Mount these adapters in a panel cutout.

Connect two DisplayPort cords of the same gender and connection type.

Connect two fiber-optic cords that have the same gender and connection type. These adapters mount to panels of any thickness, as long as you drill a mounting hole first.

Connect two stereo cords through a panel with these adapters.

Designed to withstand washdown and outdoor environments, these connectors have a seal to block out water and debris.

Audio/video HDMI connectors and cords are rated IP67 when mated.

Create D-sub connection points in panels, cases, and enclosure walls.

These connectors are designed for use in audio equipment.

A threaded M8 end on these connectors keeps contaminants out and withstands vibration better than RJ45 ends on traditional Ethernet cords.

Replace damaged connectors on lighting cables that are commonly used for movie and stage lighting, as well as interior building lighting.

Switch your device on and off without needing a separate switch. These connectors work with industry standard cords often found on power supplies, appliances, and other electronic devices.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Bring power into electronic devices while protecting them from harmful electromagnetic interference (EMI).

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

Snap these receptacles into a cutout on an electrical panel—no screws or clips needed.

Built to handle tough, repetitive-use applications, these are more durable than standard straight-blade connectors.

Use these general purpose connectors indoors in high vibration applications. A quarter turn locks them together when mated to remain secure in high-vibration applications.

Because they tightly thread to M12 connections, these connectors won’t let contaminants in or come loose from vibration in rugged industrial environments and automated systems as they send power and signal or just power to your equipment.

Block signal interference from nearby devices, such as motors and transmitters, while maintaining a strong, stable connection for M12 threads.

Protect harsh environment M12 connectors when not in use.

Screw these micro M16 connectors together to securely connect equipment.

Often used to send power and signal to automated systems, motors, and pumps, these mini connectors carry higher currents than M5, M8, and M12 connectors.

Minimize signal loss between low-current devices with M8 connections.

Also known as pico connectors, these connectors are often used with 8 mm and smaller proximity switches and photoelectric switches.

These connectors have the same pin and socket configuration as connectors that meet MIL-DTL-26482, so they can be used with products that meet the same standard. Quickly mate them by pushing them together.

Install these connectors in panels, enclosures, and bulkheads to join equipment with compatible Deutsch-style DC connectors.

When used together, connectors maintain a watertight and corrosion-resistant NEMA 4X connection.

These connectors meet international standards IEC 309-1 and 309-2. They prevent an electrical arc when separating mated connectors, so you can safely connect and disconnect with the power on.

With thick threads similar to a light bulb, these connectors take only a few turns to lock into place for a secure connection in washdown and high-vibration areas. Detach them just as quickly for frequent maintenance.

Mount these receptacles to control cabinets and equipment in order to quickly connect and disconnect M29 power cords.

These general purpose M23 connectors send power or signal to servomotors, servocontrollers, and servodrives.

Attach these caps to the socket end of washdown USB cords to maintain an IP67 rating when cords are not in use.

Connect devices such as computers, printers, and mobile devices.

Often used in labs, storage facilities, and offices, the shielding blocks low to moderate signal interference from nearby equipment and devices. These cords have a flange on the socket end to mount them in a panel cutout.

Mount blocks to a panel or the surface of a machine. Also known as barrier terminal strips.

The spring-clamp terminals on these blocks make wire installation faster than with other types of terminals. Push wire into the spring clamp for a secure connection that withstands vibration.

Blocks are made of ceramic to withstand elevated temperatures.

Blocks mount in a cutout and have terminals on both sides.

Inspect the terminal block and wiring without opening the cover.

Protect connections against corrosion.These bars are tin-plated copper and have stainless steel terminals.

Stack multiple ring or spade terminals on the stud terminal; the current flows through the stacked terminals.

Distribute up to 150 amps from the center stud terminal to the eight screw terminals around it.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

Clearly mark your emergency push-button switches.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Install in 16 mm dia. cutouts.

Install in 14 mm dia. cutouts.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Choose an actuator and contact block to make your own 30 mm switch.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Switches are rated NEMA 4, 13, and IP66.

These plastic switches are rated NEMA 4X, 13, and IP65 for protection from corrosion, washdowns, and oil/coolant spraying. Install them in 30 mm dia. cutouts.

These switches meet MIL-S-3950.

Able to withstand high currents, these switches are often used with motors and pumps.

Maximize the space in a panel—these switches are half the size of most toggle switches.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Maximize space in a panel—these switches are smaller than most standard rocker switches.

With a round key that is difficult to duplicate, these switches provide a higher degree of security than standard key switches.

Maximize space in a panel with these miniature switches.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

An infrared light beam senses the lightest finger contact to switch a circuit on or off.

Alternate between two batteries without interrupting power.

Push and release the button to activate—no electricity required.

Install these switches in a panel cutout.

Rated IP69K, these switches are protected from high-pressure and high-temperature washdowns.

Mount these switches inside your enclosure to prevent it from opening when power is on—actuating the switch disconnects power and releases the door.

More precise than analog potentiometers, these have a three-digit display that is easy to read.

Made of brass, these fittings have good corrosion resistance.

A 316 stainless steel body gives these fittings the best corrosion resistance of all our metal push-to-connect tube fittings.

An all-metal body and built-in tube support or dual seals allow these fittings to handle the highest pressure ratings of all our push-to-connect tube fittings.

Use at pressures up to 250 psi.

Fittings have good corrosion resistance.

You don't need a clamp to secure these fittings to tubing. They have a nut on the barbed end that tightens to holds the tubing in place.

Made of brass, these couplings are more durable than plastic couplings.

With no latch, these couplings have a compact design to fit in small spaces. They can handle pressures up to 700 psi.

A single sleeve (ferrule) compresses the tubing as you tighten the nut on these fittings, creating a strong seal. They are brass for good corrosion resistance.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 120 psi.

Fittings have a sleeve that bites into tubing as you tighten the nut to form a seal in applications up to 120 psi. Also known as flareless fittings.

These fittings keep their strength in moist environments and meet NSF/ANSI 61 for drinking water. Also known as instant fittings.

Also known as instant fittings, they connect to tubing with a push, and an internal gripping ring and O-ring hold the tubing tight. Use in applications up to 150 psi.

Quick-disconnect couplings consist of a plug and a socket that join with a latch so you can easily connect and disconnect your line. Use in applications up to 150 psi.