Maximum Capacity Maximum Capacity |
|---|
|
|
Lubrication Lubrication |
|---|
|
Finish Finish |
|---|
|
Specifications Met Specifications Met |
|---|
|
Duty Cycle Duty Cycle |
|---|
|
Positioning Turntables
Simplify tasks such as spray painting, repair work, and inspection with these turntables that rotate to expose every side of an object while working. Lubricated turntables provide smoother, quieter motion compared to similar turntables where lubrication is not required.
Styles C and G have sloped edges for easy loading and unloading.
For technical drawings and 3-D models, click on a part number.
Bearing | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Style | Capacity, lbs. | OD | ID | Overall Ht. | Material | Type | Material | Color | Each | |
Lubrication Not Required | ||||||||||
| F | 2,000 | 40" | 36 1/2" | 2" | Powder-Coated Steel | Roller | Steel | Blue | 0000000 | 0000000 |
| F | 4,000 | 40" | 36 1/2" | 2" | Powder-Coated Steel | Roller | Steel | Blue | 0000000 | 000000 |
| F | 6,000 | 40" | 36 1/2" | 2" | Powder-Coated Steel | Roller | Steel | Blue | 0000000 | 000000 |
Lubricated | ||||||||||
| G | 4,000 | 43 3/8" | __ | 7/8" | Painted Steel | Ball | Steel | Yellow | 000000 | 00000000 |
Air-Actuated Auto-Leveling Pallet Stands—Not for Lifting
These stands keep the top of your load at a convenient height; an air cylinder automatically returns the stand to your set height as you add or remove parts of your load. The turntable rotates 360° to reduce reaching. A maximum of 60 psi of air is needed for setup but not for operation. Adjust height before adding pallets. A three-position knob allows capacity adjustments while a relief valve prevents pressure build-up to provide overload protection. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
Air Inlet | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | Actuator Material | Pipe Size | Thread Type | Gender | Forklift Entry | Specifications Met | Each | |
| 250-4,000 | 43" | 49" | 24 3/8" | 10 1/2"-30 1/2" | Steel | Rubber | 1/4 | NPT | Female | Yes | ANSI MH 29.1 | 000000 | 000000000 |
Spring-Actuated Auto-Leveling
Pallet Stands—Not for Lifting
Use one to three springs (included) to automatically maintain a convenient ergonomic working height based on the load. A built-in damper provides smooth and gradual raising and lowering without bounce. The turntable rotates 360° to reduce reaching. The stand must be loaded to at least the minimum capacity for auto-leveling to engage.
Warning: Not for lifting. Never use to support people.
| Capacity, lbs. | Turntable Dia. | Lg. | Wd. | Ht. | Material | No. of Springs | Forklift Entry | Each | |
| 400-4,500 | 43 5/8" | 36 1/4" | 36 5/8" | 9 1/2"-27 1/2" | Steel | 3 | Yes | 0000000 | 000000000 |
Turntable-Top Electric Stationary Lift Tables
The turntable rotates to reduce reaching. Tables have an electric motor and a hydraulic pump that perform repetitive lifting and positioning with the push of a button. The NEMA rating only applies to the push-button control.
Lift table bellows (sold separately) protect the working parts of the table from dust, dirt, and debris.
Warning: Never use to lift people.
Lift Tables | Lift Table Bellows | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Ht. | Elevation Speed, in./sec. | Tabletop Ga. | Turntable Dia. | Material | Duty Cycle | Motor Full Load Current | Plug Type | Control Cord Lg., ft. | Specifications Met | Each | Each | ||
Round with 120V AC Motor | ||||||||||||||||
| 2,000 | __ | __ | 11 1/2"-41 1/2" | 1 1/4 | 11 | 43" | Steel | 9 cycles per hour | 14.5A | Three Prong | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 000000000 | 0000000 | 0000000 |
| 3,000 | __ | __ | 12"-45 1/2" | 1 1/4 | 11 | 43" | Steel | 9 cycles per hour | 14.5A | Three Prong | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |
Square with 120V AC Motor | ||||||||||||||||
| 3,500 | 48" | 48" | 8"-43 1/2" | 3/4 | 7 | 43" | Steel | 20 cycles per hour | 17A | Three Prong | 10 | ANSI MH 29.1, NEMA 1 | 0000000 | 00000000 | 0000000 | 000000 |