We will reply to your message within an hour.
These nuts have good chemical resistance and may be mildly magnetic.
These metric nuts have good chemical resistance and may be mildly magnetic.
Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.
Press these metric nuts into a drilled or punched hole with an arbor press or similar pressure tool.
A flat hex head sits flush against the material surface for use in low-clearance applications.
Stainless steel press-fit nuts have excellent corrosion resistance in most environments.
These press-fit nuts have a zinc plating for corrosion resistance in wet environments.
These press-fit nuts have a nylon insert that grips threads to resist loosening.
Also known as broach style captive nuts, these nuts have good chemical resistance and may be mildly magnetic.
Also known as broach style captive nuts, these metric nuts have good chemical resistance and may be mildly magnetic.
These press-fit nuts are tin plated to resist corrosion from chemicals and salt water.
Also known as captive standoffs, a recess under the hex clinches the panel for a strong hold that won't push, pull, or twist out. When mounted, the hex sits flush with the surface and the closed end creates a neat, finished appearance.
A recess under the hex clinches a panel for a strong hold that won't push, pull, or twist out. When mounted with a lever press, the hex sits flush with the surface and the open end creates a through hole.
These standoffs are designed to fit in the limited space of compact electronics such as laptops and hand-held devices.
With the end clinched in place, the prongs allow you to quickly snap a panel on and off these supports.
Once the end is clinched in place, panels with keyholes easily slide on and off these supports.
These steel studs are zinc plated to resist corrosion in wet environments.
18-8 stainless steel studs have good chemical resistance.
Position, pivot, and align components. Also known as pilot pins and PEM® TP4, TPS, and MPP pins.
Often used in cell phones and laptops, these pins attach thin panels such as printed circuit boards to metal and plastic bases. Also known as PEM® TA and T4 TackPins.
The grooves in these pins grip plastics and other soft materials. Press them in to hold panels together. Also known as PEM® TKA and TK4 TackSert pins.