Bend the shaft to reach into awkward spaces and grab small parts in the wire jaws.

An LED lights the wire jaws and the shaft bends to reach objects in awkward spaces.

Pick up screws, nuts, and other small steel objects.

LEDs light the magnetized tip for picking up screws, nuts, and other small steel objects in dark areas.

A fluorescent orange handle makes these retrievers stand out, so they’re less likely to be misplaced.

LEDs light the magnetized tip and the shaft bends and stays in position to reach objects in awkward spaces.

Protect against accidental contact with live electrical circuits. These insulated retrievers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. The shaft bends and stays in position to reach objects in awkward spaces.

An extra-long shaft and pivoting head lets you access hard-to-reach material from almost any angle.

Also known as rescue hooks, these retrievers are often used to pull an injured worker away from electrical hazards without risking the safety of other workers. They have a fiberglass handle and insulated hook to protect against accidental contact with live electrical circuits. The handle is tested to meet the requirements of ASTM F711.

Safely push, pull, and clear objects from hard-to-reach places such as conveyors, chutes, and hoppers. With a lightweight handle and plastic head, these removers won’t damage material finishes.

The pointed tip with curved hook is good for holding and pulling cylindrical material.

Attach your locking pliers to a slide hammer to pull stubborn objects.

When there isn't clearance to use standard-grip locking pliers, the angled handle on these tools gives you access. Lock the jaws around a workpiece and these pliers stay clamped in place.

Hold larger workpieces than standard locking pliers. These tools lock in a vise-like grip around a workpiece and stay clamped in place.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines.

Reach around closely spaced components and other obstructions. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Colorful plastic grips make these tools stand out, so they're less likely to be misplaced.

Made of stainless steel, these pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Extra-long handles enable access in hard-to-reach areas.

Prevent damage to your workpiece.

Also known as duckbill and flat-nose pliers, the extra-wide tips give you better grip on your work. These stainless steel tools are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

With thinner tips than standard long-nose pliers, these tools fit into tight spaces.

Extra-wide tips give you a better grip on your work, and smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Reach around closely spaced components and other obstructions.

Squeeze the handles to open the jaws; release to snap them closed. Once closed, they stay clamped in place to leave your hands free. These pliers reach around closely spaced components and other obstructions.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. They are shaped to reach around closely spaced components and other obstructions.

Smooth, consistent movement ensures precision. These tools have a slip-resistant ultra grip that’s shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers and shaped to reach around closely spaced components and other obstructions.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free.

You don't have to move the pivot point on these pliers—squeeze the handle and the jaws adjust to fit your workpiece.

Choose these tools when you need the gripping power of a pipe wrench with the adjustability of pliers. Slide the pivot point of the jaws to a range of positions.

Designed for looping and bending wire, these steel tools are also known as round-nose pliers.

Made of beryllium copper that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as round-nose pliers, use for looping and bending wire.

The smallest round-nose pliers we offer allow you to bend and loop wire in the smallest spaces, including under a microscope.

The narrow jaws fit into tight spaces, and the slip joint allows you to switch between two different jaw opening sizes.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

You don't have to move the pivot point on these pliers—squeeze the handles and the jaws adjust to fit your workpiece.

The bottom jaw is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

Move the curved jaws to 15 positions for fine adjustment. These pliers have a bottom jaw that is shorter than the top for a firm grip on the flats of bolt heads and nuts that have rounded corners.

These stainless steel pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to pull, bend, and cut wire.

When there isn't clearance to use standard-grip pliers, the angled head on these tools gives you access. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire.

Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Clamp down on nonreinforced hose and tube to squeeze it shut, eliminating the need to drain the hose when working on pumps, heating and cooling systems, and fuel lines. Squeeze the handles to lock the jaws and these pliers stay in place.

Get the best possible grip on round objects, such as oil filters, connectors, and PVC pipe. Also known as cannon plug pliers, all of these pliers have curved jaws.

Each style of tweezer is a different color for easy identification.

Hold small parts without the need to apply pressure. Squeeze these tweezers to open the tips and release to close them.

An LED lights the tips for picking up and positioning in dark areas.

Extra-long tips provide access to material in hard-to-reach areas.

Made of brass, these tweezers inhibit sparking.

A PTFE coating on the tips prevents material from sticking to these tweezers.

Choose plastic tweezers for a soft, nonmarring grip. These tools are corrosion resistant and nonmagnetic.

Protect against accidental contact with live electrical circuits. These plastic-insulated tweezers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Wide, flat tips ensure a good grip on thin sheets and labels.

Extend the life of these tweezers by replacing the tips when they become worn. Tips are carbon fiber, which insulates against heat and won’t nick or scratch components.

Prevent buildup from electrostatic discharge (ESD) that can damage sensitive equipment. The cushioned grips drain static from your application. These premium tweezers are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Solder won’t stick to these tweezers. Made of titanium for high strength and durability, they are nonmagnetic and have excellent corrosion resistance. These premium tools are Swiss made to tight tolerances for the perfect tip alignment required for work under magnification.

Cap the tips of your tweezers to protect them from damage. These flexible silicone covers fit most styles of tweezers.

Designed for placing chips and electronic components on circuit boards, these tweezers have rectangular-shaped tips that are angled to reach over and around obstructions. They are also known as SMD (surface-mount device) tweezers.

Keep hands away from machinery—use these lightweight tools to pick up and hold parts. The pliers-style handles provide more comfort and control than standard tongs.

Extra-slim jaws taper to a narrow point that can reach into tight spots.

Use these general purpose tongs for gripping and positioning.

The handle has a magnet at the end to pick up small steel objects. Use these picks to hold and position wire, springs, and other small parts.

Change tips to use a different size or style pick for holding and positioning wire, springs, and other small parts.

Reach around obstructions and into tight spaces with picks that have long, angled tips. Use these tools to hold, separate, and position wire, springs, and other small parts.

Use these tools to hold, separate, and position wire, springs, and other small parts.

Avoid nicking or scratching sensitive components. Also known as spudgers, these picks are good for adjusting small wires or separating press-fit plastic components.

An insulated handle protects against accidental contact with live electrical circuits. These picks are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of beryllium copper that is FM approved, these picks satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Shaped for removing the seals around bearings, insert the tip of these tools behind the seal and pull. The curved head provides leverage to remove stuck and stubborn material.

Replace tips when they become worn or to use a different style. The corkscrew tip twists into material to provide a firm hold while the handle provides the necessary leverage for pulling.

Install and position tiny springs and wires. Unlike conventional picks that have pointed tips, these are rounded to prevent damage to sensitive components.

Also known as packing irons, the offset handle allows you to install packing into hard-to-reach areas while the blunt tip prevents accidentally cutting or damaging the packing material.

Use the assorted tools in these sets to pull material out of tight spots. The corkscrew tips twist into material for a firm hold while the handle provides the necessary leverage for pulling.

Made of beryllium copper with an aluminum-bronze handle, these pullers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use to extract material from tight spots.

Sets include an assortment of handles and tips for pulling material out of tight spots. Replace tips when they become worn or to use a different style.