Stainless Steel, Galvanized Iron, Galvanized Steel, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass, Masonry, Concrete, Stone, Asphalt, Drywall, Wood | White (Gloss) | 000000 | 000000 |
Ready-to-Use Silicone Potting Compounds


No mixing required --these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing).
Potting compounds that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).
Container | Dry Time | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Consistency | Touch | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Clarity | Color | Cannot Be Sold To | Each | |
Dow Corning Compounds—Medium Soft | |||||||||||||||
738 | 3 | Tube | Paste | 90 min. | 24 | 475 | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, MIL-A-46146, UL 94 HB | Aluminum, Copper, Steel, Plastic, Rubber, Fiberglass | Opaque | White | __ | 0000000 | 000000 |
738 | 10 1/10 | Cartridge | Paste | 90 min. | 24 | 475 | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, MIL-A-46146, UL 94 HB | Aluminum, Copper, Steel, Plastic, Rubber, Fiberglass | Opaque | White | __ | 0000000 | 00000 |
Dow Corning Compounds—Soft | |||||||||||||||
748 | 3 | Tube | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Opaque | Off-White | __ | 000000000 | 00000 |
748 | 10 1/10 | Cartridge | Paste | 30 min. | 24 | 475 | Not Rated | -65° to 350° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Glass | Opaque | Off-White | __ | 000000000 | 00000 |
838 | 3 | Tube | Paste | 45 min. | 24 | Not Rated | Not Rated | -45° to 390° | UL Listed, UL Recognized Component, UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Opaque | White | __ | 0000000 | 00000 |
839 | 10.3 | Cartridge | Paste | 35 min. | 24 | Not Rated | Not Rated | -45° to 390° | __ | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Titanium, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Semi-Clear | Blue | __ | 0000000 | 00000 |
Momentive/GE Compounds—Soft | |||||||||||||||
RTV162 | 2 4/5 | Tube | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | UL Recognized Component, MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | Opaque | White | CA | 00000000 | 00000 |
RTV162 | 10 1/10 | Cartridge | Paste | 4 hrs. | 48 | 450 | 0.2 | -75° to 400° | UL Recognized Component, MIL-A-46146 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Ceramic, Glass | Opaque | White | CA | 00000000 | 00000 |
Optically Clear Epoxy Potting Compounds

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics. Use them to encase electronic assemblies for protection from dust, chemicals, moisture, mechanical shock, and vibration. Rigid and wear resistant, epoxies are the strongest of the potting compounds. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
Optically Clear Epoxy Potting Compounds—Extra Hard | ||||||||||
1.7 | Thick Liquid | 40 | 24 | 229 | 0.45 | -65° to 275° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Amber | 0000000 | 000000 |
Two-Part Adhesive Dispensing Guns | |||
---|---|---|---|
Dispensing Gun for 1.7 fl. oz. Cartridges | 00000000 | Each | 000000 |
Epoxy Potting Compounds


Encase electronic assemblies in a layer of epoxy for protection from dust, chemicals, moisture, mechanical shock, and vibration. The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation. All require a mixer nozzle and gun to dispense.
Dry Time | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Container Size, fl. oz. | Consistency | Touch | Overall | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | Specifications Met | For Use On | Choose a Color | Each | |
3M Compounds—Extra Hard | ||||||||||||
DP270 | 1.64 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 000000 | |
DP270 | 6.8 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | 00000000 | 00000 | |
DP270 | 13.5 | Thick Liquid | 3 hrs. | 48 hrs. | 850 | 0.18 | -65° to 210° | UL 94 HB | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Plastic, Rubber, Glass | Black | 00000000 | 000000 |
Dispensing Gun for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 0000000 |
Mixer Nozzle for 6.8 fl. oz. 3M Cartridges | 0000000 | Each | 0000 |
Mixer Nozzle for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges (Mixing Elements: 16) | 0000000 | Each | 0000 |
Dispensing Gun for 1.64 fl. oz. and 1.69 fl. oz. 3M Cartridges | 0000000 | Each | 000000 |
Mixer Nozzle for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 0000 |
Dispensing Gun for 13.5 fl. oz. 3M Cartridges | 00000000 | Each | 000000 |
Mixer Nozzle for 1.64 fl. oz. 3M Cartridges | 0000000 | Each | 0000 |
Heavy Duty Heat-Transfer Coatings for Electronics

