Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.

These nuts have good chemical resistance and may be mildly magnetic.

A flat hex head sits flush against the material surface for use in low-clearance applications.

These press-fit nuts have a zinc plating for corrosion resistance in wet environments.

Also known as broach style captive nuts, these nuts have good chemical resistance and may be mildly magnetic.

Snap these nuts into square holes in thin materials.

These metric nuts have a barrel with multiple threads for secure thread engagement. Also known as U-style clip-on nuts.

Use these light-duty clip-on nuts in low-clearance applications.

A hex- or square-shaped barrel allows these clip-on nuts to be gripped with a wrench to hold them in place when tightening a screw. They have multiple threads for more thread engagement than low-profile clip-on nuts.

Use these light-duty clip-on nuts in low-clearance applications.

These nuts are often used to secure parts on electric consoles.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.

These kits include one size of low-profile rivet nuts.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites.

The thread area is enclosed, which prevents leakage past the threads from either side of your application.

The coated flange seals out moisture and prevents corrosion.

Install these socket head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Install these rounded head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Press these rounded head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

Press these wing head nuts into a closed-end hole or thick panel in applications where the back of the panel is inaccessible. A quarter-turn locks and releases access panels, doors, and covers.

These wing-head screws have a clip-on nut that allows you to mount them near the edge of a thin panel. Use them to lock and release access panels, doors, and covers with a quarter-turn.

Rivet these wing head nuts into thin panels for a flush fit. They can be mounted without space between panels. A quarter-turn locks and releases access panels, doors, and covers.

Install in soft material such as aluminum and low-carbon steel at least 0.036" thick with an arbor press or similar pressure tool.

The base flares out during installation, creating a backside flange in hard materials and near edges in panels up to 0.312" thick. Install with a flare-in installation tool and an arbor press.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Tapered prongs or a snap-in ring securely hold these plugs in place.

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

The wings on these plugs expand against the sides of a hole to lock them in place.

Vents in the top allow air circulation and permit heat and fumes to escape. All of these plugs have wings that expand against the sides of the hole to lock them in place.

These brackets come in one piece that can be cut-to-size with a hacksaw.

Interlock brackets to secure panels flush to flat surfaces.

Fit these brackets through drilled holes in panels.

Use four brackets to support the top and bottom edges of panels without drilling holes in them.

Seal unused holes and knockouts in enclosures and outlet boxes.

Sized for knockouts and conduit openings.

Close 2" square holes in the floor of your enclosure with these adhesive plugs.

Sized for 22 mm and 30 mm push-button holes.

Attach a cord grip to cable without removing connectors and rewiring. These cord grips have a two-piece design to fit around cables with connectors.