Individual/Set Individual/Set |
---|
|
Height Height |
---|
|
Container Type Container Type |
---|
|
Vise Component Vise Component |
---|
|
Total Capacity Total Capacity |
---|
|
Sets include multiple sizes of matched pairs that are precision ground for tight tolerances on the top and bottom edges. Place a parallel against each vise jaw and rest your workpiece on top to raise it within the vise and allow more clearance for cutting tools.
8" long parallels are also precision ground on both faces.
No. of Pairs | Lg. | Thick. | Ht. | Parallel Tolerance | Material | Container Type | Each | |
2 Precision-Ground Sides | ||||||||
---|---|---|---|---|---|---|---|---|
9 | 6" | 1/4" | 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8" | 0.0001" | Steel | Wood Case | 0000000 | 0000000 |
9 | 6" | 1/4" | 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16" | 0.0001" | Steel | Wood Case | 0000000 | 000000 |
10 | 6" | 1/8" | 1/2", 5/8", 3/4", 7/8", 1", 1 1/8", 1 1/4", 1 3/8", 1 1/2", 1 5/8" | 0.0008" | Steel | Plastic Case | 00000000 | 000000 |
20 | 6" | 1/32" | 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8", 1 11/16" | 0.0001" | Steel | Plastic Case | 000000 | 000000 |
22 | 6" | 1/4" | 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8", 1 11/16", 1 3/4", 1 13/16" | 0.0001" | Steel | Wood Case | 0000000 | 00000000 |
4 Precision-Ground Sides | ||||||||
9 | 8" | 1/4" | 1", 1 1/4", 1 3/8", 1 1/2", 1 5/8", 1 3/4", 1 7/8", 2", 2 1/8" | 0.0002" | Steel | Plastic Case | 0000000 | 000000 |
No. of Pairs | Lg., mm | Thick. | Ht. | Parallel Tolerance, mm | Material | Container Type | Each | |
2 Precision-Ground Sides | ||||||||
---|---|---|---|---|---|---|---|---|
20 | 100 | 2 mm 3 mm 4 mm 5 mm 6 mm | 5 mm, 10 mm, 15 mm, 20 mm 6 mm, 11 mm, 16 mm, 21 mm 7 mm, 12 mm, 17 mm, 22 mm 8 mm, 13 mm, 18 mm, 23 mm 9 mm, 14 mm, 19 mm, 24 mm | 0.01 | Steel | Wood Stand | 0000000 | 0000000 |
Place a parallel against each vise jaw to create a rest for your workpiece. Precision ground to tight tolerances, these matched pairs raise the workpiece within a vise to allow more clearance for cutting tools.
Parallels with two precision-ground sides have a parallel tolerance of 0.0001" on the top and bottom edges.
Parallels with four precision-ground sides have tight parallel tolerances on the top edge, bottom edge, and both faces.
6" long parallels are ground to 0.0001"; 12" long parallels are ground to 0.0002".
Lg. | Thick. | Parallel Tolerance | Material | Choose a Ht. | Pair | |
2 Precision-Ground Sides | ||||||
---|---|---|---|---|---|---|
6" | 1/4" | 0.0001" | Steel | 000000 | 000000 | |
4 Precision-Ground Sides | ||||||
6" | 1/4" | 0.0001" | Steel | 1/2" | 0000000 | 000000 |
6" | 1/4" | 0.0001" | Steel | 3/4" | 0000000 | 000000 |
6" | 3/8" | 0.0001" | Steel | 3/4" | 0000000 | 000000 |
6" | 1/2" | 0.0001" | Steel | 1" | 0000000 | 000000 |
12" | 3/4" | 0.0002" | Steel | 1" | 0000000 | 000000 |
12" | 1" | 0.0002" | Steel | 2" | 0000000 | 000000 |
Instead of keeping an assortment of parallels on hand, adjust these two-piece tools to your exact height requirements. Loosen the screw and slide the pieces in and out. When the desired height is achieved, tighten the screw. Parallels are precision ground on the top and bottom edges and are often used in pairs. Place a parallel against each vise jaw and rest your workpiece on top to raise it within the vise and allow more clearance for cutting tools.