This thermally conductive coating keeps electrical components cool by dissipating heat. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
0.8 | Paste | 5 | 12 | 678 | 0.76 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass | White | 0000000 | 000000 |
Heavy Duty Precise-Gap Heat-Transfer Coatings for Electronics

To effectively dissipate heat in the tightest spaces, this coating contains a filler that acts like a shim to produce a consistent 0.005" to 0.006" gap between components. Use it to bond transformers, transistors, and other heat-generating components to printed circuit boards and heat sinks.
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, min. | Overall, hrs. | Dielectric Strength, V/mil | Thermal Conductivity, W/m-K | Temp. Range, °F | For Use On | Color | Each | |
0.8 | Paste | 5 | 24 | 678 | 0.808 | -65° to 300° | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass | Blue | 0000000 | 000000 |
Heavy Duty Optically Clear Light-Activated Coatings for Electronics

Clear enough to read through, this coating allows optimal light transmission for use with LEDs, solar cells, and fiber optics. Thinner than potting compounds, it flows easily into small spaces between electrical components. The coating requires an ultraviolet curing lamp to reach full strength. Dispense with a gun (sold separately).
Dry Time | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Container Size, fl. oz. | Consistency | Touch, sec. | Overall, hrs. | Hardness Rating | Temp. Range, °F | Light Intensity Requirements to Reach Full Strength | For Use On | Color | Each | |
0.8 | Thick Liquid | 10 | 24 | Extra Hard | -65° to 300° | 15 seconds @ 100 mW/cm2 | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Iron, Silver, Plastic, Rubber, Composites, Fiberglass, Ceramic, Glass | Clear | 0000000 | 0000000 |
Dispensing Guns for Syringes | 0000000 | Each | 000000 |
Coatings for Textiles

These silicone-based coatings renew leather and vinyl surfaces and protect against UV damage, dirt, and ozone. Spray them on, allow them to sink in, and buff away excess with a cloth.
Dry Time | Each | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, qt. | Composition | Approx. Coverage, sq. ft. | Touch, min. | Overall, min. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Includes | Color | 1-11 | 12-Up | |
1 | Solvent Based | 1,000 | 1 | 1 | 95° | 45° to 95° | Leather, Plastic, Rubber, Vinyl Fabric | Trigger Sprayer | White | 000000 | 000000 | 000000 |
Reflective Acrylic Coatings for Roofs


Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal. Apply to a dry surface with a brush, roller, or sprayer.
Primer (sold separately) extends the life of the coating. It’s required for use on bare rubberized and aged asphalt roofs.
Dry Time | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Container Size, gal. | Composition | Surface Reflectivity | Touch, hrs. | Overall | Approx. Coverage, sq. ft. | Application Temp. Range, °F | For Use On | Primer Required For Use On | Color | Each | |
0.9 | Water Based | 85% | 6 | 30 days | 70 | 50° to 70° | Steel, Iron, Rubber, Masonry, Concrete, Asphalt, Composites, Foam | Asphalt, Rubber | White | 0000000 | 000000 |
4.7 | Water Based | 85% | 6 | 30 days | 330 | 50° to 70° | Steel, Iron, Rubber, Masonry, Concrete, Asphalt, Composites, Foam | Asphalt, Rubber | White | 0000000 | 000000 |
Squeeze-On Paint Markers
Choose only the colors you need. You control the flow of paint with how hard you squeeze or press down. These paint markers work well even on dirty, rusty, and oily surfaces.














