McMaster-Carr

Search Results

	Shape Shape


Rod and Disc	Round Tube

Sheet and Bar	Film

	Diameter Diameter

	Thickness Thickness

	Width Width

	Length Length

	Color Color

	Beige
	Black

	Performance Properties Performance Properties

High Strength

High Temperature

Low Thermal Expansion

	Flexibility Flexibility

	Semi-Rigid
	Rigid

	Comparable To Comparable To

Ketron

TecaPEEK

	Friction Rating Friction Rating

Slippery

Very Slippery

Not Rated

	Thermal Stability Thermal Stability

Excellent

Good

Not Rated

	Tensile Strength Rating Tensile Strength Rating

Excellent

Good

	Tensile Strength Tensile Strength

	Tolerance Rating Tolerance Rating

Oversized

Standard

	For Use With For Use With

	Clarity Clarity

Semi-Clear

Opaque

	Specifications Met Specifications Met

ASTM

FDA

Mil. Spec.

	Electrical Insulation Rating Electrical Insulation Rating

Excellent

Good

Not Rated

	Flexural Modulus Flexural Modulus

530,000-600,000 psi

1,000,000 psi

1,100,000 psi

	Maximum Temperature Maximum Temperature

	Dielectric Strength Dielectric Strength

	Density Density

	Hardness Hardness

173 Products

About Plastic

Color: Beige or Black
Temperature Range: -20° to 480° F
Tensile Strength: 14,000-16,000 psi (Excellent)
Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
Hardness: Rockwell R126 (Hard)
For Use Outdoors: No
Specifications Met:
Beige: ASTM D6262, Made of FDA Listed Material, UL 94V0
Black: ASTM D6262, UL 94V0

Even when exposed to chemicals, these rods and discs remain wear resistant. Made of PEEK, they stand up to repetitive processes as well as abrasion. They’re sometimes used as a lightweight substitute for metal parts in high-stress applications.

Rods

			Beige		Black
Dia.	Dia. Tolerance	Lengths, ft.		Per Ft.		Per Ft.
1/4"	0.000" to 0.015"	1, 2, 3, 4	00000000	00000	0000000	00000
3/8"	0.000" to 0.015"	1, 2, 3, 4	00000000	00000	0000000	00000
1/2"	0.000" to 0.015"	1, 2, 3, 4	00000000	00000	0000000	00000
5/8"	0.000" to 0.015"	1, 2, 3, 4	00000000	00000	0000000	00000
3/4"	0.000" to 0.015"	1, 2, 3, 4	00000000	00000	0000000	00000
1"	0.000" to 0.015"	1, 2, 3, 4	00000000	00000	0000000	00000
1 1/4"	0.000" to 0.015"	1, 2, 3, 4	00000000	000000	0000000	000000
1 1/2"	0.000" to 0.015"	1, 2, 3, 4	00000000	000000	0000000	000000
2"	0.000" to 0.015"	1, 2, 3, 4	00000000	000000	0000000	000000
2 1/2"	0.000" to 0.015"	1, 2, 3, 4	00000000	000000	000000	00
3"	0.000" to 0.250"	1, 2, 3, 4	0000000	000000	000000	00
4"	0.000" to 0.250"	1, 2, 3, 4	0000000	00000000	000000	00

Discs

		Beige		Black
Dia.	Dia. Tolerance		Each		Each
3" Lg.
1"	0.000" to 0.015"	0000000	000000	0000000	000000
1 1/2"	0.000" to 0.015"	0000000	00000	0000000	00000
2"	0.000" to 0.015"	0000000	00000	0000000	00000
2 1/2"	0.000" to 0.015"	0000000	000000	000000	00
3"	0.000" to 0.250"	0000000	000000	000000	00
6" Lg.
1"	0.000" to 0.015"	0000000	00000	0000000	00000
1 1/2"	0.000" to 0.015"	0000000	00000	0000000	00000
2"	0.000" to 0.015"	0000000	000000	0000000	000000
2 1/2"	0.000" to 0.015"	0000000	000000	000000	00
3"	0.000" to 0.250"	0000000	000000	000000	00
9" Lg.
1"	0.000" to 0.015"	0000000	00000	0000000	00000
1 1/2"	0.000" to 0.015"	0000000	000000	0000000	000000
2"	0.000" to 0.015"	0000000	000000	0000000	000000
2 1/2"	0.000" to 0.015"	0000000	000000	000000	00
3"	0.000" to 0.250"	0000000	000000	000000	00

