About Sanding Abrasives
More
Nylon Mesh Pad Sanding Blocks
Attach a nylon mesh sanding pad (sold separately) to these blocks for improved comfort and control. Teeth on the bottom of the block sink into the mesh of the sanding pad to hold it in place. Use them with pads at least the size of your block. They're most commonly used with standard 6” Wd. × 9” Lg. sanding pads.
For technical drawings and 3-D models, click on a part number.
| Wd. | Lg. | Material | Each | ||
| A | 3 1/4" | 4 3/4" | Plastic | 000000000 | 00000 |
Easy-Feed Hand Sanding Blocks
Blocks hold an adhesive-back sanding roll—cut off worn abrasive and pull out more as needed. Use the flat surface for sanding corners and the rounded end for curves. Rolls are sold separately.
For technical drawings and 3-D models, click on a part number.
2 1/2" Wd. | 3 1/4" Wd. | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Grit | Lg. | Abrasive Material | Abrasive Backing Material | Sanding Properties | For Use On | Each | Each | ||
For Smooth Finish | |||||||||
| 100 | 55" | Silicon Carbide | Paper | Clog Resistant | Steel, Wood | 0000000 | 00000 | 0000000 | 00000 |
| 120 | 70" | Silicon Carbide | Paper | Clog Resistant | Steel, Wood | 0000000 | 0000 | 0000000 | 0000 |
| 180 | 85" | Silicon Carbide | Paper | Clog Resistant | Steel, Wood | 0000000 | 0000 | 0000000 | 0000 |
For Extra-Smooth Finish | |||||||||
| 240 | 100" | Silicon Carbide | Paper | Clog Resistant | Steel, Wood | 0000000 | 0000 | 0000000 | 0000 |
| 280 | 100" | Silicon Carbide | Paper | Clog Resistant | Steel, Wood | 0000000 | 0000 | 0000000 | 0000 |
Sheet Sanding Block Assortments
Keep a variety of sanding blocks on hand to smooth workpieces of all shapes and sizes. The blocks in these assortments are more comfortable to hold than a sheet alone and give you greater control while you sand. Larger blocks are good for finishing wide surfaces; smaller blocks squeeze into tight spaces. All are bright yellow, so they’re easy to spot in dusty shops. Pair them with adhesive-back or hook-and-loop sanding sheets and rolls (sold separately).
| Includes | No. of Pieces | Material | Each | |
Adhesive Back | ||||
|---|---|---|---|---|
| One 1 1/4" Dia. × 10 3/4" Lg. Block One 1 3/8" Wd. × 10 3/4" Lg. Block One 2 1/8" Dia. × 10 3/4" Lg. Block with one Angled Side One 2 5/8" Wd. × 5 1/4" Lg. Block with Beveled Comfort Grip One 2 5/8" Wd. × 10 3/4" Lg. Block with Beveled Comfort Grip Two 2 1/2" Wd. × 5 3/8" Lg. Blocks | 7 | Foam | 0000000 | 0000000 |
Hook and Loop | ||||
| One 1 1/4" Dia. × 10 3/4" Lg. Block One 1 3/8" Wd. × 10 3/4" Lg. Block One 2 1/8" Dia. × 10 3/4" Lg. Block with one Angled Side One 2 5/8" Wd. × 5 1/4" Lg. Block with Beveled Comfort Grip One 2 5/8" Wd. × 10 3/4" Lg. Block with Beveled Comfort Grip Two 2 1/2" Wd. × 5 3/8" Lg. Blocks | 7 | Foam | 0000000 | 000000 |
Disc Sanding Blocks for Wet Sanding
Keep the surface of your workpiece damp during sanding. These blocks have a sponge in the center that soaks up water or lubricant, then slowly releases it as you sand. This makes the surface of your sanding disc (sold separately) slippery, which helps prevent scratches. It also washes away dust and debris, removing clogs and extending the life of the abrasive. Made of firm foam, these blocks distribute pressure evenly across the surface of the sanding disc. They’re often used for surface preparation or finishing delicate materials.