Tip | |||||||||
---|---|---|---|---|---|---|---|---|---|
Size | Shape | Stroke Wd., mm | For Use On | Container Size, fl. oz. | Drying Time, min. | Application Temp. Range, °F | Choose a Color | Each | |
Pen | |||||||||
Medium | Point | 1.4 | Ceramic, Glass, Leather, Metal, Plastic, Rubber, Wood | __ | 1 | -50° to 150° | 000000 | 00000 | |
Medium | Round | 2.3 | Ceramic, Glass, Leather, Metal, Plastic, Rubber, Wood | __ | 1 | -50° to 150° | 0000000 | 0000 | |
Tube | |||||||||
Bold | Round | 3 | Glass, Metal, Rubber, Wood | 1.7 | 20 | 0° to 150° | 000000 | 0000 |
Tip Shape | Stroke Wd., mm | Tip Size | For Color | Pkg. Qty. | Pkg. | |
Point | 1.4 | Medium | Black, Blue, Gold, Green, Red, Silver, White, Yellow, Fluorescent Orange, Fluorescent Red, Fluorescent Yellow | 2 | 0000000 | 00000 |
Round | 2.3 | Medium | Black, Blue, Gold, Green, Red, Silver, White, Yellow | 2 | 00000000 | 0000 |
Round | 2.3 | Medium | Fluorescent Orange, Fluorescent Red, Fluorescent Yellow | 2 | 00000000 | 0000 |
Paint Markers




Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
Reversible tip markers have a tip that’s bold on one end and extra-bold on the other. Remove and reinsert the tip to change the size.
Gold, silver, and fluorescent markers are highly visible, especially on dark surfaces.
Markers and replacement tips that cannot be sold to Canada are restricted due to export and/or product labeling requirements.
Markers | Replacement Tips | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Tip Size | Stroke Wd. | For Use On | Drying Time | Application Temp. Range | Features | Cannot Be Sold To | Choose a Color | Each | Pkg. Qty. | Pkg. | ||
Fine | 1 mm | Metal, Plastic, Rubber, Wood | 1 min. | -20° F to 150° F | __ | __ | 00000000 | 00000 | 2 | 00000000 | 00000 | |
Medium | 1.9 mm | Metal, Plastic, Rubber, Wood | 1 min. | -20° F to 150° F | __ | Canada | 000000 | 0000 | 10 | 000000 | 0000 | |
Medium | 1.9 mm | Metal, Plastic, Rubber, Wood | 1 min. | -20° F to 150° F | Pocket Clip | Canada | 000000 | 0000 | 12 | 0000000 | 0000 | |
Medium | 2.3 mm | Metal, Plastic, Rubber, Wood | 40 sec. | 20° F to 130° F | Pocket Clip | __ | Silver | 0000000 | 0000 | 12 | 00000000 | 0000 |
Bold | 4 mm | Metal, Plastic, Rubber, Wood | 2 min. | -20° F to 150° F | __ | __ | 00000000 | 0000 | 12 | 00000000 | 00000 | |
Bold/Extra Bold | 3 mm/5 mm | Metal, Plastic, Rubber, Wood | 1 min. | -20° F to 150° F | Pocket Clip, Reversible Tip | __ | 00000000 | 0000 | 12 | 00000000 | 0000 |
Paint Marker Sets


Includes a set of five colors. These paint markers work well even on dirty, rusty, and oily surfaces.
Reversible tip markers have a tip that’s bold on one end and extra-bold on the other. Remove and reinsert the tip to change the size.
Sets | Replacement Tips | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Tip Size | Stroke Wd. | For Use On | Drying Time, min. | Application Temp. Range, °F | Features | Includes | Each | Pkg. Qty. | Pkg. | ||
Bold | 4 mm | Metal, Plastic, Rubber, Wood | 2 | -20° to 150° | Pocket Clip | Five Markers (Black, Red, Silver, White, and Yellow) | 00000000 | 000000 | 12 | 00000000 | 000000 |
Bold/Extra Bold | 3 mm/5 mm | Metal, Plastic, Rubber, Wood | 1 | -20° to 150° | Pocket Clip, Reversible Tip | Five Markers (Black, Green, Red, White, and Yellow) | 00000000 | 00000 | 12 | 00000000 | 0000 |
Wet-Surface Paint Markers



