Install in soft material such as aluminum and low-carbon steel at least 0.036" thick with an arbor press or similar pressure tool.

The base flares out during installation, creating a backside flange in hard materials and near edges in panels up to 0.312" thick. Install with a flare-in installation tool and an arbor press.

These rounded head nuts can be riveted into thin panels for a flush fit. They can be mounted without spaces between the panels. A quarter-turn locks and releases access panels, doors, and covers.

These rounded head screws have a nut that clips onto the edge of a thin panel, allowing you to mount the screw near edges. A quarter-turn locks and releases access panels, doors, and covers.

Press these rounded head nuts into the backside of a panel in applications where you have access to both sides of the panel. A quarter-turn locks and releases access panels, doors, and covers.

Press these rounded head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

Install these socket head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Push the plunger to secure and pull to release for quick access.

These include a barrel and a screw.

Pair with a barrel you already have or couple with a different barrel to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

Designed with a shoulder for the strength to handle side and shear loads.

Use these hex drive screws and binding barrels as a low-profile alternative to standard nut and bolt combinations.

An unthreaded barrel allows quick assembly with a press or a hammer.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

Plastic binding barrels and caps are chemical resistant, nonconductive, and lightweight.

Create strong joints in wood and wood composite.

Install in a cutout to create a secure joint between boards, butcher blocks, and countertops.

Brass binding barrels and screws are corrosion resistant in wet environments and electrically conductive.

More corrosion resistant than 18-8 stainless steel binding barrels and screws, these have excellent resistance to chemicals and salt water.

Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.

These metric nuts have a barrel with multiple threads for secure thread engagement. Also known as U-style clip-on nuts.

Use these light-duty clip-on nuts in low-clearance applications.

A hex-shaped barrel allows these clip-on nuts to be gripped with a wrench to hold them in place when tightening a screw. They have multiple threads for more thread engagement than low-profile clip-on nuts.

These nuts firmly clip onto the edge of panels and stay secure.