How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
Screw-On Hose Fittings for Hydraulic Fluid
With just a vise and a wrench, make or repair hose assemblies in the field. These fittings thread directly onto hydraulic hose, so you don't need to crimp. To install, separate the two pieces. Screw the hose end onto your hose first and then thread the two pieces of the fitting back together. These fittings compress against the hose to form a strong seal. Also known as reusable fittings, they can be unscrewed from your hose and used again.
Fittings with a female tube end swivel 360° until tightened for easy installation.
Fittings with a 37° flared end are also known as JIC (Joint Industrial Council) fittings.
Zinc-plated steel fittings are stronger and resist wear and tear better than 316 stainless steel fittings. The zinc plating resists rusting in wet environments.
NPTF (Dryseal) threads are compatible with NPT threads.
Note: Fittings are only for use with hydraulic hose.
- Maximum Pressure: See table
- Temperature Range: -40° to 212° F
- For Hose Manufacturer Series:
Parker 42 Series Fittings: Parker 422 SAE J517 100R1AT
Parker 30 Series Fittings: Parker 302 SAE J517 100R2AT
Parker 51R Series Fittings: Parker 510D and 518D J517 SAE 100R7
Fittings | Hose | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Hose | Per Ft. | |||||||||
| ID | OD | Pipe Size  | Thread Type | Dash Size | Max. Pressure | Each | 1-99 | 100-Up | ||
Zinc-Plated Steel—Parker 42 Series | ||||||||||
| 1/4" | 9/16" | 1/4 | NPTF | 04 | 3,250 psi @ 72° F | 00000000 | 000000 | 00000000 | 00000 | 00000 |
| 5/16" | 9/16" | 1/4 | NPTF | 05 | 3,100 psi @ 72° F | 00000000 | 00000 | 00000000 | 0000 | 0000 |
| 3/8" | 11/16" | 3/8 | NPTF | 06 | 2,600 psi @ 72° F | 00000000 | 00000 | 00000000 | 0000 | 0000 |
| 1/2" | 13/16" | 1/2 | NPTF | 08 | 2,200 psi @ 72° F | 00000000 | 00000 | 00000000 | 0000 | 0000 |
| 3/4" | 1 1/8" | 3/4 | NPTF | 12 | 1,500 psi @ 72° F | 00000000 | 00000 | 00000000 | 00000 | 00000 |
| 1" | 1 7/16" | 1 | NPTF | 16 | 1,250 psi @ 72° F | 00000000 | 000000 | 00000000 | 00000 | 00000 |
- Maximum Pressure: See table
- Temperature Range: -40° to 212° F
- For Hose Manufacturer Series:
Parker 42 Series Fittings: Parker 422 SAE J517 100R1AT
Parker 30 Series Fittings: Parker 302 SAE J517 100R2AT
Parker 51R Series Fittings: Parker 510D and 518D J517 SAE 100R7 - Specifications Met: See table
Fittings | Hose | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Hose | Per Ft. | |||||||||||
| ID | OD | For Tube OD | Thread Size | Thread Type | Dash Size | Max. Pressure | Specifications Met | Each | 1-99 | 100-Up | ||
Zinc-Plated Steel—Parker 42 Series | ||||||||||||
| 1/4" | 9/16" | 1/4" | 7/16"-20 | UN/UNF (JIC) | 04 | 3,250 psi @ 72° F | SAE J516 | 00000000 | 000000 | 00000000 | 00000 | 00000 |
| 3/8" | 11/16" | 3/8" | 9/16"-18 | UN/UNF (JIC) | 06 | 2,600 psi @ 72° F | SAE J516 | 00000000 | 00000 | 00000000 | 0000 | 0000 |
| 1/2" | 13/16" | 1/2" | 3/4"-16 | UN/UNF (JIC) | 08 | 2,200 psi @ 72° F | SAE J516 | 00000000 | 00000 | 00000000 | 0000 | 0000 |
| 3/4" | 1 1/8" | 3/4" | 1 1/16"-12 | UN/UNF (JIC) | 12 | 1,500 psi @ 72° F | SAE J516 | 00000000 | 00000 | 00000000 | 00000 | 00000 |
| 1" | 1 7/16" | 1" | 1 5/16"-12 | UN/UNF (JIC) | 16 | 1,250 psi @ 72° F | SAE J516 | 00000000 | 000000 | 00000000 | 00000 | 00000 |