For Use On For Use On |
|---|
|
|
Size Size |
|---|
Decimal Size Equivalent Decimal Size Equivalent |
|---|
Bit Style Bit Style |
|---|
 | Hollow |
 | Spiral Flute |
Shank Type Shank Type |
|---|
 |  |
| Round | Threaded Hub |
Overall Length Overall Length |
|---|
|
|
|
Bit ID Bit ID |
|---|
Shank Size Shank Size |
|---|
Component Component |
|---|
|
Length Class Length Class |
|---|
 | Jobbers' Length |
 | Short Length |
About Drill Bits
More
Drill Bit Decimal Size Equivalents
More
About Masonry Drill Bits
More
Core Drill Bits for Glass and Ceramic
Reduce the chance of chipping and cracking when drilling in glass and ceramic. These hollow bits are diamond-coated for long life and fast cutting. They are for use in drill presses only and require an adapter (sold separately). Attach the threaded nut to the adapter, then install the adapter into the chuck on a drill press. Coolant, such as water, is required when drilling with these bits. The size listed is the bit's OD.
Drill press adapters attach to a water line, which acts as coolant during drilling, and include an on/off valve.
| Size | Decimal Size Equivalent | Bit ID | Overall Lg. | Max. Drilling Dp. | Diamond Tip Lg. | Diamond Grit | Recommended Operating Speed, rpm | Each | |
Diamond-Coated Steel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3/32" | 0.0938" | 0.043" | 3 1/2" | 2" | 1/8" | 100 | 1,800-2,400 | 0000000 | 0000000 |
| 1/8" | 0.125" | 0.075" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 5/32" | 0.1563" | 0.106" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 3/16" | 0.1875" | 0.137" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 7/32" | 0.2188" | 0.169" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 1/4" | 0.25" | 0.2" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 9/32" | 0.2813" | 0.231" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 5/16" | 0.3125" | 0.262" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 00000 |
| 3/8" | 0.375" | 0.325" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 00000 |
| 7/16" | 0.4375" | 0.387" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 1/2" | 0.5" | 0.446" | 3 1/2" | 2" | 1/4" | 100 | 1,800-2,400 | 0000000 | 000000 |
| 9/16" | 0.5625" | 0.504" | 3 1/2" | 2" | 1/4" | 100 | 1,250-1,800 | 0000000 | 000000 |
| 5/8" | 0.625" | 0.562" | 3 1/2" | 2" | 1/4" | 100 | 1,250-1,800 | 0000000 | 000000 |
| 3/4" | 0.75" | 0.692" | 3 1/2" | 2" | 1/4" | 100 | 1,250-1,800 | 0000000 | 000000 |
| 7/8" | 0.875" | 0.817" | 3 1/2" | 2" | 1/4" | 100 | 1,250-1,800 | 0000000 | 000000 |
| 1" | 1" | 0.94" | 3 1/2" | 2" | 1/4" | 100 | 1,250-1,800 | 0000000 | 000000 |
| 1 1/4" | 1.25" | 1.19" | 3 1/2" | 2" | 1/4" | 100 | 1,250-1,800 | 0000000 | 000000 |
Masonry Drill Bits for Drilling Rigs
Use these diamond-coated hollow bits for wet drilling of masonry, concrete, and rebar with a drilling rig. They're not for dry drilling or use with portable electric drills or grinders. The size listed is the bit’s OD.
Adapters let you use your bit on a drilling rig with a different thread size.
Shank | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Bit ID | Overall Lg. | Max. Drilling Dp. | Thread Size | Type | Size | Point Style | Specifications Met | For Use On | Each | |
Diamond-Coated Steel | ||||||||||||
| 1" | 1" | 3/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 0000000 |
| 1 1/8" | 1.125" | 1" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 1/4" | 1.25" | 1" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 3/8" | 1.375" | 1 1/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 3/8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 1/2" | 1.5" | 1 1/4" | 15 1/2" | 13" | 5/8"-11 | Threaded Hub | 1 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 1 3/4" | 1.75" | 1 1/2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 1 3/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2" | 2" | 1 3/4" | 16 1/2" | 14" | 1 1/4"-7 | Threaded Hub | 2" | Standard | __ | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2 1/4" | 2.25" | 2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 1/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2 1/2" | 2.5" | 2 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 2 3/4" | 2.75" | 2 1/2" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 2 3/4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 3" | 3" | 2 3/4" | 16 1/2" | 14" | 1 1/4"-7 | Threaded Hub | 3" | Standard | __ | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 3 1/2" | 3.5" | 3 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 3 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 4" | 4" | 3 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 4" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 4 1/2" | 4.5" | 4 1/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 4 1/2" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 5" | 5" | 4 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 5" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 6" | 6" | 5 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 6" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 7" | 7" | 6 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 7" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 8" | 8" | 7 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 8" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 10" | 10" | 9 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 10" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| 12" | 12" | 11 3/4" | 15 1/2" | 13" | 1 1/4"-7 | Threaded Hub | 12" | Standard | ANSI Standards | Masonry, Concrete, Reinforced Concrete, Rebar | 0000000 | 000000 |
| Overall Lg. | Male Thread Size | Female Thread Size | For Drill Bit Shank Type | Each | |
| 5 3/8" | 5/8"-11 | 1 1/4"-7 | Threaded Hub | 0000000 | 0000000 |
Thread Adapters for Masonry Drill Bits for Drilling Rigs
Adapt a bit for use on a drilling rig with a different thread size.
