Use these unshielded cords where signal interference is not a concern.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission. They have an RJ45 plug on each end.

Use these unshielded cords where signal interference is not a concern.

Transfer data between computers, printers, and mobile devices.

Add a USB cord to these chargers to power up mobile devices and other electronics.

Rated IP67, these cords withstand washdowns and temporary submersion. Connect them to a USB device inside an enclosure.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Often used in automated applications such as robotics, these cords withstand continuous motion without degrading data transmission.

Transmit video to a single monitor.

Connect computers, servers, and switches in a fiber-optic network.

Connect audio to a single speaker, or extend the distance between stereo audio devices.

Replace the cords connecting your robot controller and teach pendant when they become worn, or switch them out for a different length.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Power multiple devices from one power source.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

Plug these cords into computers, lab equipment, and office machines that have IEC connections.

Pull wires all the way through the connector face, and then use the crimper to cut and crimp wires in one step.

The snap-on wire connection pierces the insulation to eliminate the need for wire stripping.

These sockets have a 110 punch-down connection; use a punch-down tool to terminate.

These connectors allow you to connect USB devices to a circuit board.

Protect sensitive equipment from electromagnetic interference.

Mount these connectors in a panel cutout.

These D- and X-coded M12 connectors are desgined for high-speed Ethernet cable in washdown environments.

Mount these adapters in a panel cutout.

Bring USB connections closer to where you need them.

Adapt connections to attach cords to a computer.

Create various configurations by snapping these adapters into the ports of keystone wall plates.

Mount these adapters in a panel cutout.

Alter DVI, DisplayPort, and HDMI connections.

Send a signal from one coaxial cord to multiple devices.

Extend an audio connection by plugging a cord into each end of these adapters.