We will reply to your message within an hour.
Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
Touch up scratches and wear on powder-coated metal without a primer. Choose the color that matches your equipment—this paint matches some of the most common colors used in powder-coating applications.
More durable and scratch resistant than liquid paint, use this dry paint with your powder coating system.
These coatings are NSF registered H1 for incidental food contact. Designed to protect food-processing equipment from corrosion after washdowns, use them to seal metal surfaces, resist moisture, and lubricate moving parts between processes.
Use these coatings on steel beams and pipes.
Also known as brushable ceramic, these coatings create a hard, low-friction surface. They're often used on liquid processing equipment to protect worn areas and reduce turbulence.
No mixing required—these potting compounds come ready to apply.
Clear enough to read through, this UV-resistant potting compound allows optimal light transmission for use with LEDs, solar cells, and fiber optics.
The strongest of the potting compounds, epoxies are rigid and wear resistant. They have excellent chemical and moisture resistance, withstand a wide range of temperatures, and provide excellent electrical insulation.
Formulated to draw heat away from sensitive electronic components, these potting compounds have higher thermal conductivity than standard potting compounds.
Shield circuit boards from flux, solder, conformal coatings, and high temperatures.
These coatings require an ultraviolet curing lamp to reach full strength.
This coating is formulated for use in sensitive applications such as manufacturing semiconductors.
Thinner than potting compounds, these rigid and wear-resistant coatings flow easily into small spaces between electrical components. Use them to secure and insulate hardware on printed circuit boards.
Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating.
Repair small leaks and cracks in coolant tanks for commercial vehicles and industrial equipment. These surface fillers meet ASTM D3147 for their ability to stop leaks in engine cooling systems.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.
Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.
Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.
These rubber-filled epoxies have excellent wear and impact resistance. Use them to repair and rebuild surfaces such as pump liners, hoppers, and vibrating feeders.
For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.
For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.
Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.
To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.
Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.
Stop leaks in metal tanks and equipment without draining the contents.
A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.
Prepare joints and surfaces to ensure proper sealant adhesion.
Prevent rust on parts and stored steel media.