| Overall Length | Male Thread Size | Female Thread Size | For Drill Bit Shank Type | Each | |
| 5 3/8" | 5/8"-11 | 1 1/4"-7 | Threaded Hub | 0000000 | 0000000 |
Drill Bits for Carbon Fiber, Fiberglass, and Graphite
These jobbers'-length bits have the rigidity and length required for most applications. They are designed to make clean holes in abrasive material. Their point keeps the bit centered without a pilot hole.
Diamond-coated drill bits are highly wear resistant for drilling in abrasive material. They last longer than uncoated bits.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | ||||||||
Diamond-Coated Carbide | ||||||||
| 1/16" | 0.0625" | 1 1/2" | 0.6" | Round | 1/16" | Split | 0000000 | 000000 |
| 5/64" | 0.0781" | 1 3/4" | 0.7" | Round | 5/64" | Split | 0000000 | 00000 |
| 3/32" | 0.0938" | 2" | 0.8" | Round | 3/32" | Split | 0000000 | 00000 |
| 7/64" | 0.1094" | 2 1/4" | 1" | Round | 7/64" | Split | 0000000 | 00000 |
| 1/8" | 0.125" | 2 1/4" | 1" | Round | 1/8" | Split | 0000000 | 00000 |
| 9/64" | 0.1406" | 2 1/2" | 1.1" | Round | 9/64" | Split | 0000000 | 00000 |
| 5/32" | 0.1563" | 2 1/2" | 1.1" | Round | 5/32" | Split | 0000000 | 00000 |
| 11/64" | 0.1719" | 2 3/4" | 1.3" | Round | 11/64" | Split | 0000000 | 00000 |
| 3/16" | 0.1875" | 2 3/4" | 1.3" | Round | 3/16" | Split | 0000000 | 00000 |
| 7/32" | 0.2188" | 3" | 1.4" | Round | 7/32" | Split | 0000000 | 00000 |
| 1/4" | 0.25" | 3 1/4" | 1.6" | Round | 1/4" | Split | 0000000 | 00000 |
| 5/16" | 0.3125" | 3 3/4" | 1.9" | Round | 5/16" | Split | 0000000 | 00000 |
| 3/8" | 0.375" | 4 1/4" | 2.2" | Round | 3/8" | Split | 0000000 | 000000 |
| 1/2" | 0.5" | 4 3/4" | 2.4" | Round | 1/2" | Split | 0000000 | 000000 |
Short-Length Drill Bits for Carbon
Fiber, Fiberglass, and Graphite
Also known as screw-machine and stub-length bits, these provide maximum rigidity for drilling straighter holes than jobbers’-length drill bits. A diamond coating gives them the sharpness and wear resistance for drilling clean holes in abrasive material. The split point keeps the bit centered without a pilot hole.
Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| Size | Decimal Size Equivalent | Overall Lg. | Max. Drilling Dp. | Type | Size | Point Style | Each | |
Inch | ||||||||
Diamond-Coated Carbide | ||||||||
| 1/8" | 0.125" | 2" | 0.5" | Round | 1/8" | Split | 0000000 | 000000 |
| 9/64" | 0.1406" | 2" | 0.5" | Round | 9/64" | Split | 0000000 | 00000 |
| 11/64" | 0.1719" | 2 1/2" | 0.6" | Round | 11/64" | Split | 0000000 | 00000 |
| 3/16" | 0.1875" | 2 1/2" | 0.6" | Round | 3/16" | Split | 0000000 | 00000 |
| 7/32" | 0.2188" | 2 1/2" | 0.8" | Round | 7/32" | Split | 0000000 | 00000 |
| 1/4" | 0.25" | 2 1/2" | 0.8" | Round | 1/4" | Split | 0000000 | 00000 |
| 5/16" | 0.3125" | 2 3/4" | 1" | Round | 5/16" | Split | 0000000 | 00000 |
| 3/8" | 0.375" | 3" | 1" | Round | 3/8" | Split | 0000000 | 000000 |
| 1/2" | 0.5" | 3" | 1" | Round | 1/2" | Split | 0000000 | 000000 |