Wear- and Chemical-Resistant PEEK Sheets and Bars

With superior wear resistance in repetitive processes, these sheets and bars resist wear caused by abrasion. PEEK is often used as a lightweight substitute for metal parts in chemical-processing applications.

Sheets

Color: Beige
Temperature Range: -20° to 480° F
Tensile Strength: 14,000-16,000 psi (Excellent)
Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
Hardness: Rockwell R126 (Hard)
For Use Outdoors: No
Specifications Met:
1/16" to 1/8" Thickness: Made of FDA Listed Material
1/4" to 1 1/2" Thickness: UL 94V0, Made of FDA Listed Material, MIL-P-46183

6" × 6"
Thick.	Thick. Tolerance		Each
1/16"	-0.005" to 0.005"	0000000	000000
5/64"	-0.01" to 0.01"	0000000	00000
3/32"	-0.01" to 0.01"	0000000	00000
1/8"	-0.01" to 0.025"	0000000	00000
1/4"	-0.01" to 0.025"	0000000	00000
3/8"	-0.01" to 0.025"	0000000	000000
1/2"	-0.01" to 0.025"	0000000	000000
5/8"	-0.01" to 0.025"	0000000	000000
3/4"	-0.01" to 0.025"	0000000	000000
1"	-0.01" to 0.025"	0000000	000000
1 1/4"	-0.01" to 0.025"	0000000	000000
1 1/2"	-0.01" to 0.025"	0000000	000000
6" × 12"
1/16"	-0.005" to 0.005"	0000000	00000
5/64"	-0.01" to 0.01"	0000000	000000
3/32"	-0.01" to 0.01"	0000000	000000
1/8"	-0.01" to 0.025"	0000000	000000
1/4"	-0.01" to 0.025"	00000000	000000
3/8"	-0.01" to 0.025"	00000000	000000
1/2"	-0.01" to 0.025"	00000000	000000
5/8"	-0.01" to 0.025"	00000000	000000
3/4"	-0.01" to 0.025"	00000000	000000
1"	-0.01" to 0.025"	00000000	000000
1 1/4"	-0.01" to 0.025"	00000000	000000
1 1/2"	-0.01" to 0.025"	00000000	000000
12" × 12"
1/16"	-0.005" to 0.005"	0000000	000000
5/64"	-0.01" to 0.01"	0000000	000000
3/32"	-0.01" to 0.01"	0000000	000000
1/8"	-0.01" to 0.025"	0000000	000000
1/4"	-0.01" to 0.025"	0000000	000000
3/8"	-0.01" to 0.025"	0000000	000000
1/2"	-0.01" to 0.025"	0000000	000000
5/8"	-0.01" to 0.025"	0000000	000000
3/4"	-0.01" to 0.025"	0000000	000000
1"	-0.01" to 0.025"	0000000	000000
1 1/4"	-0.01" to 0.025"	0000000	00000000
1 1/2"	-0.01" to 0.025"	0000000	00000000

Bars

Color: Beige
Temperature Range: -20° to 480° F
Tensile Strength: 14,000-16,000 psi (Excellent)
Impact Strength: 0.6-0.95 ft.-lbs./in. (Poor)
Hardness: Rockwell R126 (Hard)
For Use Outdoors: Yes
Specifications Met: UL 94V0, Made of FDA Listed Material, MIL-P-46183

