We will reply to your message within an hour.
More
Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.
This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.
Cover scratches and wear on heavy equipment, such as tractors, excavators, and bulldozers.
Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.
This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.
Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.
Enhance, renew, and protect surfaces.
This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.
Make your surface magnetic with this paint.
Made of rubber and iron oxide, these sheets can be cut with scissors to create custom-shaped nonmetallic, nonmagnetic surface that magnets will stick to.
Create a washable writing surface.
Make items stand out under emergency lighting or in low-light environments.
Turn any surface into a dry-erase board.
Mark traffic lanes, parking lots, and factory floors.
Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.
This zero-VOC paint is for use in enclosed occupied areas, such as hospitals, schools, and offices.
Eliminate paint splatter clean-up—drops dry to a powder as they fall from ceilings 10 feet and higher.
Stain and seal in one application to protect and refresh the appearance of wood surfaces.
Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.
Touch-up nicks and scratches on wood.
These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.
Use these coatings on tanks to create a low-friction lining that prevents bubble formation and turbulence in the liquids within.
Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.
Designed for use on hoppers, chutes, and pumps, these coatings protect against impact and abrasion. Thicker than paint, they resist UV, moisture, and chemicals.
Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.
Protect surfaces against chemical fumes and splashes. These coatings resist acids, alkalies, and inorganic salts. They’re highly durable and have excellent adhesion.
Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.
Longer-lasting than antislip tape, these coatings contain grit to provide traction. They’re good for areas with pedestrian traffic.
These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.
These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.
Designed for use in areas with heavy vehicular traffic, these coatings are highly resistant to wear. They contain grit to provide traction to your surface.
Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.
Thicker than polyurethane and paint, these coatings have high moisture resistance and protect against abrasion and chemicals.
Tough and long-lasting, these flexible coatings protect against rust and corrosion.
Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.
These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.
These coatings are often used on castings, dies, and mirrors to prevent rust, abrasion, and moisture penetration.
Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.
Apply these wear-resistant coatings to wood to protect from scuffs, water, and oil damage.
Use these coatings on structural lumber, decking, and wood shingles.
Refinish porcelain sinks, tubs, and tile and give laminates a high-gloss finish.
Protect clothing, furniture, and other fabric with these oil- and water-repellent coatings. Also known as oleophobic and hydrophobic coatings, they work into a fabric’s individual fibers to repel liquid and grease.
Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.
Prepare metal surfaces for powder coating. These primers create a base layer that bonds with your top coat to extend the life of your powder coating.
Prepare metal, wood, and concrete for paint. Primers adhere to underlying surfaces to create a base layer that bonds well with paint for a long-lasting finish.
Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.
Cover stains from smoke, water, and ink to prevent them from bleeding through your topcoat, extending the life of paint and coatings.
These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.
These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.
Use this zero-VOC primer on drywall in enclosed occupied areas, such as hospitals, schools, and offices, to extend the life of paint.
These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.
Spray to fill in small dents, cracks, and scratches. These surface fillers build on themselves to cover minor surface imperfections.
Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.
Press these putty surface fillers in place to fill in holes, cracks, and dents. When exposed to sunlight or a UV lamp, they begin to harden immediately.
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.
Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.
Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.
Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.
Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.
Fill cracks with these coatings to stop leaks and deaden sound.
Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.
These patching compounds are the most flexible and watertight we offer.
Roll out a fast fix for leaky roofs and gutters with these peel-and-stick rolls.
Press these putty-like fillers into cracks in wood up to 1/8" wide.
Fix damaged wood or build up and replace missing wood.
Choose only the colors you need.
Includes a set of five colors.
Choose only the colors you need. These rich colors won’t fade in sunlight or exposure to weather.
Includes one black, blue, orange, red, white, and yellow marker.
These long-life markers hold twice as much paint as our other wet-surface paint markers.
Choose only the colors you need. These paint markers work well even on dirty, rusty, and oily surfaces.
These crayons come in a tube that makes it easier to write and keeps the crayon from drying out.
Paint stores energy from exposure to light to create luminescent marks you can see in the dark. Works on ceramic, fabric, glass, metal, plastic, and wood.
Write on glass, metal, paper, and wood.
Also known as lumber crayons, these work better on rough surfaces than our standard wax crayons. Use on concrete, metal, and wood.
Prepare joints and surfaces to ensure proper sealant adhesion.