Write on wet surfaces or underwater. These paint markers also work well even on dirty, rusty, and oily surfaces. They have fade- and chip-resistant paint.
Tip Size | Stroke Wd., mm | For Use On | Drying Time, min. | Application Temp. Range, °F | Choose a Color | Each | |
Fine | 1.2 | Glass, Metal, Plastic, Rubber, Wood | 45 | -20° to 150° | 00000000 | 00000 | |
Medium | 2.4 | Concrete, Glass, Metal, Plastic, Rubber, Wood | 45 | -20° to 150° | 00000000 | 0000 | |
Bold | 3.2 | Concrete, Glass, Metal, Plastic, Rubber, Wood | 35 | -20° to 150° | 0000000 | 0000 |
Large-Capacity Wet-Surface Paint Markers


These long-life markers hold twice as much paint as our other wet-surface paint markers. They write on wet surfaces or underwater and also work well even on dirty, rusty, and oily surfaces. These markers have fade- and chip-resistant paint. They cannot be sold to Canada due to product labeling requirements.
Paint Crayons with Holder

These crayons come in a tube that makes it easier to write and keeps the crayon from drying out. They work well even on dirty, rusty, and oily surfaces. They cannot be sold to Canada due to local chemical regulations.
Paint Crayons


These paint crayons work well even on dirty, rusty, and oily surfaces.
Optional holder makes it easier to write and keeps the crayon from drying out.
Stroke Wd., mm | Drying Time | For Use On | Application Temp. Range, °F | Environment | Choose a Color | Each | |
Ultra Bold | |||||||
---|---|---|---|---|---|---|---|
17 | 5 min. | Glass, Metal, Plastic, Rubber | -50° to 150° | __ | 0000000 | 00000 | |
17 | 16 hrs. | Glass, Metal, Plastic, Rubber | -50° to 150° | Wet Location | 0000000 | 0000 | |
17 | 24 hrs. | Glass, Metal, Plastic, Rubber | -50° to 150° | Wet Location | 0000000 | 0000 |
Optional Aluminum Holder | 0000000 | Each | 000000 |
Wax Crayons for Rubber


Write on wet and cold rubber with marks that won't smear or wash off with water, but can be wiped away with a dry cloth or sanding.
Optional holder makes it easier to write and prevents breakage.
Shoe and Boot Protective Epoxy Coatings

Extend the life of your footwear with these abrasion- and water-resistant epoxies. Stronger and more durable than most footwear materials, these epoxies are often used to coat and repair high-wear areas prone to rips, cracks, and water exposure, such as safety toes. They permanently bond to leather, plastic, and rubber. Each cartridge includes enough epoxy to coat the toes on one pair of shoes or boots. They fully harden in 24 hours and dry with a gloss finish, which can be rubbed away for a matte finish.
Surface-Preparation Cleaners

Often used to prepare parts for painting or powder coating, these water-based cleaners remove dirt, grease, metal residue, and mold-release lubricants. You can also use them to clean stainless steel prior to passivation. Free of fragrances and dyes, they rinse clean without leaving a residue. They contain corrosion inhibitors for long-lasting surface protection. Clean parts by soaking, scrubbing, or using a pressure washer.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Type | Size, gal. | Composition | Harshness | For Use On | For Removing | Features | Each | |
Liquid Concentrate | ||||||||
Jug | 5 | Water Based | Harsh | Ceramic, Fiberglass, Galvanized Steel, Iron, Plastic, Porcelain, Rubber, Stainless Steel, Steel | Dirt, Grease/Oil, Ink, Wax | Low Foaming | 0000000 | 0000000 |