Solution Type Solution Type |
|---|
|
For Removing For Removing |
|---|
For Use With For Use With |
|---|
|
Solution Form Solution Form |
|---|
|
Water-Based Parts Washing Solutions
Clean faster by heating these solutions up to 140°. After washing, parts can be rinsed with water.
Dilute liquid concentrate with water. 5-gallon pail makes up to 50 gallons of solution. 55-gallon drum makes up to 500 gallons of solution.
Mix three to eight ounces of powder per gallon of water.
Container | ||||||
|---|---|---|---|---|---|---|
| Size | Type | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid Concentrate | ||||||
| 5 gal. | Pail | Aluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Carbon Residue, Epoxy, Grease, Oil, Paint, Rust | 140° | 0000000 | 000000 |
| 55 gal. | Drum | Aluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Carbon Residue, Epoxy, Grease, Oil, Paint, Rust | 140° | 0000000 | 000000 |
Powder | ||||||
| 25 lbs. | Pail | Aluminum, Brass, Bronze, Copper, Titanium | Carbon Residue, Epoxy, Grease, Oil, Paint, Rust | 140° | 0000000 | 000000 |
Low-Foam Water-Based Parts Washing Solutions
This type of solution is good for use in spray washers where foaming can be a concern. It can be heated to 140° for faster cleaning. Dilute with water to make up to 40 gallons of solution.
| Container Size, gal. | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid Concentrate | |||||
|---|---|---|---|---|---|
| 5 | Iron, Stainless Steel, Steel | Carbon Residue, Epoxy, Grease, Oil, Paint, Rust | 140° | 0000000 | 000000 |
No-Residue Solvent-Based Parts Washing Solutions
Unlike other solvent-based parts washing solutions, these won't leave anything behind. They have a mild odor. Note: Use only at room temperature; do not heat.
Solutions with 141° flash point are known as high-flash-point solutions.
| Container Size, gal. | For Use On | For Removing | Flash Point, °F | Each | |
Liquid | |||||
|---|---|---|---|---|---|
| 5 | Aluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Asphalt, Buffing and Polishing Compounds, Fingerprints, Grease, Lapping Compounds, Oil, Paint | 105° | 0000000 | 0000000 |
| 5 | Aluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, Titanium | Buffing and Polishing Compounds, Grease, Lapping Compounds, Oil | 141° | 0000000 | 000000 |
Solvent-Based Parts Washing Solutions
Leave a corrosion-resistant film on parts after washing. These solutions have a mild odor and contain no chlorinated solvents. Note: Use only at room temperature; do not heat.
Solutions with 141° flash point are known as high-flash-point solutions.
Container | ||||||
|---|---|---|---|---|---|---|
| Size, gal. | Container Type | For Use On | For Removing | Flash Point, °F | Each | |
Liquid | ||||||
| 5 | Pail | Aluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, Titanium | Buffing and Polishing Compounds, Grease, Lapping Compounds, Oil | 105° | 000000 | 0000000 |
| 5 | Pail | Aluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, Titanium | Buffing and Polishing Compounds, Grease, Lapping Compounds, Oil | 141° | 0000000 | 000000 |
| 50 | Drum | Aluminum, Brass, Bronze, Copper, Iron, Plastic, Stainless Steel, Steel, Titanium | Buffing and Polishing Compounds, Grease, Lapping Compounds, Oil | 105° | 000000 | 00000000 |
Solutions for Microbial Parts Washers
Use in bioremediating (also known as self-cleaning) parts washers. Microbes in the solution consume and destroy grease and oil to prevent it from building up in the solution. Dilute with water to make 19 gallons of solution.
| Solution Type | Container Size, gal. | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid Concentrate | ||||||
|---|---|---|---|---|---|---|
| Water Based | 1 | Aluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Asphalt, Carbon Residue, Fingerprints, Grease, Lapping Compounds, Oil, Paint, Wax | 120° | 0000000 | 0000000 |
Water-Based Cleaning Solutions for Ultrasonic Cleaners
Also known as aqueous cleaning solutions, these water-based solutions are for general purpose cleaning.
Solution for removing carbon residue, grease, and oil can be diluted with water to make up to 20 gallons.
Solution for removing grease and oil from aluminum, brass, bronze, copper, glass, iron, plastic, stainless steel, steel, and titanium can be diluted with water to make up to 7 gallons.
| Container Size, gal. | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid Concentrate | |||||
|---|---|---|---|---|---|
| 1 | Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Carbon Residue, Grease, Oil | 150° | 0000000 | 000000 |
| 1 | Aluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Grease, Oil | 150° | 0000000 | 00000 |
Heavy Duty Water-Based Cleaning
Solutions for Ultrasonic Cleaners
Also known as semi-aqueous cleaning solutions, these consist of water and other components such as ammonia or citrus. They clean parts with heavy contamination such as buffing and lapping compounds.
Water-based solution can be diluted with water to make up to 10 gallons.
Water-based solutions with ammonia or citrus can be diluted with water to make up to 7 gallons.
Note: Solution with ammonia should be tested before using with plastic. Do not heat.
| Solution Type | Container Size, gal. | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid Concentrate | ||||||
|---|---|---|---|---|---|---|
| Water Based | 1 | Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Buffing and Polishing Compounds, Grease, Oil, Wax | 150° | 000000 | 0000000 |
| Water Based with Ammonia | 1 | Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Buffing and Polishing Compounds, Grease, Lapping Compounds | 72° | 0000000 | 000000 |
| Water Based with Citrus | 1 | Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Grease | 180° | 0000000 | 000000 |
Solvent-Based Cleaning Solutions for Ultrasonic Cleaners
The strongest ultrasonic cleaning solution we offer, it’s also ammonia-free. Rinse with the rinsing solution (sold separately) to dissolve any residue. Note: Do not heat.
Rinsing Solutions for Ultrasonic Cleaners
Dissolve residue that solvent-based cleaning solutions can leave behind. This solution contains no chlorinated solvents. For plastic, test before use. Note: Do not heat.
| Solution Type | Container Size, gal. | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid | ||||||
|---|---|---|---|---|---|---|
| Petroleum Based | 1 | Aluminum, Brass, Bronze, Copper, Glass, Iron, Plastic, Stainless Steel, Steel, Titanium | Grease, Oil | 72° | 0000000 | 000000 |
Disinfecting Solutions for Ultrasonic Cleaners
In addition to a cleaner, this solution performs as a disinfectant, deodorant, germicide, and fungicide. It can be diluted with water to make up to 16 gallons. Note: Do not heat.
| Solution Type | Container Size, oz. | For Use On | For Removing | Max. Temp., °F | Each | |
Liquid Concentrate | ||||||
|---|---|---|---|---|---|---|
| Water Based | 16 | Glass, Stainless Steel | Bacteria | 72° | 000000 | 000000 |