For Use On For Use On |
|---|
Formulation Formulation |
|---|
|
|
For Joining For Joining |
|---|
|
Type Type |
|---|
|
Manufacturer Manufacturer |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Consistency Consistency |
|---|
|
About Sealant Flexibility
More
About Structural Adhesives
More
Sealants
These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Sealants that cannot be sold to California exceed local regulatory limits on VOC (volatile organic compounds).
Container | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Cannot Be Sold To | Choose a Color | Each | |
Sika Sikaflex Polyurethane | ||||||||||||||
| 201 | 10.1 | Cartridge | 3 hrs. | 3 days | 550% | -35% to 35% | 175 | Medium Soft (Durometer 38A) | -40° to 190° | Metal Wood | CA | 000000 | 000000 | |
| 221 | 10.1 | Cartridge | 60 min. | 3 days | 500% | -12.5% to 12.5% | 260 | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Plastic Plastic to Rubber Rubber Masonry | __ | 000000 | 00000 | |
| 227 | 10.1 | Cartridge | 40 min. | 3 days | 600% | -12.5% to 12.5% | 245 | Medium Soft (Durometer 40A) | -40° to 190° | Metal Metal to Plastic Metal to Rubber Plastic Rubber | CA | 000000 | 00000 | |
| Primer for Sika Sikaflex Polyurethane Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
All-Weather Application Sealants
Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Sealants that cannot be sold to the regions listed are restricted by local chemical regulations, including limits on VOC (volatile organic compounds).
Container | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Color | Cannot Be Sold To | 1-11 | 12-Up | |
Hybrid Polymer | |||||||||||||
| 10 | Cartridge | 1 sec. | 5 days | 870% | -25% to 25% | Soft (Durometer 20A) | -40° to 180° | Metal Masonry Wood | Clear | __ | 0000000 | 000000 | 000000 |
| 10 | Cartridge | 1 sec. | 5 days | 870% | -25% to 25% | Soft (Durometer 25A) | -40° to 180° | Metal Masonry Wood | White | CA, Canada | 0000000 | 00000 | 00000 |
Paintable Silicone Sealants
Unlike standard silicone sealants, this silicone sealant can be painted. It’s non-sagging, so it won't drip from vertical and overhead surfaces. This sealant is also known as RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Color | Each | |
Silicone | ||||||||||||
| 9 | Cartridge | 30 min. | 24 hrs. | 400% | -25% to 25% | 300 | Soft (Durometer 35A) | -40° to 176° | Metal Metal to Plastic Metal to Rubber Metal to Composites Plastic Plastic to Rubber Rubber Rubber to Composites Composites Masonry | White | 0000000 | 000000 |
Structural Sealants
These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. They’re non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Sika Sikaflex Polyurethane | ||||||||||||
| 252 | 10.1 | Cartridge | 40 min. | 3 days | 400% | Not Rated | Medium (Durometer 50A) | -40° to 190° | Metal Metal to Composites Composites Wood | 000000 | 000000 | |
| Primer for Sika Sikaflex Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
Submersible Sealants
These non-sagging sealants will not drip while hardening on vertical and overhead surfaces. They’re marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.
Sika Sikaflex sealants meet NSF/ANSI 61 safety standards for use with drinking water.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.
Container | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | Specifications Met | For Joining | Choose a Color | Each | |
Sika Sikaflex Polyurethane | |||||||||||||
| 291 | 10.1 | Cartridge | 60 min. | 3 days | 500% | -12.5% to 12.5% | Medium Soft (Durometer 40A) | -40° to 190° | NSF/ANSI 61 | Metal | 000000 | 000000 | |
| Primer for Sika Sikaflex Sealants (3.4-oz Bottle) | 0000000 | Each | 000000 |
UV-Resistant Glass Sealants
These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.
Container | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Sika Sikaflex Silicone | ||||||||||||
| 295 | 10.1 | Cartridge | 60 min. | 72 hrs. | 700% | -50% to 50% | Soft (Durometer 25A) | -40° to 190° | Plastic Plastic to Glass Rubber Rubber to Glass | 000000 | 000000 | |
Water-Resistant Surface Fillers
Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater. Use them to repair cracked, worn, and damaged surfaces. Size listed is the combined total of the two parts.
Putty fillers come in a stick with a resin on the outside and a hardener on the inside. Cut the desired amount from the sticks, knead to a uniform color to mix, and press into place. NSF/ANSI 61 surface fillers meet safety standards for use with drinking water.
Paste fillers resist alkalies, solvents, gasoline, and oil.
