Fold the ring handle into the recess to stay out of the way when not in use.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

These latches have a spring-wire cam that slips under a receiving catch on a cabinet body to create tension and hold cabinet doors and drawers closed.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

With a finger-grip knob, these latches fit where latches with handles won't.

Also known as adjustable compression cam latches, these adjust to compensate for door or drawer misalignment.

These tight-hold latches are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

Raise the handle and it swings smoothly for easy latching and unlatching.

Designed for use in 1/2" dia. through holes.

Also known as compression cam latches, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam latches, these reach full compression when you lift the handle, turn it a quarter-turn, and then push it down for a secure hold.

These latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Use these locks in a 3/4" dia. through hole, which is the most common through-hole size.

Also known as adjustable compression cam locks, these adjust to compensate for door or drawer misalignment.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

Designed for use in 1/2" dia. through holes.

Meet U.S. postal service guidelines for mailbox locks.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Designed for use in 1/2" dia. through holes.

Made of plastic, these locks are suitable for damp and humid environments.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

These highly pick-resistant locks have specially designed half-moon keys that cannot be duplicated.

These locks open with their own unique key as well as a master key.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

A red indicator on the lock face is visible when unlocked and hidden when locked.

Also known as compression cam locks, turn the head a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

Also known as compression cam locks, turn the handle a quarter-turn to latch, then another quarter-turn to draw the cam firmly against the door or drawer surface.

The mounting screws on these locks are concealed to prevent tampering.

In addition to an IP65 rating for low-pressure washdown environments, these locks have a squeeze-release handle to prevent accidental opening when unlocked.

Choose these locks if you need each one to open with a different key.

These tight-hold locks are IP65 and NEMA 4 rated for protection against dust, dirt, and washdowns. Press the button and the handle snaps open; push the handle shut for a secure hold.

With a molded inset grip, the handle remains recessed to stay out of the way.

The mounting screws on these locks are concealed to prevent tampering.

Open multiple locks with the same key.

The mounting screws on these locks are concealed to prevent tampering.

Designed for protection against dust, dirt, and washdowns, these padlockable latches are IP65 rated.

These padlockable latches are IP65 rated for protection against dust, dirt, and low-pressure washdowns.

Latch and lock doors and cabinets these swing-handle cam locks, and unlock them with a four-number combination code.

Also known as paddle latches, these are often used on electrical panels, cabinets, and lockers.

Their spring-loaded design withstands vibration, rattling, and shaking better than other face-mount push-to-close latches for a more secure hold.

A catch grabs and holds the strike plate to keep doors shut.

An electrical switch allows these latches to power a light or other signal to indicate whether a door is open or closed.

Each latch has top and bottom spring-loaded balls that can grab the strike plate from different directions.

These latches are adjustable; push the ball in and rotate it to adjust force as well as compensate for misalignment.

Close and open these roller latches with a push—there's no need for a handle.

To prevent doors from slamming, these latches are hydraulic.

There's no need for a mating strike plate for these latches—their spring-loaded arm snaps to engage when closing the door.

When not in use, push the knob in so it's flush and out of the way; it pops out with a touch.

Also known as paddle locks, these are often used on electrical panels, cabinets, and lockers.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame.

Attach these padlockable latches vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame.

Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.

To prevent accidental opening, these latches have a safety catch.

A safety catch prevents accidental opening.

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

To prevent accidental opening, these latches have a safety catch.

These latches are typically used to secure hoods and covers.

To prevent accidental opening, these latches have a safety catch.

A safety catch prevents accidental opening.

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

The latch arm is coated with vinyl so it won't scratch surfaces.

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Draw lightweight surfaces together with these latches.

Lift and turn the handle 180° to open and close these latches.