Lg. | Ht. Range | Thick. | Parallel Tolerance | Material | Each | |
2 Precision-Ground Sides | ||||||
---|---|---|---|---|---|---|
1 3/4" | 3/8"-1/2" | 9/32" | 0.0005" | Steel | 0000000 | 000000 |
2 1/8" | 1/2"-11/16" | 9/32" | 0.0005" | Steel | 0000000 | 00000 |
2 11/16" | 11/16"-15/16" | 9/32" | 0.0007" | Steel | 0000000 | 00000 |
3 9/16" | 15/16"-1 5/16" | 9/32" | 0.0007" | Steel | 0000000 | 00000 |
4 3/16" | 1 5/16"-1 3/4" | 9/32" | 0.0009" | Steel | 0000000 | 00000 |
5 1/16" | 1 3/4"-2 1/4" | 9/32" | 0.0009" | Steel | 0000000 | 00000 |
Adjust these two-piece parallels to your exact height requirements. Loosen the screw and slide the pieces in and out. When the desired height is achieved, tighten the screw. Parallels are precision ground on the top and bottom edges and are often used in pairs. Place a parallel against each vise jaw and rest your workpiece on top to raise it within the vise and allow more clearance for cutting tools.
No. of Pieces | Includes | Thick. | Material | Container Type | Each | |
2 Precision-Ground Sides | ||||||
---|---|---|---|---|---|---|
4 | One 3/8" to 1/2" High Parallel (1 3/4" Lg.) One 1/2" to 11/16" High Parallel (2 1/8" Lg.) One 11/16" to 15/16" High Parallel (2 11/16" Lg.) One 15/16" to 1 5/16" High Parallel (3 9/16" Lg.) | 9/32" | Steel | Plastic Pouch | 0000000 | 0000000 |
6 | One 3/8" to 1/2" High Parallel (1 3/4" Lg.) One 1/2" to 11/16" High Parallel (2 1/8" Lg.) One 11/16" to 15/16" High Parallel (2 11/16" Lg.) One 15/16" to 1 5/16" High Parallel (3 9/16" Lg.) One 1 5/16" to 1 3/4" High Parallel (4 3/16" Lg.) One 1 3/4" to 2 1/4" High Parallel (5 1/16" Lg.) | 9/32" | Steel | Plastic Pouch | 0000000 | 000000 |
Spring-loaded to keep parallels in place on a vise, squeeze the ends together to place inside; release and they push outward to hold the parallels against the vise jaws. They are also known as parallel separators.
Quickly move parallels in and out of these jaws and raise your workpiece within the vise. Choose jaws and the mating pair or set of parallels. Mount jaws to the vise, slide the parallels in place, and then rest your workpiece on top to allow more clearance for cutting tools.
Jaw | ||||||
---|---|---|---|---|---|---|
Wd. | Ht. | Thick. | Thick. Tolerance | Material | Pair | |
4" | 1/2" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 000000 |
4" | 3/4" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 00000 |
4" | 1" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 00000 |
6" | 3/4" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 00000 |
6" | 1" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 00000 |
6" | 1 1/4" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 00000 |
6" | 1 1/2" | 0.118" | -0.005" to 0.005" | Steel | 0000000 | 00000 |
The matching jaws are ground flat for a firm grip and even pressure when clamping smooth surfaces. The two screws turn independently to make small, individual adjustments to each jaw.
Level machinery, check surface flatness, and scribe work positions. The top and bottom faces are precision ground within 0.0001" per 12".
Also known as ball-bearing parallels, these plates have multidirectional balls that project from the top and bottom to position and move small, heavy items over short distances.
For technical drawings and 3-D models, click on a part number.
A rule, compass, protractor, and template all in one tool.
Graduation Marks | ||||||
---|---|---|---|---|---|---|
Head Material | Blade Lg. | Max. Circle Dia. | Blade | Rolling Scale | Each | |
Plastic | 12" | 24" | 16ths, 1 mm | 32nds, 1 mm | 000000 | 000000 |