Push-On File Handles with Changeable Inserts
Change the insert to accommodate different files.
| For File Lg. | For File Shape | Lg. | Material | Includes | Each | |
| 6"-10" | Half Round, Rectangle, Round, Triangle | 4 1/2" | Rubber-Coated Plastic | Two Changeable Inserts | 00000000 | 00000 |
Push-On File Handles
Push one of these handles onto a file tang.
| For File Lg. | For File Shape | Lg. | Material | Each | ||
| C | 4"-6" | Barrette, Crossing, Half Round, Joint, Knife, Marking, Rectangle, Round, Slitting, Square, Triangle | 3 1/2" | Plastic | 00000000 | 00000 |
| C | 8"-10" | Barrette, Crossing, Half Round, Joint, Knife, Marking, Rectangle, Round, Slitting, Square, Triangle | 4 1/2" | Plastic | 00000000 | 0000 |
| C | 12"-14" | Barrette, Crossing, Half Round, Joint, Knife, Marking, Rectangle, Round, Slitting, Square, Triangle | 4 1/2" | Plastic | 00000000 | 0000 |
Corrugated Plastic Box and Pallet Liners
Plastic liners resist punctures, moisture, and many acids. Use them between pallets or layers of stacked material, or to reinforce the bottom of shipping boxes.
| Wd. | Lg. | Thick. | Color | Material | Pkg. Qty. | Pkg. | |
| 6" | 6" | 1/8" | White | Polypropylene Plastic | 5 | 000000000 | 00000 |
| 12" | 12" | 1/8" | White | Polypropylene Plastic | 5 | 00000000 | 0000 |
| 24" | 24" | 1/8" | White | Polypropylene Plastic | 1 | 00000000 | 0000 |
| 24" | 36" | 1/8" | White | Polypropylene Plastic | 1 | 000000000 | 00000 |
| 24" | 48" | 1/8" | White | Polypropylene Plastic | 1 | 00000000 | 00000 |
| 36" | 36" | 1/8" | White | Polypropylene Plastic | 1 | 000000000 | 00000 |
| 36" | 48" | 1/8" | White | Polypropylene Plastic | 1 | 000000000 | 00000 |
| 48" | 48" | 1/8" | White | Polypropylene Plastic | 1 | 00000000 | 00000 |
| 48" | 60" | 1/8" | White | Polypropylene Plastic | 1 | 000000000 | 00000 |
| 60" | 60" | 1/8" | White | Polypropylene Plastic | 1 | 000000000 | 00000 |
Absorbent Wrap
The multilayered tissue in this wrap soaks up spills and moisture while also insulating and cushioning contents. It is 100% recycled. Rolls are perforated and come in a dispenser box for one-hand use.
Filter Paper
Cut or fold this paper to the size and shape you need for liquid filtration applications. It’s often used to make pleated filter cartridges. Paper is 100% synthetic and has no binders or adhesives.
Polyester paper does not ravel or fray.
Polypropylene paper resists solvents and acids.
| Removes Particle Size Down To, microns | Thick. | Max. Temp., °F | Color | Pkg. Qty. | 12" × 12" | 12" × 24" | |
Polyester Plastic | |||||||
|---|---|---|---|---|---|---|---|
| 10 | 0.013" | 480° | White | 6 | 0000000 | ||
| 20 | 0.02" | 300° | White | 6 | 0000000 | ||
| 50 | 0.016" | 300° | White | 6 | 0000000 | ||
| 80 | 0.005" | 480° | White | 6 | 0000000 | ||
Polypropylene Plastic | |||||||
| 5 | 0.02" | 210° | White | 6 | 0000000 | ||
| 10 | 0.014" | 320° | White | 6 | 0000000 | ||
| 40 | 0.008" | 320° | White | 6 | 0000000 | ||
| 100 | 0.008" | 210° | White | 6 | 0000000 | ||
Filter Paper Discs
Often used in laboratory testing, these discs are designed to capture tiny particles from fluids.
