Made from 18-8 stainless steel, these metric pan head screws have good chemical resistance and may be mildly magnetic.

These metric 316 stainless steel screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They may be mildly magnetic.

Made to Japanese Industrial Standards, these screws have narrower and shorter heads than standard Phillips pan head screws.

A zinc plating makes these metric pan head screws corrosion resistant in wet environments.

Choose these screws for their adherence to strict military standards for material and construction.

Made from nylon, these metric pan head screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

Reliable in harsh environments up to 500° F, PEEK screws withstand acids, bases, and salt solutions. They are chemical and oil resistant, nonconductive, and lightweight.

Made from polycarbonate, these metric pan head screws resist breaking in high-impact applications. They are chemical and oil resistant, nonconductive, and lightweight.

Made from brass, these metric pan head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

The most corrosion-resistant pan head screws we offer, these metric titanium screws withstand salt water, acids, and chemicals. They have a high strength-to-weight ratio.

Good for use outdoors and in washdown environments, these metric 18-8 stainless steel screws are more corrosion resistant than steel and nearly as strong. Their pan-shaped head sits nearly flat on the fastened surface, so there’s no need to countersink a hole.

These metric 316 stainless steel pan head screws resist corrosion from chemicals and salt water better than 18-8 stainless steel screws. They may be mildly magnetic.

Install these metric pan head screws for a low-profile, finished look—no countersink required.

Made from nylon, these metric screws are chemical and oil resistant, nonconductive, and lightweight. Exposure to moisture may cause them to expand.

These metric PTFE screws withstand harsh chemicals and temperatures from -100° F to 500° F. They are nonconductive, lightweight, and resist wear due to their slippery surface.

Made from brass, these metric pan head screws are corrosion resistant in wet environments, nonmagnetic, and electrically conductive.

Made from 18-8 stainless steel, these screws have good chemical resistance and may be mildly magnetic. Torx and Torx-Plus drives have more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

These screws have a Torx or Torx-Plus drive for more points of contact than other drives, allowing you to tighten the screw without damaging the recess.

Create a decorative appearance on your finished product—the head of these screws is painted.

These metric 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic.

Made from stainless steel, these metric screws have good chemical resistance and may be mildly magnetic. The washer has sharp internal teeth that dig into surfaces to resist large amounts of vibration while the smooth outside edge provides a finished look. Also known as Sems screws, the washer rotates freely but is permanently attached.

These metric screws have a washer with sharp internal teeth that dig into surfaces to resist large amounts of vibration. The smooth outside edge of the washer provides a finished look. Also known as Sems screws, the washer rotates freely but is permanently attached.

These metric stainless steel screws have good chemical resistance and may be mildly magnetic. All have a washer with sharp external teeth that dig into surfaces for maximum holding power and vibration resistance. Also known as Sems screws, the washer rotates freely but is permanently attached.

These metric screws have a washer with sharp external teeth that dig into surfaces for maximum holding power and vibration resistance. Also known as Sems screws, the washer rotates freely but is permanently attached.

Made from stainless steel, these screws have good chemical resistance and may be mildly magnetic. A curved washer protects delicate surfaces while providing constant tension. Also known as Square Cone Sems screws, the washer rotates freely but is permanently attached.

As you tighten these metric screws, the split lock washer flattens to add tension and prevent loosening from small amounts of vibration. Also known as Sems screws, the washer rotates freely but is permanently attached.

Stainless steel screws have excellent corrosion resistance in most environments.

These metric screws have a nylon patch bonded to the threads that adds friction to prevent loosening from vibration. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

These metric screws have a drilled spanner drive, making them difficult to remove without special tools. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

These metric screws have a silicone O-ring that prevents leaks and seals out contaminants. Made from 18-8 stainless steel, they have good chemical resistance and may be mildly magnetic.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are available with corrosion-resistant finishes.

18-8 stainless steel screws have good chemical resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

Brass screws are corrosion resistant in wet environments and electrically conductive.

A Torx drive has more points of contact than Phillips, slotted, and square drives, allowing you to apply extra force with less slippage or damage to the recess.

Made from 18-8 stainless steel, these screws are chemical resistant.

The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.

A flange under the head distributes holding pressure and reduces the risk of crushing thin metal.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

Drill a pilot hole, cut threads, and fasten in one motion with these metric-threaded screws. Made of steel, they’re strong and wear resistant.

Made from stainless steel to resist galvanic corrosion, use these screws to fasten aluminum to aluminum and steel framing. They save you time and effort by drilling their own holes and fastening in a single operation.

Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.

The triangular shank presses tightly as it forms threads, so screws resist loosening in soft metals such as brass, aluminum, and copper.

These steel screws are zinc plated to resist corrosion in wet environments.

Threads change direction to cut into composites and push material back into the hole to prevent distorting the surface around the hole.

More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.

18-8 stainless steel screws have good chemical resistance.

These steel screws are zinc plated to resist corrosion in wet environments.

18-8 stainless steel screws have good chemical resistance.

These steel screws have alternating high and low threads to minimize cracking and splitting in brittle material such as phenolic and glass-filled plastic.

A point centers the screw in a starter hole and widely spaced threads reduce the risk of cracking plastic.

Attach metal framing to metal studs up to 0.036" thick.

These barrels and caps are corrosion resistant in wet environments.

Create strong joints in wood and wood composite.

Fasten sheet metal up to 0.200" thick.

Use these light duty anchors to hold 20 lbs. or less.