Stay warm and dry when working in cold, windy conditions. All overalls have a water-resistant outer shell, as well as a soft, quilted lining for warmth and comfort. They have knee-to-ankle zippers to fit pant legs over bulky boots. They have adjustable suspenders to modify the length.

Nylon overalls resist temperatures down to -50° F. They have a layer of polyester insulation for added warmth. They have two waist pockets and one rear pocket.

Cotton duck provides better abrasion resistance than nylon. These coveralls have a layer of polyester insulation for added warmth. They have one chest pocket, two waist pockets, and two rear pockets.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these coveralls.

Wear these fitted pants under clothing for an added layer of insulation. Made of moisture-wicking polypropylene, these pants trap heat while allowing perspiration to evaporate. Knit cuffs help conserve heat and keep pant legs from riding up.

Find your waist size by measuring just above the top of your hip bone.

Protect the front of your legs against radiant heat, flames, and welding sparks. Made of flexible leather, these chaps resist cuts and abrasion. They have adjustable straps at the waist and on the legs to modify the fit, as well as buckles for a quick release.

When measuring outer seam length, measure from the waist to your ankle. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under the chaps.

These breathable cotton pants keep you cool and protected when welding. They are treated to protect against low radiant heat and minor sparks.

Find your waist size by measuring just above the top of your hip bone.

Bright colors and reflective stripes make workers stand out in high-risk areas and where low-visibility is a concern. These pants meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 garment to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). Made of polyester fabric, these pants are lightweight and moisture wicking to keep you cool. They have an elastic waist, hip slits, and snaps on the cuffs.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these pants.

These pants meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These pants are made of a breathable cotton/nylon blend that’s lightweight, yet durable. Cuffs are open to fit over work boots. They have two waist pockets and two rear pockets.

Find your waist size by measuring just above the top of your hip bone.

Wear these fitted pants under clothing for an added layer of protection against intermittent exposure to flames and radiant heat. They meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 1. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Made of a cotton/acrylic blend, these pants are stretchy, breathable, and moisture wicking for added comfort. The waistband is elastic. They have knit cuffs, which help keep pant legs from riding up.

Find your waist size by measuring just above the top of your hip bone.

These jeans meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet NFPA 2112 standards for protection against flash fire. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These jeans are made of durable denim. Cuffs are open to fit over work boots. They have two waist pockets and two rear pockets.

Find your waist size by measuring just above the top of your hip bone.

These overalls meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. Made of modacrylic/aramid blend, these overalls are extremely durable. They have adjustable suspenders; tighten or loosen them to modify the fit. Adjust the hook and loop straps on the cuffs to tighten pant legs around boots.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

These overalls are made of sturdy PVC-coated polyester to resist abrasion and mildew and keep you dry in wet and rainy conditions. They have open cuffs to fit over boots and adjustable suspenders to modify the length. They have an inner chest pocket that zips shut to keep contents dry. They are washable.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These overalls meet ANSI/ISEA 107 Class E standards for high-visibility clothing—wear with a Class 2 or Class 3 vest, shirt, or jacket to meet Class 3 visibility requirements (visibility by traffic at a minimum distance of 1/4 of a mile). They are polyurethane-coated polyester to keep you dry in wet and rainy conditions. They have snaps on the cuffs, adjustable suspenders to modify the length, and a hook and loop chest pocket.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Protect against chemical spills and splashes. These overalls are polyester with a PVC coating inside and out. They have open cuffs to fit over boots and adjustable suspenders to modify the length.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

These overalls meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These overalls are made of PVC-coated Nomex aramid. They have hook and loop closures on the cuffs and adjustable suspenders to modify the length.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these overalls.

Keep dry in wet and rainy conditions. These pants resist mildew and are washable. All pants have a waist drawstring for an adjustable fit and snaps on the cuffs.

PVC-coated polyester provides good resistance to water and abrasion.

Gore-Tex/nylon blend is extremely durable. It provides excellent protection from water, wind, and abrasion, while allowing perspiration to evaporate to keep you cool.

Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these pants.

Protect against chemical spills and splashes. These suits are polyester with a PVC coating inside and out. They have snaps down the front and a storm flap to keep liquid splashes out. Sleeves and bib overalls have open cuffs to fit over gloves and boots. Bib overalls have adjustable suspenders to modify the length.

Fasten a hood (sold separately) to jackets with collar snaps.

Keep dry in wet and rainy conditions. All suits include a hooded jacket with snaps down the front.

PVC is lightweight and good for single-use applications. The jackets have two waist pockets and snaps on the cuffs. The hood is detachable.

PVC-coated polyester provides good resistance to water and abrasion. They are washable. The jackets have a storm flap and two waist pockets. Suits with pants have open cuffs on the sleeve and snaps on the legs to fit easily inside boots. Suits with bib overalls have snap cuffs on the sleeve and open cuffs on the bottom of the legs.

Gore-Tex/nylon blend is extremely durable. It provides excellent protection from water, wind, and abrasion, while allowing perspiration to evaporate to keep you cool. The jackets have a storm flap, snaps on the cuffs, and a detachable hood. They are washable.

Bib overalls have adjustable suspenders to modify the length.

Pants have an elastic waist.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

These suits meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 2. They also meet ASTM F2733 standards for protection against flash fires. Check the PPE category and minimum arc rating provided for your workplace, and then select all required clothing and personal protective equipment to meet the minimum arc rating. Arc rating measures a garment’s ability to insulate the wearer from burns; the higher the arc rating, the greater the flame resistance. These suits are made of PVC-coated Nomex aramid. Jackets have snaps down the front and a storm flap to keep rain out. Sleeves have hook and loop cuffs; tighten to fit your wrist or expand to wear over gloves. The bib overalls have adjustable suspenders to modify the length.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

Protect against chemical spills and splashes—these one-piece coveralls provide full coverage with fewer openings than chemical-resistant rain suits. They are polyester with a PVC coating inside and out. They have snaps down the front and a storm flap to keep liquid splashes out. They have open cuffs to fit over gloves and boots.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coveralls.

Often used in steel mills and glass plants, aluminized clothing reflects radiant heat and protects against sparks and splashes. These pants have no pockets so they won’t trap hot particles. They have durable leather belt loops, as well as buttons for suspenders. Cuffs are open to fit over boots.

Rayon provides good radiant-heat protection as well as moderate spark protection.

Kevlar aramid/fiberglass blend combines good heat resistance with excellent abrasion and cut resistance.

PBI/Kevlar aramid blend is lighter than other Kevlar blends. It provides excellent heat and abrasion resistance without weighing you down.

Carbon/Kevlar aramid blend is a heavyweight fabric that lasts longer than other Kevlar blends. It holds up in higher temperatures than other materials while providing excellent abrasion and cut resistance.

Find your waist size by measuring just above the top of your hip bone. Pants are oversized to fit over work clothes; take all measurements over any clothing you expect to wear under the pants.