1/4" Thick. (0" to 0.025")
Wd.	Lengths, ft.		Per Ft.
1"	1, 2, 4	00000000	000000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	00000
2 1/2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	00000
4"	1, 2, 4	00000000	000000
3/8" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	00000
2 1/2"	1, 2, 4	00000000	00000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000
1/2" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	00000
2"	1, 2, 4	00000000	000000
2 1/2"	1, 2, 4	00000000	000000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000
5/8" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	000000
2"	1, 2, 4	00000000	000000
2 1/2"	1, 2, 4	00000000	000000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000
3/4" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	00000
1 1/2"	1, 2, 4	00000000	000000
2"	1, 2, 4	00000000	000000
2 1/2"	1, 2, 4	00000000	000000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000
1" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	000000
1 1/2"	1, 2, 4	00000000	000000
2"	1, 2, 4	00000000	000000
2 1/2"	1, 2, 4	00000000	000000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000
1 1/4" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	000000
1 1/2"	1, 2, 4	00000000	000000
2"	1, 2, 4	00000000	000000
2 1/2"	1, 2, 4	00000000	000000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000
1 1/2" Thick. (0" to 0.025")
1"	1, 2, 4	00000000	000000
1 1/2"	1, 2, 4	00000000	000000
2"	1, 2, 4	00000000	000000
2 1/2"	1, 2, 4	00000000	000000
3"	1, 2, 4	00000000	000000
4"	1, 2, 4	00000000	000000

Wear- and Chemical-Resistant PEEK Tubes

Color: Beige
Temperature Range: -75° to 500° F
Tensile Strength: 14,100 psi (Excellent)
Impact Strength: 1.57 ft.-lbs./in. (Poor)
Hardness: Rockwell R70 (Hard)
For Use Outdoors: No
Specifications Met: Made of FDA Listed Material

Sometimes used as a lightweight substitute for metal parts in chemical-processing applications, these tubes resist wear from repetitive processes, as well as wear caused by abrasion. The OD is oversized and the ID is undersized for finishing to the sizes listed.

For technical drawings and 3-D models, click on a part number.

Oversized Tubes

1/16" Wall Thick.
OD	OD Tolerance	ID	ID Tolerance	Lengths, ft.		Per Ft.
3/8"	0" to 0.015"	1/4"	-0.015" to 0"	1, 2, 4	000000	000000
1/8" Wall Thick.
1/2"	0" to 0.02"	1/4"	-0.02" to 0"	1, 2, 4	000000	00000
1/4" Wall Thick.
3/4"	0" to 0.025"	1/4"	-0.025" to 0"	1, 2, 4	000000	00000
1"	0" to 0.03"	1/2"	-0.03" to 0"	1, 2, 4	000000	00000
1 1/2"	0" to 0.035"	1"	-0.035" to 0"	1, 2, 4	000000	000000
1/2" Wall Thick.
2"	0" to 0.04"	1"	-0.04" to 0"	1, 2, 4	000000	000000

Wear- and Chemical-Resistant PEEK Film

In addition to offering excellent chemical resistance, this PEEK film is strong and wear resistant.

Film

Color: Semi-Clear Beige
Max. Temperature: 460° F
Tensile Strength: 17,400 psi (Excellent)
Impact Strength: Not Rated
Hardness: Not Rated (Hard)
For Use Outdoors: Yes