Pleated discs have a large surface area, which retains more particles than flat discs.
Cellulose discs are good for general purpose filtering, where exceptional strength or chemical resistance is not needed.
PTFE discs hold up to acids and solvents, and can be used with a wider range of chemicals than fiberglass and cellulose.
| Dia. | Removes Particle Size Down To, microns | Thick. | Max. Temp., °F | Color | Pkg. Qty. | Pkg. | |
Disc | |||||||
|---|---|---|---|---|---|---|---|
Cellulose Plastic | |||||||
| 1 7/8" | 8 | 0.007" | 265° | White | 100 | 0000000 | 000000 |
| 2 3/16" | 11 | 0.007" | 265° | White | 100 | 0000000 | 00000 |
| 2 3/16" | 25 | 0.008" | 265° | White | 100 | 0000000 | 00000 |
| 4 15/16" | 2 | 0.006" | 265° | White | 100 | 0000000 | 00000 |
PTFE Plastic | |||||||
| 1/2" | 0.1 | 0.01" | 500° | White | 50 | 0000000 | 00000 |
| 1/2" | 1 | 0.01" | 500° | White | 50 | 0000000 | 00000 |
| 1" | 0.1 | 0.01" | 500° | White | 50 | 0000000 | 000000 |
| 1" | 1 | 0.01" | 500° | White | 50 | 0000000 | 000000 |
| 1 13/16" | 0.1 | 0.01" | 500° | White | 50 | 0000000 | 000000 |
| 1 13/16" | 1 | 0.01" | 500° | White | 50 | 0000000 | 000000 |
Pleated Disc | |||||||
Cellulose Plastic | |||||||
| 4 15/16" | 2 | 0.006" | 265° | White | 100 | 0000000 | 00000 |
| 12 5/8" | 35 | 0.01" | 265° | White | 100 | 0000000 | 000000 |
Ultra-Thin Filter Fabric
With thickness similar to filter paper, this fabric provides higher flow and is more flexible than felt. It’s often used to filter water, light oil, and water soluble and synthetic coolants in metal polishing, grinding, and finishing applications. This fabric is also good for filtering air and petroleum.
Rayon/polyester fabric is commonly used in coolant applications.
Polyester fabric is 100% polyester for greater strength than rayon/polyester.
| Removes Particle Size Down To, microns | Thick. | Max. Temp., °F | Color | Specifications Met | Lg., ft. | 20" Wd. | 30" Wd. | 50" Wd. | |
Rayon/Polyester Fabric | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 44 | 0.01" | 250° | White | __ | 150 | 0000000 | |||
| 54 | 0.009" | 250° | White | __ | 150 | 0000000 | |||
| 65 | 0.008" | 250° | White | __ | 150 | 0000000 | |||
| 69 | 0.007" | 250° | White | __ | 150 | 0000000 | |||
| 80 | 0.007" | 250° | White | __ | 150 | 0000000 | |||
Polyester Fabric | |||||||||
| 50 | 0.01" | 300° | White | FDA Compliant 21 CFR 177.1630 | 150 | 00000000 | |||
| 60 | 0.009" | 300° | White | FDA Compliant 21 CFR 177.1630 | 150 | 00000000 | |||
| 80 | 0.009" | 300° | White | FDA Compliant 21 CFR 177.1630 | 150 | 00000000 | |||
| 100 | 0.007" | 300° | White | FDA Compliant 21 CFR 177.1630 | 150 | 00000000 | |||
Tripod Easels
| Material | Ht. | Mount Type | Features | Each | |
| Black Plastic | 63" | Freestanding | Adjustable Height Paper Pad Holder, Collapsible | 00000000 | 000000 |