Container | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden, min. | Reaches Full Strength | Consistency | Mix Ratio | Approx. Coverage @ Thick. | Max. Thick. | For Use Outdoors | Temp. Range, °F | Color | Finishing Method | For Use On | Specifications Met | Each | |
Loctite® Fixmaster Metal Magic Steel | ||||||||||||||||
| EA 3463 | 4 | Stick | 3 | 24 hrs. | Putty | __ | 10 sq. in. @ 1/4" | 1" | Yes | -20° to 250° | Gray | Sand | Bronze, Copper, Steel, Stainless Steel, Cast Iron, Concrete | NSF/ANSI 61 | 0000000 | 000000 |
Loctite® Fixmaster Underwater Repair Epoxy | ||||||||||||||||
| EA 9490 | 4 | Stick | 15 | 60 min. | Putty | __ | 16 sq. in. @ 1/4" | 1/4" | Yes | Not Rated to 300° | White | Machine, Drill, Sand, Tap | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Concrete, Wood | __ | 0000000 | 00000 |
Surface Fillers | ||||||||||||||||
| __ | 2 | Tube | 5 | 24 hrs. | Paste | 1:1 | 12 sq. in. @ 1/4" | 1/2" | Yes | Not Rated to 200° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
| __ | 2 | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
| __ | 2 | Jar, Bottle | 20 | 60 min. | Paste | 5:1 | 8 1/2 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
| __ | 12 | Jar | 30 | 24 hrs. | Paste | 1:1 | 85 sq. in. @ 1/4" | 1" | Yes | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | __ | 0000000 | 00000 |
| __ | 14 | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 185° | White | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
| __ | 14 | Can, Jar | 20 | 60 min. | Paste | 5:1 | 62 sq. in. @ 1/4" | 1 1/2" | Yes | Not Rated to 250° | Gray | Machine, Drill, Sand, Saw, Tap | Aluminum, Brass, Bronze, Copper, Steel, Galvanized Iron, Galvanized Steel, Titanium, Acrylic Plastic, ABS Plastic, PVC Plastic, CPVC Plastic, Polyimide Plastic, Nylon Plastic, Vinyl Plastic, EPDM Rubber, Fiberglass, Glass, Concrete, Ceramic, Porcelain, Plaster, Grout, Masonry, Asphalt, Stone, Wood | __ | 0000000 | 00000 |
| __ | 24 | Can | 30 | 24 hrs. | Paste | 1:1 | 170 sq. in. @ 1/4" | 1" | Yes | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | __ | 0000000 | 00000 |
| __ | 48 | Can | 30 | 24 hrs. | Paste | 1:1 | 340 sq. in. @ 1/4" | 1" | Yes | 50° to 210° | White | Drill, Sand | Aluminum, Brass, Bronze, Copper, Steel, Stainless Steel, Cast Iron, Titanium, Polystyrene Plastic, Polycarbonate Plastic, Polyurethane Rubber, ABS Plastic, PVC Plastic, CPVC Plastic, PETG Plastic, PVDF Plastic, Polyimide Plastic, Fiberglass, Wood | __ | 0000000 | 00000 |
Water-Resistant Surface Filler Kits
Everything you need to repair cracked, worn, and damaged surfaces—even underwater.
| Includes | Formulation | Consistency | For Use Outdoors | Temp. Range, °F | Finishing Method | For Use On | Each | |
| 8 One-Time-Use Packets of 101-TS Two-Part Epoxy Filler 0.1-oz. 406 Collodial Silica Filler 0.1-oz. 410 Low-Density Filler Two Brushes Reusable Mixing Stick Three Mixing Cups 15" × 15" Fiberglass Cloth Syringe Dispenser Three Pairs of Disposable Gloves | Epoxy | Thin Liquid | Yes | 35° to 130° | Machine, Drill, Sand, Saw, Tap | Aluminum, Steel, Stainless Steel, ABS Plastic, PVC Plastic, Fiberglass, Wood | 0000000 | 000000 |
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Component | No. of Pieces | Mfr. Model No. | Size | Type | Lg. | Wd. | Each | |
| Two-Part Epoxy | 6 | 101-TS | 0.5 oz. | One-Time-Use Packet | __ | __ | 0000000 | 000000 |
| Resin | 1 | 105 | 1 qt. | Can | __ | __ | 0000000 | 00000 |
| Fast Hardener | 1 | 205 | 7 oz. | Can | __ | __ | 0000000 | 00000 |
| Slow Hardener | 1 | 206 | 7 oz. | Can | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 1.7 oz. | Canister | __ | __ | 0000000 | 00000 |
| Colloidal Silica Filler | 1 | 406 | 5.5 oz. | Canister | __ | __ | 0000000 | 00000 |
| Low-Density Filler | 1 | 410 | 5 oz. | Canister | __ | __ | 0000000 | 00000 |
| Mini Dispensing Pump | 3 | 300 | __ | __ | __ | __ | 0000000 | 00000 |
| Fiberglass Cloth | 1 | 745 | __ | __ | 30" | 30" | 0000000 | 00000 |
Urethane Structural Adhesives
Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.
The size listed is the combined total of the two parts. Dispense adhesives in 10.1 oz. cartridges with a standard caulk gun.
292i resists moisture and does not require mixing.
Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mfr. Model No. | Size, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| 292i | 10.1 | Cartridge | 40 min. | 72 hrs. | 290 | Not Rated | Paste (Not Rated) | -40° to 190° | White | Metal, Metal to Plastic, Metal to Rubber, Plastic, Plastic to Rubber, Rubber | 000000 | 000000 |