Save up to four temperature and airflow settings.

Sets include a focused nozzle for concentrated airflow, a flat nozzle for heating wide surfaces, and a curved nozzle for installing heat-shrink tubing.

Prevent buildup of electrostatic discharge (ESD) that can damage electronic components.

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Insert plastic welding rod through a second opening in the nozzle. It directs air to heat the rod and weld plastic.

Sets include a focused nozzle for concentrated airflow, a flat-tip nozzle for heating wide surfaces, and a deflecting nozzle that protects adjacent surfaces from heating.

Prevent accidental contact with hot nozzles.

Blast your heating, drying, and shrinking projects with hot air to get the job done quickly. Choose from blowers with temperature settings from 300° to 750° F.

Combine high-volume airflow with low-heat output for warming and drying.

Distribute heat over a wide area for large jobs.

Spot-dry paint, adhesives, and other surface coatings and fillers.

Heat objects from up to 8 ft. away.

Clamp to the edge of a workbench or table and adjust the arm to direct heat where you need it.

Use these cordless lamps for UV curing as well as leak detection, quality control inspection, and testing.

Designed for UV curing of small areas, these lamps also aid in leak detection, quality control inspection, and testing.

These blowguns have a metal body.

The rubber tip won't damage parts.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Connect the included hose to your air supply and these blowguns are ready to use.

Two inlets allow connection to air lines above or below. Use the top inlet when the blowgun is suspended from an overhead hose and the bottom inlet for bench and floor hoses.

The included hose is ready to connect to your air supply.

These guns include a rubber tip that won't damage your workpiece.

Also known as air-shield and safety-shield blowguns, an outer air curtain deflects flying chips and dust while the center airstream blows away debris.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

These blowguns provide more than two times the airflow of standard guns.

Maximize comfort and minimize strain with these lightweight guns.

The most powerful blowguns we sell, these use compressed air to clean and blow debris.

Clean surfaces without transferring dust or moisture from the air hose. These blowguns have a replaceable filter that traps particles such as rust and smoke and absorbs moisture.

These guns provide more than three times the airflow of standard static-eliminating blowguns.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Create a sheet of high-velocity air.

Use one bracket for 3" to 18" wide air knives; two brackets for 24" to 42" wide air knives, and three brackets for 48" wide air knives.

Also known as air wipes, these use a 360° airstream to blow off, dry, clean, and cool tubes, cables, extruded shapes, and hoses.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

These premium nozzles are engineered for the most efficient airflow consumption.

Attach to your blowgun to direct airflow.

Extend these telescoping nozzles to increase your reach.

Adjust airflow to control consumption and noise.

Nozzles are attached to a flexible tube or hose that bends and holds its shape until you reposition it.

Choose a base, hose, and nozzle for a custom setup.

Replace filters or add parts baskets and drum dollies to your parts cleaning vacuum/blowers. All of these filters and accessories can be used with compatible MiJET parts cleaners.

These blowers have an aluminum housing for spark resistance.

Install these blowers into ductwork where high static pressures are present.

A pivoting head allows you to direct air where it's needed.