We will reply to your message within an hour.
Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.
Press these metric nuts into a drilled or punched hole with an arbor press or similar pressure tool.
These nuts have good chemical resistance and may be mildly magnetic.
These metric nuts have good chemical resistance and may be mildly magnetic.
A flat hex head sits flush against the material surface for use in low-clearance applications.
Stainless steel press-fit nuts have excellent corrosion resistance in most environments.
These press-fit nuts have a zinc plating for corrosion resistance in wet environments.
These press-fit nuts have a nylon insert that grips threads to resist loosening.
These tools include everything you need to install press-fit nuts by hand.
Also known as broach style captive nuts, these metric nuts have good chemical resistance and may be mildly magnetic.
Also known as broach style captive nuts, these nuts have good chemical resistance and may be mildly magnetic.
These press-fit nuts are tin plated to resist corrosion from chemicals and salt water.
About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.
The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.
These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.
A hex-shaped body provides the highest twist resistance of any rivet nut.
Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.
The thread area is enclosed, which prevents leakage past the threads from either side of your application.
A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.
Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.
18-8 stainless steel studs have good chemical resistance.
These steel studs are zinc plated to resist corrosion in wet environments.
Also known as captive standoffs, a recess under the hex clinches the panel for a strong hold that won't push, pull, or twist out. When mounted, the hex sits flush with the surface and the closed end creates a neat, finished appearance.
A recess under the hex clinches a panel for a strong hold that won't push, pull, or twist out. When mounted with a lever press, the hex sits flush with the surface and the open end creates a through hole.
These standoffs are designed to fit in the limited space of compact electronics such as laptops and hand-held devices.
Once the end is clinched in place, panels with keyholes easily slide on and off these supports.
With the end clinched in place, the prongs allow you to quickly snap a panel on and off these supports.
Position, pivot, and align components. Also known as pilot pins and PEM® TP4, TPS, and MPP pins.
The grooves in these pins grip plastics and other soft materials. Press them in to hold panels together. Also known as PEM® TKA and TK4 TackSert pins.
Often used in cell phones and laptops, these pins attach thin panels such as printed circuit boards to metal and plastic bases. Also known as PEM® TA and T4 TackPins.
The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.
Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.
Install these inserts into plastic parts to create a secure base for fasteners.
With the male threaded end on these inserts, mount components directly to plastic parts.
These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.
Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.
These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.
Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.
The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.
These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.
70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.
The barbed sides keep these securely in place even before a screw is installed.
Use these inserts to install fine-thread screws in existing holes.
Push down on the inside of these inserts with an installation tool and they expand to hold firm in surrounding material.
Made of 18-8 stainless steel, these inserts have good corrosion resistance.
A black-phosphate finish provides mild corrosion resistance.
The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.
These inserts are made to stringent military specifications.
These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.
Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.
The knurled body holds these inserts in place in aluminum and other soft metals. Use an arbor press to install them in untapped holes.
Press these inserts into a drilled hole and the flexible metal teeth anchor them in the material. Use them with carbon fiber, fiberglass, and garolite.
A ribbed-shaped body holds the nut in place so it won't move when tightening a screw. Assortments contain rivet nuts, mandrels, nosepieces, and a plier-style installation tool.