An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Make castings and fill voids with these two-part pourable epoxies.

Everything you need to repair cracked, worn, and damaged surfaces—even underwater.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Fill cracks in horizontal, vertical, and overhead concrete surfaces.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

To stop leaks in metal tanks and equipment without draining the contents, heat the area with a heat gun or torch to melt the stick and form a permanent seal. The resulting patch can withstand pressure up to 600 psi.

Seal leaks around small holes.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Mix these two-part surface fillers together to repair leaks and cracks as well as to rebuild rough spots in metal.

These knives have a sturdy blade for scraping paint and debris and for applying and smoothing joint and spackling compounds.

Keep drywall compound close at hand so you can apply it over seams quickly and efficiently.

Thicker than taping knives, trowels can apply and spread large amounts of drywall compound quickly.

Also known as mud pans, use these to mix small amounts of drywall compound or to bring it to your work area.

Spread, scrape, and shape mortar.

Remove hardened flecks of mortar, dirt, and other debris.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Also known as mortar hoes, the blade on these tools has holes to allow concrete to pass through as you mix.

Stakes provide a firm anchor for concrete form boards.

Roll the seams where wall coverings meet for an even, continuous appearance.

Simplify and speed up hole repairs—stick a patch over the area and cover with spackling compound.

Fix cracks in drywall and stop them from spreading. Place the included fabric over wall cracks and cover with the acrylic paste. This results in a flexible, nonshrinking repair that prevents cracks from reappearing as the building continues to settle.

Also known as Plaster of Paris, these fillers conceal small cracks, nail holes, and blemishes. Mix with water.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Spread patching compounds in dry, wet, and even water-filled holes.

Use these two-part fillers to rebuild cracked or worn plastic surfaces.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Fix damaged wood or build up and replace missing wood.

These patching compounds are the most flexible and watertight we offer.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Extend the life of your footwear with these abrasion- and water-resistant epoxies.

These machinable epoxies are mixed with metal so they can be used to repair cracks and threaded holes.