6" × 6"
Thick.	Thick. Tolerance		Each
0.003"	-0.0003" to 0.0003"	0000000	00000
0.005"	-0.0005" to 0.0005"	0000000	00000
0.01"	-0.001" to 0.001"	0000000	00000
0.015"	-0.0015" to 0.0015"	00000000	00000
0.02"	-0.002" to 0.002"	00000000	00000
0.03"	-0.003" to 0.003"	00000000	00000
12" × 12"
0.003"	-0.0003" to 0.0003"	0000000	00000
0.005"	-0.0005" to 0.0005"	0000000	00000
0.01"	-0.001" to 0.001"	0000000	00000
0.015"	-0.0015" to 0.0015"	00000000	00000
0.02"	-0.002" to 0.002"	00000000	00000
0.03"	-0.003" to 0.003"	00000000	000000
24" × 24"
0.003"	-0.0003" to 0.0003"	0000000	00000
0.005"	-0.0005" to 0.0005"	0000000	000000
0.01"	-0.001" to 0.001"	0000000	000000
0.015"	-0.0015" to 0.0015"	00000000	000000
0.02"	-0.002" to 0.002"	00000000	000000

Adhesive-Back Film

Color: Semi-Clear Beige
Temperature Range: -40° to 350° F
Tensile Strength: 17,400 psi (Excellent)
Impact Strength: Not Rated
Hardness: Not Rated (Hard)
For Use Outdoors: Yes

6" × 6"
Thick.	Thick. Tolerance	Adhesive Type		Each
0.002"	-0.0002" to 0.0002"	Acrylic	0000000	00000
0.005"	-0.0005" to 0.0005"	Acrylic	0000000	00000
0.01"	-0.001" to 0.001"	Acrylic	0000000	00000
12" × 12"
0.002"	-0.0002" to 0.0002"	Acrylic	0000000	00000
0.005"	-0.0005" to 0.0005"	Acrylic	0000000	00000
0.01"	-0.001" to 0.001"	Acrylic	0000000	00000
12" × 18"
0.002"	-0.0002" to 0.0002"	Acrylic	0000000	00000
0.005"	-0.0005" to 0.0005"	Acrylic	0000000	00000
0.01"	-0.001" to 0.001"	Acrylic	0000000	000000

Slippery Carbon-Filled Wear-
and Chemical-Resistant PEEK

Color: Black
Max. Temperature: 480° F
Tensile Strength: 11,000 psi (Good)
Impact Strength: 0.7 ft-lbs./in.
Hardness: Rockwell M85 (Hard)
For Use Outdoors: No

Carbon enhances the stiffness of these rods, while the addition of PTFE ensures a slippery surface. PEEK is chemical resistant and stands up to wear caused by rubbing in repetitive processes, as well as by abrasion. It is sometimes used as a lightweight substitute for metal.

Dia.	Tolerance Rating	Lengths, ft.		Per Ft.
1/4"	Standard	1, 3	0000000	000000
3/8"	Standard	1, 3	0000000	00000
1/2"	Standard	1, 3	0000000	00000
5/8"	Standard	1, 3	0000000	00000
3/4"	Standard	1, 3	0000000	00000
1"	Standard	1, 3	0000000	000000
1 1/4"	Standard	1, 3	0000000	000000
1 1/2"	Standard	1, 3	0000000	000000

Durable Glass-Filled Wear-
and Chemical-Resistant PEEK

Color: Beige
Temperature Range: 32° to 480° F
Tensile Strength: 14,000 psi (Excellent)
Impact Strength: 0.8-1.8 ft.-lbs./in. (Poor)
Hardness: Rockwell R126 (Hard)
For Use Outdoors: No
Specifications Met: ASTM D6262, UL 94V0

A glass filler is added to these PEEK rods for increased durability over standard PEEK in high-stress structural applications. PEEK is chemical resistant and stands up to wear caused by rubbing in repetitive processes, as well as by abrasion. It is sometimes used as a lightweight substitute for metal.

Dia.	Dia. Tolerance	Lengths, ft.		Per Ft.
1/2"	0.000" to 0.025"	1, 2, 3, 4	0000000	000000
1"	0.000" to 0.025"	1, 2, 3, 4	0000000	000000
1 1/4"	0.000" to 0.025"	1, 2, 3, 4	0000000	000000
1 1/2"	0.000" to 0.025"	1, 2, 3, 4	0000000	000000

Terms and Conditions and Privacy Policy